ELECTRICAL TEST TOOLS Tester, Splitter and Detector Outlet Tester Model OT-2 FEATURES APPLICATIONS * * * * * Test GFCI for proper operation * 120V - three-wire US Detects faulty wiring in three-wire receptacles Detects open grounds and neutrals Detects reversed hot/ground c onnections Simply plug in and note red and amber indicators * For use on 100 to 125Vac AC Line Splitter Model ALS-1 For use with clamp-on meters & multimeters using current probes FEATURES * A voids splitting lines - makes reading current easy * Increases sensitivity of clamp-on current probes and clamp-on meters ten times in X10 mode * Direct reading X1 mode * Voltmeter input jacks *Integral ground conductor * Facilitates reading current draw of device plugged into it * Facilitates reading current draw through extension cords * 120V, 15A capacity Non-Contact AC Voltage Detector Model NC-1 SPECIFICATIONS MODEL Voltage Sensitivity Frequency Detection Distance Over Voltage Battery Safety NC-1 120 to 240VAC 50/60Hz <5mm 600V CAT III 2 x 1.5V AAA Alkaline (included) For indoor use and in accordance with over voltage 600V CAT III, Pollution Degree 2 CATALOG NO. DESCRIPTION 2121.03 2121.05 2121.09 Outlet/GFCI Tester Model OT-2 (110V US) AC Line Splitter Model ALS-1 Non-Contact AC Voltage Detector Model NC-1 Technical Assistance (800) 343-1391