US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
AEC
Q200 85°C
+
Common mode Cutoff
Part peak impedance frequency2 Inductance
DCR max4 Isolation5 Current6
number1 Lines (kOhms) (GHz) min (µH)3 (mOhms) (Vrms) (mAdc)
PDLF4000L_ 4 0.949 @ 210 MHz 1.1 5.0 250 300 100
PDLF4500L_ 4 0.848 @ 200 MHz 0.88 5.0 200 300 500
PDLF3000L_ 3 0.901 @ 280 MHz 1.4 5.0 250 300 100
PDLF3500L_ 3 0.910 @ 210 MHz 1.1 5.0 200 300 500
PDLF2000L_ 2 0.958 @ 280 MHz 1.3 5.0 250 300 100
PDLF2500L_ 2 0.929 @ 250 MHz 1.2 5.0 200 300 500
SMT Data Line EMI Filters
–
PDLF
Document 491-1
Document 491-1 Revised 11/30/18
1. When ordering, please specify packaging code:
PDLF4500LC
C = 7″ machine ready reel. EIA-481 embossed plastic tape (500 parts
per full reel).
D = 13″ machine ready reel. EIA-481 embossed plastic tape
(2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader
and trailer added ($25 charge), use code letter D instead.
2 Frequency at which the differential mode attenuation equals −3 dB
3 Inductance shown for each winding, measured at 1 MHz
4 DCR is for each winding.
5 Interwinding isolation (hipot) tested for one minute.
6. Current rating is for each line.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Designer’s Kit D303 contains four each of all values plus DLF and
CCDLF filters
Core material Ferrite
Terminations RoHS compliant tin-silver-copper over tin over nickel
over phos bronze. Other terminations available at additional cost.
Weight 183 – 201 mg
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Packaging 500/7″reel; 2000/13″ reel Plastic tape: 16 mm wide,
0.35 mm thick, 8 mm pocket spacing, 4.4 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
• Available in 4, 3 and 2-line versions
• See our CCDLF series for 10 and 8-line EMI filters
• Exceptional common mode noise attenuation from 15 MHz
to 300 MHz; passes signal line data below 300 MHz with
minimal attenuation
• DC current capacity of 500 or 100 mA.
• Excellent electrical isolation (300 Vrms)
Sample
& buy
Support
& FAQ
Web
page
Tools &
softw
are
PDLF Surface Mount Data Line EMI Filters
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
AEC
Q200 85°C
+
Document 491-2
0.138 ±0.008
3,50 ±0,20
0.217 ±0.006
5,50 ±0,15
1
4
0.317 ±0.012
8,05 ±0,30
0.020
0,50
0.012
0,305
0.098
2,50
0.050
1,27 cen
0.0395
1,00
Dot indicates pin 1
0.236
6,00
Dimensions are typical
prior to applying solder
0.050
1,27 cen
0.060
1,52
0.030
0,76
Recommended
Land Pattern
0.200
5,08
8
1
7
2
6
3
5
4
PDLF4000, 4500
8
1
7
2
6
3
5
4
PDLF3000, 3500
8
1
7
2
6
3
5
4
PDLF2000, 2500
5
8
1
45
8
0.307 ±0.008
7,80 ±0,20
0.007/0,18
1
4
5
8
PDLF
XXXXL
*
**
inches
mm
Dimensions are in
Document 491-2 Revised 11/30/18
30
20
10
0
0.1 110 100 1000
Frequency (MHz)
Attenuation (dB)
Common Mode
Differential Mode
* Measured on HP 8753D network analyzer. Ref: 50 Ohms.
Typical Response*
0.1
1.0
10
100
1000
10,000
Impedance (Ohms)
1.0 10 1000100
Differential Mode
Common Mode
Frequency (MHz)
Typical Impedance
