KP 1830
Vishay Roederstein
AC and Pulse Film Foil Capacitors
KP Radial Potted Type
www.vishay.com For technical questions, contact: dc-film@vishay.com Document Number: 26016
212 Revision: 16-Jan-09
Dimensions in millimeters
MAIN APPLICATIONS
Oscillator, timing and LC/RC filter circuits, high frequency
coupling of fast digital and analog IC’s.
REFERENCE STANDARDS
IEC 60384-13
MARKING
C-value; tolerance; rated voltage; sub-class; manufacturer’s
type; code for dielectric material; manufacturer’s location;
manufacturer’s logo; year and week
DIELECTRIC
Polypropylene film
ELECTRODES
Aluminum foil
CONSTRUCTION
Mono construction
RATED DC VOLTAGES
63 V, 250 V, 630 V
RATED AC VOLTAGES
40 V, 160 V, 250 V
FEATURES
5 mm lead pitch, supplied loose in box taped in
ammopack or reel
RoHS compliant
ENCAPSULATION
Plastic case, epoxy resin sealed, flame retardant
UL-class 94 V-0
CLIMATIC TESTING CLASS ACC. TO IEC 60068-1
55/100/56
CAPACITANCE RANGE
100 pF to 0.022 µF
CAPACITANCE TOLERANCE
± 10 % , ± 5 %, ± 2.5 %, ± 2 %, ± 1 %
LEADS
Tinned wire
MAXIMUM APLICATION TEMPERATURE
100 °C
DETAIL SPECIFICATION
For more detailed data and test requirements contact:
dc-film@vishay.com
W max. Marking
H
max.
±0.4
6.0-1
L max.
0.5
pcm
5.0 0.4
Ø 0.5
±
Document Number: 26016 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 16-Jan-09 213
KP 1830
AC and Pulse Film Foil Capacitors
KP Radial Potted Type Vishay Roederstein
COMPOSITION OF CATALOG NUMBER
SPECIFIC REFERENCE DATA
KP 1830 2 10 63 4 G
CAPACITANCE
(numerically)
Example:
110 0.1 nF 100 pF
210 1.0 nF 1.0 nF
310 10 nF 10 nF
MULTIPLIER
(nF)
0.01 1
0.1 2
13
TYPE CONSTRUCTION VOLTAGE CODE
06 = 63 Vdc
25 = 250 Vdc
63 = 630 Vdc
PACKAGING CODE
Bulk
G Ammo (H = 18.5)
WReel (H = 18.5)
TOLERANCE CODE
1± 1 %
2± 2 %
3± 2.5 %
4± 5 %
5 ± 10 %
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz at 1 MHz
C ≤ 1000 pF - 5 x 10-4 -10 x 10-4
1000 pF < C ≤ 5000 pF -5 x 10-4 10 x 10-4 -
5000 pF < C ≤ 20 000 pF -10 x 10-4 15 x 10-4 -
20 000 pF < C < 33 000 pF -15 x 10-4 25 x 10-4 -
Pitch (mm) Maximum pulse rise time (dU/dt)R [V/µs]
5 > 10 000
R between leads, for C ≤0.33 µF at 100 V, 1 min > 500 000 MΩ
R between leads and case, 100 V, 1 min > 30 000 MΩ
Withstanding (DC) voltage (cut off current 10 mA), rise time 100 V/s 1.6 x URdc, 1 min
Withstanding (DC) voltage between leads and case 2 x URdc, 1 min
Maximum application temperature 100 °C
KP 1830
Vishay Roederstein AC and Pulse Film Foil Capacitors
KP Radial Potted Type
www.vishay.com For technical questions, contact: dc-film@vishay.com Document Number: 26016
214 Revision: 16-Jan-09
Note
Further C-values upon request
CAPACITANCE CAPACITANCE
CODE
VOLTAGE CODE 06
63 Vdc/40 Vac
VOLTAGE CODE 25
250 Vdc/160 Vac
VOLTAGE CODE 63
630 Vdc/250 Vac
W H (mm) L (mm) W H (mm) L (mm) W H (mm) L (mm)
100 pF -110 ------4.56.07.2
110 pF -111 ------4.56.07.2
120 pF -112 ------4.56.07.2
130 pF -113 ------4.56.07.2
150 pF -115 ------4.56.07.2
160 pF -116 ------4.56.07.2
180 pF -118 ------4.56.07.2
200 pF -120 ------4.56.07.2
220 pF -122 ------4.56.07.2
240 pF -124 ------4.56.07.2
270 pF -127 ------4.56.07.2
300 pF -130 ------4.56.07.2
330 pF -133 ------4.56.07.2
360 pF -136 ------4.56.07.2
390 pF -139 ------4.56.07.2
430 pF -143 ------4.56.07.2
470 pF -147 ------4.56.07.2
510 pF -151 ------4.56.07.2
560 pF -156 ------4.56.07.2
620 pF -162 ------4.56.07.2
680 pF -168 ------4.56.07.2
750 pF -175 ------4.56.07.2
820 pF -185 ------4.56.07.2
910 pF -191 ------4.56.07.2
1000 pF -210 ------4.56.07.2
1100 pF -211 ------4.56.07.2
1200 pF -212 ------4.56.07.2
1300 pF -213 ------4.56.07.2
1500 pF -215 ------4.56.07.2
1600 pF -216 ------4.56.07.2
1800 pF -218 ------4.56.07.2
2000 pF -220 - - - 4.5 6.0 7.2 5.5 7.0 7.2
2200 pF -222 - - - 4.5 6.0 7.2 5.5 7.0 7.2
2400 pF -224 4.5 6.0 7.2 4.5 6.0 7.2 5.5 7.0 7.2
2700 pF -227 4.5 6.0 7.2 4.5 6.0 7.2 5.5 7.0 7.2
3000 pF -230 4.5 6.0 7.2 5.5 7.0 7.2 5.5 7.0 7.2
3300 pF -233 4.5 6.0 7.2 5.5 7.0 7.2 5.5 7.0 7.2
3600 pF -236 4.5 6.0 7.2 5.5 7.0 7.2 7.5 7.0 7.2
3900 pF -239 4.5 6.0 7.2 5.5 7.0 7.2 7.5 9.0 7.2
4300 pF -243 4.5 6.0 7.2 5.5 7.0 7.2 7.5 9.0 7.2
4700 pF -247 4.5 6.0 7.2 5.5 7.0 7.2 7.5 9.0 7.2
5100 pF -251 4.5 6.0 7.2 7.5 9.0 7.2 7.5 9.0 7.2
5600 pF -256 4.5 6.0 7.2 7.5 9.0 7.2 7.5 9.0 7.2
6200 pF -262 4.5 6.0 7.2 7.5 9.0 7.2 7.5 9.0 7.2
6800 pF -268 4.5 6.0 7.2 7.5 9.0 7.2 7.5 9.0 7.2
7500 pF -275 5.5 7.0 7.2 7.5 9.0 7.2 9.0 10.0 7.2
8200 pF -282 5.5 7.0 7.2 7.5 9.0 7.2 9.0 10.0 7.2
9100 pF -291 5.5 7.0 7.2 7.5 9.0 7.2 9.0 10.0 7.2
0.01 µF -310 5.5 7.0 7.2 7.5 9.0 7.2 9.0 10.0 7.2
0.011 µF -311 5.5 7.0 7.2 9.0 10.0 7.2 - - -
0.012 µF -312 5.5 7.0 7.2 9.0 10.0 7.2 - - -
0.013 µF -313 5.5 7.0 7.2 9.0 10.0 7.2 - - -
0.015 µF -315 5.5 7.0 7.2 9.0 10.0 7.2 - - -
0.016 µF -316 9.0 10.0 7.2 - -----
0.018 µF -318 9.010.07.2------
0.020 µF -320 9.010.07.2------
0.022 µF -322 7.59.07.2------
Document Number: 26016 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 16-Jan-09 215
KP 1830
AC and Pulse Film Foil Capacitors
KP Radial Potted Type Vishay Roederstein
RECOMMENDED PACKAGING
Note
(1) S = Box size 55 mm x 210 mm x 340 mm (W x H x L)
EXAMPLE OF ORDERING CODE
Note
For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139 or end of catalog
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting on printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to “Packaging information” www.vishay.com/doc?28139 or end of catalog
Specific Method of Mounting of Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board.
•For pitches ≤ 15 mm the capacitors shall be mechanically fixed by the leads
•For larger pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed-Circuit Board
The maximum length and width of film capacitors is shown in the drawing:
• Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned
•Product height with seating plane as given by “IEC 60717” as reference: hmax. ≤ h + 0.4 mm or hmax. ≤ h’ + 0.4 mm
Storage Temperature
•Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C ± 1 °C, an atmospheric pressure
of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
LETTER
CODE
TYPE OF
PACKAGING
HEIGHT (H)
(mm)
REEL DIAMETER
(mm)
ORDERING CODE
EXAMPLE
PITCH
5
G Ammo 18.5 S (1) KP 1830-310-065-G X
WReel 18.5 350 KP 1830-310-065-WX
- Bulk - - KP 1830-310-065 X
TYPE CAPACITANCE CODE VOLTAGE CODE TOLERANCE CODE PACKAGING CODE
KP 1830 210 63 1 G
Tolerance codes: 1 = 1 % (F); 2 = 2 % (G); 3 = 2.5 % (H); 4 = 5 % (J); 5 = 10 % (K)
Eccentricity
Imax. = I + 0.3 mm
bmax. = b + 0.3 mm
KP 1830
Vishay Roederstein AC and Pulse Film Foil Capacitors
KP Radial Potted Type
www.vishay.com For technical questions, contact: dc-film@vishay.com Document Number: 26016
216 Revision: 16-Jan-09
CHARACTERISTICS
Capacitance as a function of ambient temperature (typical curve) Impedance as a function of frequency (typical curve)
Max. DC and AC voltage as a function of temperature Max. RMS voltage as a function of frequency
Max. RMS voltage as a function of frequency Max. RMS voltage as a function of frequency
- 60 - 40 - 20 020 40 60 80100 120
Tamb (°C)
- 4
- 3
- 5
- 6
- 2
- 1
0
3
1
2
4
ΔC/C (%)
2200 pF
680 pF
220 pF
10
1
0.1
0.01 110 100 1000
f (MHz)
Impedance versus Frequency Z = f (f) (Lead length 2.0 mm)
4700 pF
100 pF
Z (Ω)
0.033 µF
0.001 µF
- 60 - 20 20 60 100 Tamb (°C)
factor
0.0
0.2
0.4
0.6
0.8
1.0
1.2
f (Hz)
10
3
10
2
10
4
10
5
AC Voltage
(V)
102
101
3300 pF
6800 pF
0.015 µF
Tamb ≤ 100 °C, 63 Vdc
f (Hz)
103
102 104105106
AC Voltage
(V)
103
101
102
Tamb ≤ 100 °C, 250 Vdc
2200 pF
4700 pF
0.01 µF
f (Hz)
10
3
10
2
10
4
10
5
10
6
10
7
AC Voltage
(V)
103
101
102
100 pF
220 pF
470 pF
1000 pF
T
amb
≤ 100 °C, 630 Vdc
Document Number: 26016 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 16-Jan-09 217
KP 1830
AC and Pulse Film Foil Capacitors
KP Radial Potted Type Vishay Roederstein
HEAT CONDUCTIVITY (G) AS A FUNCTION OF ORIGINAL PITCH AND CAPACITOR BODY THICKNESS IN mW/°C
POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of
the free air ambient temperature.
The power dissipation can be calculated according type detail specification “HQN-384-01/101: Technical Information Film
Capacitors” with the typical tgd of the curves.
The component temperature rise (ΔT) can be measured (see section “Measuring the component temperature” for more details)
or calculated by ΔT = P/G:
ΔT = Component temperature rise (°C)
•P = Power dissipation of the component (mW)
•G = Heat conductivity of the component (mW/°C)
MEASURING THE COMPONENT TEMPERATURE
A thermocouple must be attached to the capacitor body as in:
The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc).
The temperature rise is given by ΔT = Tc - Tamb.
To avoid radiation or convection, the capacitor should be tested in a wind-free box.
APPLICATION NOTE AND LIMITING CONDITIONS
To select the capacitor for a certain application, the following conditions must be checked:
1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc)
2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum (Up-p) to avoid the ionisation inception level
3. The maximum component surface temperature rise must be lower than the limits
4. The maximum application temperature must be lower than 105 °C
5. There is no limit for the voltage pulse slope in the application
Wmax. (mm) HEAT CONDUCTIVITY (mW/°C)
PITCH 5 mm
4.5 3
5.5 4
7.5 6
9.0 7
Thermocouple
KP 1830
Vishay Roederstein AC and Pulse Film Foil Capacitors
KP Radial Potted Type
www.vishay.com For technical questions, contact: dc-film@vishay.com Document Number: 26016
218 Revision: 16-Jan-09
INSPECTION REQUIREMENTS
General Notes:
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-13 and
Specific Reference Data”.
Group C Inspection Requirements
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.1 Dimensions (detail) As specified in chapters “General Data” of
this specification
4.3.1 Initial measurements Capacitance at 1 kHz
Tangent of loss angle at 100 kHz
4.3 Robustness of terminations Tensile: Load 10 N; 10 s
Bending: Load 5 N; 4 x 90°
No visible damage
4.4 Resistance to soldering heat No predrying
Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 5 s
4.14 Component solvent resistance Isopropylalcohol at room temperature
Method: 2
Immersion time: 5.0 min ± 0.5 min
Recovery time: Min. 1 h, max. 2 h
4.4.2 Final measurements Visual examination No visible damage
Legible marking
Capacitance |ΔC/C| ≤ 2 % of the value measured in 4.3.1
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
4.6.1 Initial measurements Capacitance at 1 kHz
Tangent of loss angle at 100 kHz
4.14 Solvent resistance of the marking Isopropylalcohol at room temperature
Method: 1
Rubbing material: cotton wool
Immersion time: 5.0 min ± 0.5 min
No visible damage
Legible marking
4.6 Rapid change of temperature θA = - 55 °C
θB = + 105 °C
5 cycles
Duration t = 30 min
4.7 Vibration Visual examination
Mounting:
See section “Mounting” of this specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s²
(whichever is less severe)
Total duration 6 h
No visible damage
Document Number: 26016 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 16-Jan-09 219
KP 1830
AC and Pulse Film Foil Capacitors
KP Radial Potted Type Vishay Roederstein
4.7.2 Final inspection Visual examination
Capacitance
No visible damage
|ΔC/C| ≤ 2 % of the value measured in 4.6.1
Tangent of loss angle As specified in section “Tangent of loss
angle” of this specification
4.9 Shock Mounting:
See section “Mounting” of this specification
Pulse shape: Half sine
Acceleration: 490 m/s²
Duration of pulse: 11 ms
4.9.3 Final measurements Visual examination No visible damage
Capacitance |ΔC/C| ≤ 2 % of the value measured in 4.6.1.
SUB-GROUP C1 COMBINED SAMPLE
OF SPECIMENS OF SUB-GROUPS
C1A AND C1B
4.10 Climatic sequence
4.10.2 Dry heat Temperature: + 100 °C
Duration: 16 h
4.10.3 Damp heat cyclic
Test Db, first cycle
4.10.4 Cold Temperature: - 55 °C
Duration: 2 h
4.10.6 Damp heat cyclic
Test Db, remaining cycles
Recovery 1 h to 2 h
4.10.6.2 Final measurements Voltage proof = URdc for 1 min within 15 min
after removal from testchamber
No breakdown of flash-over
Visual examination No visible damage
Legible marking
Capacitance |ΔC/C| ≤ 2 % of the value measured in
4.10.2
Tangent of loss angle As specified in section “Tangent of loss
angle” of this specification or ≤ 1.4 times the
value measured in 4.3.1 whichever is greater
Insulation resistance ≥ 50 % of values specified in section
“Insulation resistance” of this specification
SUB-GROUP C2
4.11 Damp heat steady state
4.11.1 Initial measurements Capacitance at 1 kHz
Tangent of loss angle at 1 kHz
Voltage proof = URdc for 1 min within 15 min
after removal from testchamber No breakdown of flash-over
4.11.3 Final measurements Visual examination No visible damage
Legible marking
Capacitance |ΔC/C| ≤ 1 % of the value measured in
4.11.1.
Tangent of loss angle As specified in section “Tangent of loss
angle” of this specification or ≤ 1.4 times the
value measured in 4.11.1whichever is
greater
Insulation resistance ≥ 50 % of values specified in section
“Insulation resistance” of this specification
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
KP 1830
Vishay Roederstein AC and Pulse Film Foil Capacitors
KP Radial Potted Type
www.vishay.com For technical questions, contact: dc-film@vishay.com Document Number: 26016
220 Revision: 16-Jan-09
SUB GROUP C3
4.12 Endurance Duration: 2000 h
1.5 x URdc at 85 °C
1.05 x URdc at 100 °C
4.12.1 Initial measurements Capacitance at 1 kHz
Tangent of loss angle at 100 kHz
4.12.5 Final measurements Visual examination No visible damage
Legible marking
Capacitance |ΔC/C| ≤ 2 % of the value measured in 4.12.1
Tangent of loss angle As specified in section “Tangent of loss
angle” of this specification or ≤ 1.4 times the
value measured in 4.12.1 whichever is
greater
Insulation resistance As specified in section “Insulation
resistance” of this specification
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
