MAPDCC0003-TR - M/A-COM Technology Solutions, Inc.

Low Cost Two-Way SMT Power Divider

1510-1660 MHz

Rev. V4

MAPDCC0003

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• Small Size and Low Profile

• Industry Standard SOIC-8 SMT Plastic Package

• Excellent Amplitude and Phase Balance

• Superior Repeatability

• Typical Insert ion Loss 0.4 dB

• Typical Isolation 20 dB

• 1 Watt Power Handling

• Frequency Coverage for GPS and LEO Pro-

grams

• Lead-Free SOIC-8 Package

• 100% Matte Tin Plating over Copper

• Halogen-Free “Green” Mold Compound

• 260°C Reflow Compatible

• RoHS* Compliant Version of DS52-0004

Description

M/A-COM’s MAPDCC0003 is an IC-based

monolithic power divider in a low cost SOIC-8

plastic package. This 2-way power divider is ideally

suited for applications where small size, low

insertion loss, superior phase/amplitude tracking

and low cost are required. Typical applications

include base station switching networks and other

communication applications where size and PCB

real estate are a premium. Available in tape and

reel.

The MAPDCC0003 is fabricated using a passive-

integrated circuit process. The process features

full-chip passivation for increased performance and

reliability.

Ordering Information

Part Number Package

MAPDCC0003 Bulk Packaging

MAPDCC0003-TR 1000 Piece Reel

MAPDCC0003-TB Sample Test Board

Note: Reference Application Note M513 for reel size

information.

Functional Diagram

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

Pin Configuration

Pin No. Function

1 GND

2 RF-IN

3 GND

4 GND

5 RF-1 (out)

6 GND

7 GND

8 RF-2 (out)

Low Cost Two-Way SMT Power Divider

1510-1660 MHz

Rev. V4

MAPDCC0003

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Electrical Specifications1: TA = +25°C

Parameter Units Min Typ Max

Insertion Loss Above 3.0dB dB — 0.4 0.6

Isolation dB 15 20 —

VSWR Input RL — — 1.3:1 1.5:1

VSWR Output RL — — 1.4:1 1.6:1

Amplitude Balance dB — 0.1 0.2

Phase Balance Deg — 1.0 3.0

Recommended PCB Configuration

Absolute Maximum Ratings 2,3

Parameter Absolute Maximum

Input Power4 1 W CW

Operating Temperature -40°C to +85°C

Storage Temperature -65°C to +150°C

2. Exceeding any one or combination of these limits may cause

permanent damage to this device.

3. M/A-COM does not recommend sustained operation near

these survivability limits.

4. With Internal load dissipation of 0.125 W maximum.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

GMIC Circuits are sensitive to electrostatic

discharge (ESD) and can be damaged by static

electricity. Proper ESD control techniques should

be used when handling these device s.

1. All specifications apply with a 50-Ohm source and load impedance.

Low Cost Two-Way SMT Power Divider

1510-1660 MHz

Rev. V4

MAPDCC0003

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Isolation vs. Frequency

VSWR vs. Frequency Phase Balance vs. Frequency

Typical Performance @ 25ºC

Insertion Loss vs. Frequen cy

VSWR vs. Frequency

1.00

1.25

1.50

1.75

2.00

1400 1450 1500 1550 1600 1650 1700

Frequency (MHz)

VSWR

RFIN RF1 RF2

Insertion Loss vs. Frequency

0.00

0.25

0.50

0.75

1.00

1400 1450 1500 1550 1600 1650 1700

Frequency (MHz)

Insertion Loss (dB)

RF1 RF2

I sol ation v s. Fr equenc y

1400 1450 1500 1550 1600 1650 1700

Frequency (MHz)

Isolation (dB)

RF1-RF2

P hase B alance vs. F req uency

0.00

0.05

0.10

0.15

0.20

1400 1450 1500 1550 1600 1650 1700

Frequency (MHz)

P hase Bal an ce

P hase In-B al ance

Low Cost Two-Way SMT Power Divider

1510-1660 MHz

Rev. V4

MAPDCC0003

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Lead-Free, SOIC-8†

† Reference Application Note M538 for lead-free solder reflow

recommendations.