LimitlessTM Wireless Global Limit Switches WGLA Series Datasheet LimitlessTM WGLA Series Wireless Global Limit Switch The LimitlessTM product line combines the best of MICRO SWITCHTM global limit switches with the latest commercial off-the-shelf wireless technology. Wireless enabled limit switches can be used for position sensing and presence/absence detection for a vast number of applications. The LimitlessTM Series is especially beneficial for remote monitoring applications where wiring or wire maintenance is not physically possible or economically feasible. Combining this greater flexibility with proven harsh duty packaging can result in increased efficiencies and improved protection for machines, equipment, OEMs, and operators. What makes our wireless solutions better? *Enables control and/or position notification in remote parts of machinery or manufacturing plants, where wiring is too costly or not possible Provides the ability to reconfigure and network multiple interfaces, or point-to-point with unique addresses which allows for adding, subtracting, or relocating LimitlessTM inputs with ease Lowers installation/maintenance costs by removing the need to wire LimitlessTM switches making conduit, strain relief, clips, connectors, and junction boxes unnecessary May decrease issues with wire connection integrity and cable degradation on moving equipment INDUSTRY STANDARD VALUE * RELIABLE 2 sensing.honeywell.com Features and Benefits WIRELESS DESIGN Radio (license-free and global): WPAN 802.15.4, 2.4 GHz, point-to-point to deliver reliable, flexible, and secure wireless transmission. Enables control and monitoring from remote locations where wiring is too costly or not practical (up to 305 m [1000 ft]). SEALED FOR HARSH ENVIRONMENTS The WGLA Series features IP67, NEMA 1, 4, 12, and 13 sealing. Sealed zinc die-cast and powder coated enclosure designed to meet the common dimensions and characteristics defined in EN50041 for easy installation and compatibility with other products in the field. Range of 305 m [1000 ft] REMOTE CONTROL AND MONITORING Enables users to monitor and/or control equipment, access points, and presence/ absence detection in remote locations where wiring is too costly or impractical to install. The WGLA Series consumes ultra-low power to prolong battery life and has direct or remote mounted antenna options. Consumes ultra-low power to prolong battery life DESIGN OPTIONS Actuator heads can be rotated in 90 increments to allow for flexibility in applications. Multiple actuators can also be applied to any side rotary WGLA LimitlessTM switch. CONFIGURABILITY Able to configure multiple WGLA options which easily allows for adding, removing, or relocating LimitlessTM WGLA switches. Helps to eliminate issues with wire connection integrity on moving equipment. MINIMIZES COSTS Minimizes installation/maintenance costs with no wires, conduit, strain relief, clips, connectors, or connection boxes to install or maintain. sensing.honeywell.com 3 Potential Applications with elements of control, notification, and/or setup * Valve position * Crane boom/jib/skew position * Lifts * Material handling * Presses * CNC equipment * Construction/Agricultural equipment * Movable machinery * Door position * Hose attachment verification * Remote or temporary equipment Table 1. Specifications Characteristic Parameter Series name WGLA Series Product type LimitlessTM Wireless Global Limit Switches Availability Operating force Actuator Lever type Housing material global, license-free bands see specification tables on page 6-7 side rotary, top plunger, top roller, top roller lever rotary lever included with side rotary - other lever options available powder coated zinc die-cast Housing type Radio EN 50041 WPAN 802.15.4; 2.4GHz point-to-point Antenna type direct or remote mount antenna options; omni directional Signal range* nominal 304 m* for International use (Europe and Australia due to signal restrictions); Nominal 1000 ft* for use in US and Canada Battery 3.6 Vdc Lithium Thionyl Chloride; 2/3 AA size (Est. life >1yr) Manufactured by Green Energy, part number ER14335M. Honeywell part number: WTB1 Sealing IP67; NEMA 1, 4, 12, 13 EMC Shock Vibration latest applicable standards: EN 300 328, V1.7.1; EN 61326-1 (2006) IEC 60068-2-27; half sine, 10 g, 6 mS, 3 axis IEC 60068-2-6; 10-500Hz with 0,35 mm peak-to-peak, 58 Hz to 500 Hz - 5g Operating temperature -40 C to 85 C [-40 F to 185 F] (side rotary) -25 C to 85 C [-13 F to 185 F] (all other housing styles) Agency approvals and standards FCC 15.247 Industry Canada RSS 210 ETSI, CE mark ACMA, C-Tick mark IDA, Singapore COFETEL, Mexico KCC, South Korea ANATEL, Brazil SRRC, China WPC, India UNSPSC code 20142601 UNSPSC commodity 20142601 Sealed Industrial *Actual range will vary depending upon antennas, cables, and site topography. ** "Clear line of sight" is not required to utilize the LimitlessTM technology and thus testing in the actual application will determine suitability. 4 sensing.honeywell.com LimitlessTM Wireless Global Limit Switches PRODUCT NOMENCLATURE WGLA 1 A 00 A A 1 A 3 Switch type Gen Code RF Code Antenna type code* Country use code Operating head code Lever code4 Roller code mm[in] Modification code WGLA Series Wireless Global Limit Switch 1 Version 1 A 2.4 GHz; IEEE 802.15.4 00 No antenna; RP-SMA connector jack 01 2.2 dBi omni w/switch mount; straight design 02 2.2 dBi omni w/switch mount; tilt/swivel 03 3.0 dBi omni w/remote adhesive mount 9.8 ft cable 04 5.5 dBi omni w/remote mag. mount, tilt/swivel, 5 ft cable 05 5.5 dBi omni w/remote mag. mount, tilt/swivel, 10 ft cable A US, Canada, Mexico B All other approved countries1, 2, 3 1 Use with antenna type codes 00 - 03, 05, 10, 11 only; usage also allowed in Country Code A. A Side rotary, momentary Not applicable Not applicable 3 Head assembled with actuator to right side B Top pin plunger 1 Standard fixed length A C Top roller plunger 2 Adjustable roller B 19 x 6,35 [0.75 x 0.25] steel 4 Head assembled with actuator to left side D Top roller lever 3 Yoke roller D 38,1 x 6,35 [1.5 x 0.25] nylon 5 Head assembled with actuator to mounting surface 4 Adjustable rod J 200 [7.87] aluminum adjustable rod 6 Roller perpendicular to mounting surface 5 Offset K 140 [5.51] aluminum adjustable rod N 318 [12.5] stainless steel adjustable rod T 19 x 8,76 [0.75 x 0.345] stainless steel Some countries require specific communication certifications. Contact Honeywell for existing certification information. 2 If LimitlessTM devices are used on machinery that may shipped globally, use country code "B". 3 Not applicable 19 x 6,35 [0.75 x 0.25] nylon 06 9.0 dBi omni w/remote mag. mount, tilt/swivel 5 ft cable Additional levers available 07 9.0 dBi omni w/remote mag. mount, tilt/swivel 10 ft cable 08 8.0 dBi omni w/remote bkt. mount, str. design 3 ft cable W 40,0 x 12,7 [1.5 x 0.5] rubber 09 8.0 dBi omni w/remote bkt. mount, str. design 11 ft cable Y 50,9 x 12,7 [2.0 x 0.5] rubber 10 2.2 dBi omni w/remote mag. mount, tilt/swivel 10 ft cable 11 0 dBi omni w/ switch mount; straight design 4 * See Table 3 for additional information. sensing.honeywell.com 5 WGLA Series Table 2. LimitlessTM WGLA Series Order Guide Part Number* Antenna Type Action Actuator/Lever WGLA1A01AA1A 2.2 dBi omni straight side rotary - momentary 19 mm x 6,35 mm [0.75 in x 0.25 in], nylon roller WGLA1A01AA1B 2.2 dBi omni straight side rotary - momentary 19 mm x 6,35 mm [0.75 in x 0.25 in], steel roller WGLA1A01AA4J 2.2 dBi omni straight side rotary - momentary 200 mm aluminum adjustable rod WGLA1A01AB 2.2 dBi omni straight top pin plunger - WGLA1A01AC 2.2 dBi omni straight top roller plunger - WGLA1A01AD 2.2 dBi omni straight top roller lever - WGLA1A02AA1A 2.2 dBi omni tilt & swivel side rotary - momentary 19 mm x 6,35 mm [0.75 in x 0.25 in], nylon roller WGLA1A02AA1B 2.2 dBi omni tilt & swivel side rotary - momentary 19 mm x 6,35 mm [0.75 in x 0.25 in], steel roller WGLA1A02AA4J 2.2 dBi omni tilt & swivel side rotary - momentary 200 mm aluminum adjustable rod WGLA1A02AB 2.2 dBi omni tilt & swivel top pin plunger - WGLA1A02AC 2.2 dBi omni tilt & swivel top roller plunger - WGLA1A02AD 2.2 dBi omni tilt & swivel top roller lever - WGLA1A04AA1A 5.5 dBi omni w/ remote magnetic mount, tilt & swivel, 5 ft cable side rotary - momentary 19 mm x 6,35 mm [0.75 in x 0.25 in], nylon roller WGLA1A04AA1B 5.5 dBi omni w/ remote magnetic mount, tilt & swivel, 5 ft cable side rotary - momentary 19 mm x 6,35 mm [0.75 in x 0.25 in], steel roller WGLA1A04AA4J 5.5 dBi omni w/ remote magnetic mount, tilt & swivel, 5 ft cable side rotary - momentary 200 mm aluminum adjustable rod WGLA1A04AB 5.5 dBi omni w/ remote magnetic mount, tilt & swivel, 5 ft cable top pin plunger - WGLA1A04AC 5.5 dBi omni w/ remote magnetic mount, tilt & swivel, 5 ft cable top roller plunger - WGLA1A04AD 5.5 dBi omni w/ remote magnetic mount, tilt & swivel, 5 ft cable top roller lever - WGLA1A11AA1A 0.0 dBi omni, straight side rotary - momentary 19 mm x 6,35 mm [0.75 in x 0.25 in], nylon roller WGLA1A11AA1B 0.0 dBi omni, straight side rotary - momentary 19 mm x 6,35 mm [0.75 in x 0.25 in], steel roller WGLA1A11AA4J 0.0 dBi omni, straight side rotary - momentary 200 mm aluminum adjustable rod WGLA1A11AB 0.0 dBi omni, straight top pin plunger - WGLA1A11AC 0.0 dBi omni, straight top roller plunger - * To order products approved for use outside of the US/Canada/Mexico (A code), simply substitute the appropriate letter after reviewing the product approvals and antenna guidelines contained in this document. B = All other approved countries 6 sensing.honeywell.com LimitlessTM Wireless Global Limit Switches Operating Force, Refer to Figure(s) Pretravel Overtravel Differential Travel Operating Point Free Position 1 26 +10/-5 75 12 67,0 mm 2,0 mm [2.64 in 0.08 in] - 1 26 +10/-5 75 12 67,0 mm 2,0 mm[2.64 in 0.08 in] - 1 26 +10/-5 75 12 26 +10/-5 - 2 2,5 mm [0.10 in] 7,0 mm [0.28 in] 0,9 mm [0.035 in] 35,0 mm 1,5 mm [1.38 in 0.06 in] 37,5 mm [1.48 in] 2, 3 2,5 mm [0.10 in] 7,0 mm [0.28 in] 0,9 mm [0.035 in] 48,0 mm 1,5 mm [1.89 in 0.06 in] (linear actuation) 58,0 mm 2,0 mm [2.28 in 0.08 in] (cam actuation) 50,5 mm [2.00 in] 4, 5 4,2 mm [0.165 in] 9,0 mm [0.35 in] 3,0 mm [0.012 in] 61,0 mm 1,5 mm [2.40 in 0.06 in] (pin actuation) 67,0 mm 2,0 mm [2.64 in 0.08 in] (cam actuation) 65,2 mm [2.57 in] 1 26 +10/-5 75 12 67,0 mm 2,0 mm [2.64 in 0.08 in] - 1 26 +10/-5 75 12 67,0 mm 2,0 mm [2.64 in 0.08 in] - 1 26 +10/-5 75 12 26 +10/-5 - 2 2,5 mm [0.10 in] 7,0 mm [0.28 in] 0,9 mm [0.035 in] 35,0 mm 1,5 mm [1.38 in 0.06 in] 37,5 mm [1.48 in] 2, 3 2,5 mm [0.10 in] 7,0 mm [0.28 in] 0,9 mm [0.035 in] 48,0 mm 1,5 mm [1.89 in 0.06 in] (linear actuation) 58,0 mm 2,0 mm [2.28 in 0.08 in] (cam actuation) 50,5 mm [2.00 in] 4, 5 4,2 mm [0.165 in] 9,0 mm [0.35 in] 3,0 mm [0.012 in] 61,0 mm 1,5 mm [2.40 in 0.06 in] (pin actuation) 67,0 mm 2,0 mm [2.64 in 0.08 in] (cam actuation) 65,2 mm [2.57 in] 1 26 +10/-5 75 12 67,0 mm 2,0 mm [2.64 in 0.08 in] - 1 26 +10/-5 75 12 67,0 mm 2,0 mm [2.64 in 0.08 in] - 1 26 +10/-5 75 12 26 +10/-5 - 2 2,5 mm [0.10 in] 7,0 mm [0.28 in] 0,9 mm [0.035 in] 35,0 mm 1,5 mm 1.38 in 0.06 in] 37,5 mm [1.48 in] 2, 3 2,5 mm [0.10 in] 7,0 mm [0.28 in] 0,9 mm [0.035 in] 48,0 mm 1,5 mm [1.89 in 0.06 in] (linear actuation) 58,0 mm 2,0 mm [2.28 in 0.08 in] (cam actuation) 50,5 mm [2.00 in] 4, 5 4,2 mm [0.165 in] 9,0 mm [0.35 in] 3,0 mm [0.012 in] 61,0 mm 1,5 mm [2.40 in 0.06 in] (pin actuation) 67,0 mm 2,0 mm [2.64 in 0.08 in] (cam actuation) 65,2 mm [2.57 in] 1 26 +10/-5 75 12 67,0 mm 2,0 mm [2.64 in 0.08 in] - 1 26 +10/-5 75 12 67,0 mm 2,0 mm [2.64 in 0.08 in] - 1 26 +10/-5 75 12 26 +10/-5 - 2 2,5 mm [0.10 in] 7,0 mm [0.28 in] 0,9 mm [0.035 in] 35,0 mm 1,5 mm [1.38 in 0.06 in] 37,5 mm [1.48 in] 2, 3 2,5 mm [0.10 in] 7,0 mm [0.28 in] 0,9 mm [0.035 in] 48,0 mm 1,5 mm [1.89 in 0.06 in] (linear actuation) 58,0 mm 2,0 mm [2.28 in 0.08 in] (cam actuation) 50,5 mm [2.00 in] sensing.honeywell.com 7 WGLA Series OPERATING FORCE DIAGRAMS Figure 1. LimitlessTM WGLA Series Side Rotary Heads * Cam and Angular Actuation 20,2 mm [0.79 in] O 19,1 mm [O 0.75 in] Differential travel (12) O 19,1 mm [O 0.75 in] 20,0 mm [0.79 in] Differential travel (10 ) 30 4J type: 200 mm [7.87 in]max. 4K type: 140 mm [5.51 in] max. aluminum rod 30 54 52 mm [2.05 in] 75 min. full travel 67,0 mm 2,0 mm [2.64 in 0.08 in] operate point 30 >52,0 mm [>2.05 in] LimitlessTM WGLA side rotary heads, cam actuation (no rod lever) Maximum operating force: 9,7 N [2.2 lb] Maximum disconnect force: 11,4 N [2.6 lb] Maximum operating velocity: 85 m/s [33.5 in/s] Minimum operating velocity: 8,5 mm/s [0.33 in/s] Maximum operating frequency: 120 ops/minute 38,1 mm to 91,5 mm [1.5 in to 3.6 in] adjustment O 9,05 mm [O 0.36 in] O 12,4 mm [O 0.488 in] 35,0 mm 1,5 mm [1.38 in 0.06 in] 30,5 mm [1.2 in] full travel operate point LimitlessTM WGLA plunger heads, linear actuation Maximum operating force: 16 N [3.6 lb] Maximum disconnect force: 27 N [6.0 lb] Maximum operating velocity: 0,1 m/s [3.9 in/s] Minimum operating velocity: 1,0 mm/s [0.04 in/s] Maximum operating frequency: 120 ops/minute 8 sensing.honeywell.com 75 min. full travel LimitlessTM WGLA side rotary heads, angular actuation Maximum operating torque/force: 0,33 Nm [2.9 in-lb] Maximum disconnect torque: 0,385 Nm [3.4 in-lb] Maximum operating degrees: 1290 Minimum operating degrees: 13 Maximum operating frequency: 120 ops/minute Figure 2. LimitlessTM WGLA Series Plunger Heads * Linear Actuation Differential travel (0,9 mm [0.035 in] 26, +10/-5 operate point Differential travel (0,9 mm [0.035 in] 43,5 mm [1.71 in] 48,0 mm 1,5 mm full travel [1.89 in 0.06 in] operate point LimitlessTM Wireless Global Limit Switches OPERATING FORCE DIAGRAMS Figure 3. LimitlessTM WGLA Series Top Roller Plunger Head * Cam Actuation 15,0 mm [0.59 in] 20,0 mm [0.79 in] Differential travel (1,8 mm [0.07 in]) Differential travel (3,0 mm [0.19 in]) O 18,7 mm [O 0.74 in] 30 65,17 mm [2.57 in] 61,0 mm 1,5 mm [2.40 in 0.06 in] operate point O 12,4 mm [O 0.488 in] 58,0 mm 2,0 mm [2.28 in 0.08 in] operate point 44,0 mm [1.73 in] Figure 4. LimitlessTM WGLA Series Top Roller lever Head * Pin Actuation LimitlessTM WGLA top roller plunger head, cam actuation Maximum operating force: 9,3 N [2.1 lb] Maximum disconnect force: 15,6 N [3.5 lb] Maximum operating velocity: 0,17 m/s [6.7 in/s] Minimum operating velocity: 1,7 mm/s [0.067 in/s] Maximum operating frequency: 120 ops/minute 52,0 mm [2.05 in] full travel LimitlessTM WGLA top roller lever head, pin actuation Maximum operating force: 9,5 N [2.1 lb] Maximum disconnect force: 12 N [2.7 lb] Maximum operating velocity: 0,17 m/s [6.7 in/s] Minimum operating velocity: 1,7 mm/s [0.067 in/s] Maximum operating frequency: 120 ops/minute Figure 5. LimitlessTM WGLA Series Top Lever Head * Cam Actuation Differential travel (4,1 mm [0.16 in]) 20 mm [0.79 in] 20 mm [0.79 in] 30 O 18,7 mm [O 0.74 in] 52 mm [2.05 in] 67,0 mm 2,0 mm [2.64 in 0.08 in] operate point LimitlessTM WGLA top roller lever head, cam actuation Maximum operating force: 5,5 N [1.2 lb] Maximum disconnect force: 7,0 N [1.6 lb] Maximum operating velocity: 0,29 m/s [11.4 in/s] Minimum operating velocity: 2,9 mm/s [0.11 in/s] Maximum operating frequency: 120 ops/minute sensing.honeywell.com 9 WGLA Series PRODUCT DIMENSIONS Figure 6. LimitlessTM WGLA Series Side Rotary/1.5 in lever Figure 7. LimitlessTM WGLA Series Side Rotary/adjust. lever Y OX Z Y Z OX 70 mm max. [2.76 in max.] 31,1 mm to 91,5 mm [1.22 in to 3.60 in] adjustable 62,1 mm [2.44 in] 20 mm [0.79 in] 102,9 mm [4.05 in] 60 mm [2.36 in] 75,9 mm [2.99 in] 5,3 mm [0.21 in] 82 mm [3.23 in] 7,3 mm [0.29 in] O5,3 mm [O0.21 in] 25 mm [0.98 in] 30 mm [1.18 in] 28 mm [1.10 in] 10 mm [0.39 in] 16 mm [0.63 in] 42 mm [1.65 in] 31,5 mm [1.24 in] 125 mm [4.92 in] 42 mm [1.65 in] Figure 6. Specification Table (refer to Figure 6 above) Figure 7. Specification Table (refer to Figure 7 above) Lever Roller Material X Dim. Y Dim. Z Dim. Lever Roller Material X Dim. Y Dim. Z Dim. GLZ51A Nylon 19,1 mm [0.75 in] 55,9 mm [2.20 in] 6,4 mm [0.25 in] GLZ52A Nylon 19,1 mm [0.75 in] 65,9 mm [2.59 in] 6,4 mm [0.25 in] GLZ51B Steel 19,1 mm [0.75 in] 55,9 mm [2.20 in] 6,4 mm [0.25 in] GLZ52B Steel 19,1 mm [0.75 in] 65,9 mm [2.59 in] 6,4 mm [0.25 in] GLZ51T Stainless steel 19,1 mm [0.75 in] 56,8 mm [2.24 in] 8,8 mm [0.35 in] GLZ52D Nylon 38,1 mm [1.5 in] 65,9 mm [2.59 in] 6,4 mm [0.25 in] GLZ51Y Rubber 50 mm [1.97 in] 66,1 mm [2.60 in] 10,0 mm [0.39 in] GLZ52E Nylon 19,1 mm [0.75 in] 79,4 mm [3.13 in] 33,1 mm [1.30 in] GLZ52W Rubber 40 mm [1.57 in] 71,5 mm [2.81 in] 12,7 mm [0.50 in] GLZ52Y Rubber 50 mm [1.97 in] 68,8 mm [2.71 in] 10,0 mm [0.39 in] 10 sensing.honeywell.com LimitlessTM Wireless Global Limit Switches Figure 8. LimitlessTM WGLA Series Side Rotary/Adjustable Rod Lever 3,2 mm 6,6 mm [0.26 in] GLZ54J: 200 mm [7.87 in] max. GLZ54K: 140 mm [5.51 in] max. Figure 9. LimitlessTMWGLA Series Top Plunger [0.13 in] GLZ54J: 201.5 mm [7.93 in] GLZ54K: 141 mm [5.55 in] aluminum rod 60,9 mm [2.4 in] 36,8 mm [1.45 in] 44,8 mm [1.76 in] 16,0 mm 1,5 mm [0.63 in 0.06 in] 37,5 mm [1.48 in] free position sensing.honeywell.com 11 WGLA Series Figure 10. LimitlessTM WGLA Series Top Roller Plunger Figure 11. LimitlessTM WGLA Series Top Roller Arm 16,0 mm 1,5 mm [0.63 in 0.06 in] 16,0 mm 1,5 mm [0.63 in 0.06 in] 13,0 mm [0.51 in] 7,9 mm [0.31 in] 14 mm [0.55 in] Steel roller 4,7 mm [0.19 in] O12,4 mm [O0.49 in] 12 50,5 mm [2.00 in] free position sensing.honeywell.com O18,7 mm [0.74 in] 35 mm [1.38 in] 65,2 mm [2.57 in] free position LimitlessTM Wireless Global Limit Switches Table 3. Antenna Listings/Order Code Specifications Antennas can be ordered with the LimitlessTM Wireless switches by inserting the Antenna Type Code into the part number as shown in the nomenclature. Also, switches can be ordered without antennas, by using the "00" Antenna Type Code in the part number. Antennas may also be ordered separately using the Part Numbers below. Part Number (if ordered separately) Antenna Type Code (if ordered with a wireless switch) Antenna Design Antenna Gain (dBi) Connector/ Mounting Dimensions WAN01RSP 01 straight 2.2 RP-SMA plug/direct mount O 9,91 mm x 112,78 mm L [O 0.39 in x 4.44 in L] WAN02RSP 02 tilt/swivel 2.2 RP-SMA plug/direct mount O 9,91 mm x 112,78 mm L [O 0.39 in x 4.44 in L] flat 3.0 RP-SMA plug/adhesive mount O 7,87 mm x 22,1 mm W x 4,57 mm D [O 0.31 in x 0.87 in W x 0.18 in D] 3 m [9 ft] cable WAN03RSP 03 WAN04RSP* 04** with a WAMM100RSP-005 base with 1,52 m [5 ft] of cable 05** with a WAMM100RSP-010 base with 3,05 m [10 ft] of cable tilt/swivel 5.5 RP-SMA plug/direct mount O 12,7 mm x 208,28 mm L [O 0.50 in x 8.20 in L] WAN05RSP* 06** with a WAMM100RSP-005 base with 1,52 m [5 ft] of cable 07** with a WAMM100RSP-010 base with 3,05 m [10 ft] of cable tilt/swivel 9.0 RP-SMA plug/direct mount O 12,7 mm x 384,05 mm L [O 0.50 in x 15.12 in L] WAN06RNJ* 08** with a WCA200RNPRSP-002 coax cable assembly 0,682 m [2 ft] 09** with a WCA200RNPRSP-010 coax cable assembly 3,05 m [10 ft] straight 8.0 RP-N jack/ bracket O 33,5 mm x 427,9 mm L [O 1.32 in x 16.85 in L] WAN07RSP 11 straight 0.0 RP-SMA plug/direct mount O 8,0 mm x 30 mm L [O 0.32 in x 1.18 in L] WAN09RSP - low profile mobile 3.0 RP-SMA plug/magnetic O 76,2 mm x 115 mm L [O 3.0 in x 4.54 in L] 4,57 m [15 ft] cable WAN10RSP - straight 5.0 RP-SMA plug/magnetic O 76,2 mm x 230,1 mm L [O 3.0 in x 9.06 in L] 1,52 m [5 ft] cable WAN11RSP* - low profile mobile dome 4.0 RP-SMA plug/thruhole screw O 39 mm x 42,4 mm L [O 1.54 in x 1.67 in L ] * Not allowed for use with Country Code "B" LimitlessTM products ** See Tables 4 and 5 for accessory descriptions sensing.honeywell.com 13 WGLA Series ACCESSORIES Table 4. Cable and Coax Accessories Listing Description WCA200RNPRSP-002 LimitlessTM Series wireless cable assembly wth 200 Series cable, 2 ft length, reverse polarity N plug to reverse polarity SMA plug, use only with WAN06RNJ antenna WCA200RNPRSP-010 LimitlessTM Series wireless cable assembly wth 200 Series cable, 10 ft length, reverse polarity N plug to reverse polarity SMA plug, use only with WAN06RNJ antenna WCA200RNJRSP-002 LimitlessTM Series wireless cable assembly wth 200 Series cable, 2 ft length, reverse polarity SMA jack to reverse polarity SMA plug WCA200RNJRSP-005 LimitlessTM Series wireless cable assembly wth 200 Series cable, 5 ft length, reverse polarity SMA jack to reverse polarity SMA plug WCA200RNJRSP-010 LimitlessTM Series wireless cable assembly wth 200 Series cable, 10 ft length, reverse polarity SMA jack to reverse polarity SMA plug WCA200RNJRSP-015 LimitlessTM Series wireless cable assembly wth 200 Series cable, 15 ft length, reverse polarity SMA jack to reverse polarity SMA plug WCA200RNJRSP-020 LimitlessTM Series wireless cable assembly wth 200 Series cable, 20 ft length, reverse polarity SMA jack to reverse polarity SMA plug Table 5. Base Accessories Listing 14 sensing.honeywell.com Description WAMM100RSP -005 Magnetic antenna base with 5 ft [1.52 m] of cable with reverse polarity SMA plug WAMM100RSP-010 Magnetic antenna base with 10 ft [3.05 m] of cable with reverse polarity SMA plug WPB1 WPMM wireless panel-mount reciever mounting bracket WPR1 WPMM wireless panel-mount receiver retainer LimitlessTM Wireless Global Limit Switches LIMITLESSTM ACCESSORIES: WGLA SERIES LEVERS GLZ51A fixed rotary lever, nylon roller, front GLZ51B fixed rotary lever, steel roller, front GLZ55A fixed rotary offset lever, nylon roller, front GLZ55B fixed rotary offset lever, steel roller, front GLZ52C/D adj. lever, nylon & steel roller, front GLZ54J adjustable rod, 200 mm aluminum GLZ53A yoke lever, nylon rollers, front placement GLZ53B yoke lever, steel rollers, front placement GLZ52A adj. lever, nylon roller, back GLZ52B adj. lever, steel roller, back GLZ54K adjustable rod, 140 mm aluminum GLZ54N adjustable rod, 318 mm stainless steel sensing.honeywell.com 15 WGLA Series This Honeywell datasheet supports the following LimitlessTM WGLA Series Listings For use in US, Canada, and Mexico WGLA1A00AA WGLA1A00AA4J WGLA1A00AB WGLA1A00AC WGLA1A00AD WGLA1A01AA1A WGLA1A01AA1B WGLA1A01AA4J WGLA1A01AB WGLA1A01AC WGLA1A01AD WGLA1A02AA1A WGLA1A02AA1B WGLA1A02AA1T WGLA1A02AA2B WGLA1A02AA3B WGLA1A02AA4J WGLA1A02AB WGLA1A02AC WGLA1A02AD WGLA1A04AA1A WGLA1A04AA1B WGLA1A04AA4J WGLA1A04AB WGLA1A04AC WGLA1A06AA4N WGLA1A11AA1A WGLA1A11AA1B WGLA1A11AA4J WGLA1A11AB WGLA1A11AC For use in all other approved countries WGLA1A00BA WGLA1A00BA1B WGLA1A00BA2B WGLA1A00BA4J WGLA1A00BB WGLA1A00BC WGLA1A00BD WGLA1A01BA1A WGLA1A01BA1B WGLA1A01BA4J WGLA1A01BA4N WGLA1A01BB WGLA1A01BC WGLA1A01BD WGLA1A02BA1A WGLA1A02BA1B WGLA1A02BA2B WGLA1A02BA4J WGLA1A02BB WGLA1A02BC WGLA1A02BD WGLA1A04BA1A WGLA1A04BA1B WGLA1A04BA4J WGLA1A04BB WGLA1A04BC WGLA1A11BA1A WGLA1A11BA1B WGLA1A11BA2B WGLA1A11BB WGLA1A11BC ADDITIONAL INFORMATION The following associated literature is available on the Honeywell web site at sensing.honeywell.com: * Product installation instructions * Product range guide * Product brochure * White Paper: LimitlessTM Switches Offer Unlimited Benefits WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION * * The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. 16 sensing.honeywell.com Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell's sensing and control products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.com Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 honeywell.com 002317-4-EN IL50 GLO October 2014 Copyright (c) 2014 Honeywell International Inc. All rights reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Honeywell: WGLA1A06AA4N WGLA1A02AA2B WGLA1A00BA4J WGLA1A11BA1B WGLA1A11BB WGLA1A11BC WGLA1A00AA4J WGLA1A00BA WGLA1A11BA2B