REV. Status REVISION 01/14/02 MP REVISION A ADDED COUNTRY OF ORIGIN. 03/21/02 MP REVISION B CHANGED A.3 05/28/02 MP ADSL Inductor A. Electrical Specifications (@ 25C) 1. Primary Open Circuit Inductance; 4.0mH +5% @ 10KHz, 0.1Vrms, Measured (15) and (610) DC Resistance; (15)=4.59 MAX (610)=4.50 MAX Turns Ratio; (15):(610)=1:1.0041% Dielectric Strength; 630Vrms 1 second @ Wdg. to Wdg. Operating Temperature Range; 40C to +85C 100mA DC MODEL NUMBER > |TTC4110| Country of origin White dot indicates pin 1 B. Marking; TTC4110, TAMURA, country of origin and date code C. Schematic and Mounting Footprint; 19.00+0.25[0.748+0.010] 1 . 7010 2.500.25[0.098+0.010] t- | = 1.30+0.10[0.051+0.004] = = = = 2.50+0.25[0.051+0.010] -_ -_ 5 6 EE 10.00+0.25[0.394+0.010] D. Mechanical Specifications; | 14,00[0.550]MAX Suggested Pad Layout ~ 14,00[0.550]MAX 12.70[0. 500]MAX 1 gb Hh 0.40[0.016]TYP J. Coleman 4b T 0.70[0.028]TYP 7 17.80[0.699 ]MAX F | | S 6 | 5 =s| _ rT 7 ~SO2.5 00.098] TYP 4 ot _ 14.00[0.550]MAX 3 = [Fo 8 2 | = 9 PREPARED BY: 1 oto En 10 D. Rund ENGINEER: DWG CONTROL NO.| REV ADSL PA112980 M. Pitchai ACAD\TTC\A1 129801.DWG B INDUCTOR TTC 41 10 QUALITY CONTROL: CONTENTS OF THIS DRAWING ARE TAMURA CORPORATION OF AMERICA MODEL SPECIFICATION D. Kelley PRIOR NOTICE Toone POSES RT TE AescOIao oe | DIM: mm(in} SCL: 3/1 [SH 1 OF 1 APPROVED: PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY [TEMS TO WHICH TAMURA RETAINS THE EXCLUSIVE RIGHT OF DISSEMINATION, REPRODUCTION, MANUFACTURE AND SALE. THIS DRAWING, PRINT OR DOCUMENT IS SUBMITTED IN CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING.