PESD5V0X1BCAL,315 - NEXPERIA

PESD5V0X1BCAL

Extremely low capacitance bidirectional ESD protection

diode

6 June 2018 Product data sheet

1. General description

Extremely low capacitance bidirectional ElectroStatic Discharge (ESD) protection diode in a

leadless ultra small SOD882 Surface-Mounted Device (SMD) plastic package designed to

protect one signal line from the damage caused by ESD and other transients. The combination of

extremely low capacitance, high ESD maximum rating and ultra small package makes the device

ideal for high-speed data line protection.

2. Features and benefits

•Bidirectional ESD protection of one line

•Extremely low capacitance: Cd = 0.85 pF

•Low clamping voltage: VCL = 17 V

•Ultra low leakage current: IRM = 1 nA

•ESD protection up to 15 kV

•IEC 61000-4-2; level 4 (ESD)

•AEC-Q101 qualified

3. Applications

•Computers and peripherals

•Audio and video equipment

•10/100/1000 Mbit/s Ethernet

•Communication systems

•Portable electronics

•SIM card protection

•USB, High-Definition Multimedia Interface (HDMI), FireWire

4. Quick reference data

Table 1. Quick reference data

Symbol Parameter Conditions Min Typ Max Unit

VRWM reverse standoff

voltage

Tamb = 25 °C - - 5.5 V

Cddiode capacitance f = 1 MHz; VR = 0 V; Tamb = 25 °C - 0.85 0.95 pF

Nexperia PESD5V0X1BCAL

Extremely low capacitance bidirectional ESD protection diode

5. Pinning information

Table 2. Pinning information

Pin Symbol Description Simplified outline Graphic symbol

1 K1 cathode (diode 1)

2 K2 cathode (diode 2) 21

Transparent

top view

DFN1006-2 (SOD882)

sym045

K2K1

6. Ordering information

Table 3. Ordering information

PackageType number

Name Description Version

PESD5V0X1BCAL DFN1006-2 plastic, leadless ultra small package; 2 terminals; 0.65 mm pitch;

1 mm x 0.6 mm x 0.48 mm body

SOD882

7. Marking

Table 4. Marking codes

Type number Marking code

PESD5V0X1BCAL NN

Product data sheet 6 June 2018 2 / 11

Nexperia PESD5V0X1BCAL

Extremely low capacitance bidirectional ESD protection diode

8. Limiting values

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

IPPM rated peak pulse current tp = 8/20 µs [1] - 1.8 A

Tjjunction temperature - 150 °C

Tamb ambient temperature -55 150 °C

Tstg storage temperature -65 150 °C

ESD maximum ratings

IEC 61000-4-2; air discharge [2] - 15 kV

IEC 61000-4-2; contact discharge [2] - 15 kV

machine model - 400 V

VESD electrostatic discharge

voltage

MIL-STD-883 (human body model) - 10 kV

[1] Device stressed with ten non-repetitive current pulses (8/20 µs exponential decay waveform according to IEC 61000-4-5 and

IEC 61643-321)

[2] Device stressed with ten non-repetitive ESD pulses.

t (µs)

0 403010 20

001aaa630

120

IPP

(%)

e-t

100 % IPP; 8 µs

50 % IPP; 20 µs

Fig. 1. 8/20 µs pulse waveform according to

IEC 61000-4-5

001aaa631

IPP

100 %

90 %

30 ns

60 ns

10 %

tr = 0.6 ns to 1 ns

Fig. 2. ESD pulse waveform according to

IEC 61000-4-2

Product data sheet 6 June 2018 3 / 11

Nexperia PESD5V0X1BCAL

Extremely low capacitance bidirectional ESD protection diode

9. Characteristics

Table 6. Characteristics

Symbol Parameter Conditions Min Typ Max Unit

VRWM reverse standoff

voltage

Tamb = 25 °C - - 5.5 V

VBR breakdown voltage IR = 10 mA; Tamb = 25 °C 8.1 9.8 12.3 V

IRM reverse leakage

current

VRWM = 5.5 V; Tamb = 25 °C - 1 10 nA

Cddiode capacitance f = 1 MHz; VR = 0 V; Tamb = 25 °C - 0.85 0.95 pF

VCL clamping voltage IPPM = 1.8 A; Tamb = 25 °C [1] - - 17 V

Rdyn dynamic resistance IR = 10 A; Tamb = 25 °C [2] - 0.5 - Ω

[1] Device stressed with 8/20 μs exponential decay waveform according to IEC 61000-4-5 and IEC 61643-321.

[2] Non-repetitive current pulse, Transmission Line Pulse (TLP) tp = 100 ns; square pulse; ANSI / ESD STM5.5.1-2008.

VR (V)

0 542 31

006aac886

0.7

0.8

0.6

0.9

1.0

(pF)

0.5

f = 1 MHz; Tamb = 25 °C

Fig. 3. Diode capacitance as a function of reverse

voltage; typical values

006aab325

-VCL -VBR -VRWM

VCL

VBR

VRWM

-IRM

IRM

-IR

-IPP

IPP

IPPM

-IPPM

Fig. 4. V-I characteristics for a bidirectional ESD

protection diode

Product data sheet 6 June 2018 4 / 11

Nexperia PESD5V0X1BCAL

Extremely low capacitance bidirectional ESD protection diode

50 Ω

DUT

(DEVICE

UNDER

TEST)

GND

450 Ω

RG 223/U

50 Ω coax

ESD TESTER

IEC 61000-4-2 network

Cs = 150 pF; Rd = 330 Ω

4 GHz DIGITAL

OSCILLOSCOPE

10x

ATTENUATOR

unclamped +8 kV ESD pulse waveform

(IEC 61000-4-2 network)

unclamped -8 kV ESD pulse waveform

(IEC 61000-4-2 network)

GND

clamped +8 kV ESD pulse waveform

(IEC 61000-4-2 network)

006aac887

GND

clamped -8 kV ESD pulse waveform

(IEC 61000-4-2 network)

vertical scale = 20 V/div

horizontal scale = 10 ns/div

vertical scale = 20 V/div

horizontal scale = 10 ns/div

vertical scale = 2 kV/div

horizontal scale = 10 ns/div

vertical scale = 2 kV/div

horizontal scale = 10 ns/div

Fig. 5. ESD clamping test setup and waveforms

Product data sheet 6 June 2018 5 / 11

Nexperia PESD5V0X1BCAL

Extremely low capacitance bidirectional ESD protection diode

10. Application information

The device is designed for the protection of one bidirectional data or signal line from surge pulses

and ESD damage. The device is suitable on lines where the signal polarities are both, positive and

negative with respect to ground.

aaa-002737

ESD protection diode

GND

line to be protected

Fig. 6. Application diagram

Circuit board layout and protection device placement

Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge

transients. The following guidelines are recommended:

1. Place the device as close to the input terminal or connector as possible.

2. Minimize the path length between the device and the protected line.

3. Keep parallel signal paths to a minimum.

4. Avoid running protected conductors in parallel with unprotected conductors.

5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and ground loops.

6. Minimize the length of the transient return path to ground.

7. Avoid using shared transient return paths to a common ground point.

8. Use ground planes whenever possible. For multilayer PCBs, use ground vias.

11. Test information

Quality information

This product has been qualified in accordance with the Automotive Electronics Council (AEC)

standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in

automotive applications.

Product data sheet 6 June 2018 6 / 11

Nexperia PESD5V0X1BCAL

Extremely low capacitance bidirectional ESD protection diode

12. Package outline

03-04-17Dimensions in mm

0.55

0.47

0.65

0.62

0.55

0.50

0.46

cathode marking on top side (if applicable)

1.02

0.95

0.30

0.22

0.30

0.22

Fig. 7. Package outline DFN1006-2 (SOD882)

13. Soldering

solder lands

solder resist

occupied area

solder paste

sod882_fr

0.9

0.3

(2×)

R0.05 (8×)

0.6

(2×)

0.7

(2×)

0.4

(2×)

1.3

0.5

(2×)

0.8

(2×)

0.7

Dimensions in mm

Fig. 8. Reflow soldering footprint for DFN1006-2 (SOD882)

Product data sheet 6 June 2018 7 / 11

Nexperia PESD5V0X1BCAL

Extremely low capacitance bidirectional ESD protection diode

14. Revision history

Table 7. Revision history

Data sheet ID Release date Data sheet status Change notice Supersedes

PESD5V0X1BCAL v.2 20180606 Product data sheet - PESD5V0X1BCAL v.1

Modifications: •The format of this data sheet has been redesigned to comply with the identity guidelines of

Nexperia.

•Legal texts have been adapted to the new company name where appropriate.

•Removed section "Packing information"

PESD5V0X1BCAL v.1 20120201 Product data sheet - -

Product data sheet 6 June 2018 8 / 11

Nexperia PESD5V0X1BCAL

Extremely low capacitance bidirectional ESD protection diode

15. Legal information

Data sheet status

Document status

[1][2]

Product

status [3]

Definition

Objective [short]

data sheet

Development This document contains data from

the objective specification for

product development.

Preliminary [short]

data sheet

Qualification This document contains data from

the preliminary specification.

Product [short]

data sheet

Production This document contains the product

specification.

[1] Please consult the most recently issued document before initiating or

completing a design.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case of

multiple devices. The latest product status information is available on

the internet at https://www.nexperia.com.

Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the relevant

full data sheet, which is available on request via the local Nexperia sales

office. In case of any inconsistency or conflict with the short data sheet, the

full data sheet shall prevail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be

valid in which the Nexperia product is deemed to offer functions and qualities

beyond those described in the Product data sheet.

Disclaimers

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy

or completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no responsibility

for the content in this document if provided by an information source outside

of Nexperia.

In no event shall Nexperia be liable for any indirect, incidental, punitive,

special or consequential damages (including - without limitation - lost

profits, lost savings, business interruption, costs related to the removal

or replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Nexperia’s aggregate and cumulative liability towards customer

for the products described herein shall be limited in accordance with the

Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right to make changes

to information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Suitability for use — Nexperia products are not designed, authorized or

warranted to be suitable for use in life support, life-critical or safety-critical

systems or equipment, nor in applications where failure or malfunction

of an Nexperia product can reasonably be expected to result in personal

injury, death or severe property or environmental damage. Nexperia and its

suppliers accept no liability for inclusion and/or use of Nexperia products in

such equipment or applications and therefore such inclusion and/or use is at

the customer’s own risk.

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no representation

or warranty that such applications will be suitable for the specified use

without further testing or modification.

Customers are responsible for the design and operation of their applications

and products using Nexperia products, and Nexperia accepts no liability for

any assistance with applications or customer product design. It is customer’s

sole responsibility to determine whether the Nexperia product is suitable

and fit for the customer’s applications and products planned, as well as

for the planned application and use of customer’s third party customer(s).

Customers should provide appropriate design and operating safeguards to

minimize the risks associated with their applications and products.

Nexperia does not accept any liability related to any default, damage, costs

or problem which is based on any weakness or default in the customer’s

applications or products, or the application or use by customer’s third party

customer(s). Customer is responsible for doing all necessary testing for the

customer’s applications and products using Nexperia products in order to

avoid a default of the applications and the products or of the application or

use by customer’s third party customer(s). Nexperia does not accept any

liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — Nexperia products are

sold subject to the general terms and conditions of commercial sale, as

published at http://www.nexperia.com/profile/terms, unless otherwise agreed

in a valid written individual agreement. In case an individual agreement is

concluded only the terms and conditions of the respective agreement shall

apply. Nexperia hereby expressly objects to applying the customer’s general

terms and conditions with regard to the purchase of Nexperia products by

customer.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Non-automotive qualified products — Unless this data sheet expressly

states that this specific Nexperia product is automotive qualified, the

product is not suitable for automotive use. It is neither qualified nor tested in

accordance with automotive testing or application requirements. Nexperia

accepts no liability for inclusion and/or use of non-automotive qualified

products in automotive equipment or applications.

In the event that customer uses the product for design-in and use in

automotive applications to automotive specifications and standards,

customer (a) shall use the product without Nexperia’s warranty of the

product for such automotive applications, use and specifications, and (b)

whenever customer uses the product for automotive applications beyond

Nexperia’s specifications such use shall be solely at customer’s own risk,

and (c) customer fully indemnifies Nexperia for any liability, damages or failed

product claims resulting from customer design and use of the product for

automotive applications beyond Nexperia’s standard warranty and Nexperia’s

product specifications.

Product data sheet 6 June 2018 9 / 11

Nexperia PESD5V0X1BCAL

Extremely low capacitance bidirectional ESD protection diode

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

Trademarks

Notice: All referenced brands, product names, service names and

trademarks are the property of their respective owners.

Product data sheet 6 June 2018 10 / 11

Nexperia PESD5V0X1BCAL

Extremely low capacitance bidirectional ESD protection diode

Contents

1. General description......................................................1

2. Features and benefits.................................................. 1

3. Applications.................................................................. 1

4. Quick reference data....................................................1

5. Pinning information......................................................2

6. Ordering information....................................................2

7. Marking.......................................................................... 2

8. Limiting values............................................................. 3

9. Characteristics.............................................................. 4

10. Application information............................................. 6

11. Test information..........................................................6

12. Package outline.......................................................... 7

13. Soldering..................................................................... 7

14. Revision history..........................................................8

15. Legal information.........................................................9

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release: 6 June 2018

Product data sheet 6 June 2018 11 / 11