SPEC NO: DSAD2464 REV NO: V.5 DATE: NOV/29/2005 PAGE: 1 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000634
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
P/N: TC23-11YWA YELLOW
Description
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
Package Dimensions & Internal Circuit Diagram
58mm (2.3 INCH) 8x8 DOT MATRIX DISPLAY
Features
•2.3 INCH MATRIX HEIGHT.
•DOT SIZE 5mm.
•LOW CURRENT OPERATION.
•HIGH CONTRAST AND LIGHT OUTPUT.
•COMPATIBLE WITH ASCII AND EBCDIC CODES.
•STACKABLE HORIZONTALLY.
•COLUMN CATHODE AND COLUMN ANODE AVAILABLE.
•EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
•MULTICOLOR AVAILABLE.
•MECHANICALLY RUGGED.
•STANDARD : GRAY FACE, WHITE DOT.
•RoHS COMPLIANT.
SPEC NO: DSAD2464 REV NO: V.5 DATE: NOV/29/2005 PAGE: 2 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000634
Selection Guide
Part No. Dice Lens Type Iv (ucd)
@ 10mA
Min. Typ.
TC23-11YWA YELLOW (GaAsP/GaP) WHITE DIFFUSED 1900 8000 Column Cathode
Description
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Parameter Yellow Units
Power dissipation 105 mW
DC Forward Current 30 mA
Peak Forward Current [1] 140 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 5 Seconds
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Yellow 590 nm IF=20mA
λDDominant Wavelength Yellow 588 nm IF=20mA
∆λ1/2 Spectral Line Half-width Yellow 35 nm IF=20mA
C Capacitance Yellow 20 pF VF=0V;f=1MHz
VFForward Voltage Yellow 2.1 2.5 V IF=20mA
IRReverse Current Yellow 10 uA VR = 5V
SPEC NO: DSAD2464 REV NO: V.5 DATE: NOV/29/2005 PAGE: 3 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000634
Yellow TC23-11YWA
SPEC NO: DSAD2464 REV NO: V.5 DATE: NOV/29/2005 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000634
PACKING & LABEL SPECIFICATIONS TC23-11YWA
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity/ Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.