ARA200A4HZ - Panasonic - Product.Network

Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/

RA (ARA)

ASCTB102E 201202-T

ORDERING INFORMATION

TYPES

1. Tube packing

Standard packing: 40 pcs. in an inner package (tube); 1,000 pcs. in an outer package

1.0GHz 2 Form C RELAY

RA RELAYS (ARA)

Contact

arrangement Nominal coil voltage Part No.

Single side stable 1 coil latching 2 coil latching

2 Form C

1.5V DC ARA200A1H ARA210A1H ARA220A1H

3 V DC ARA200A03 ARA210A03 ARA220A03

4.5V DC ARA200A4H ARA210A4H ARA220A4H

5 V DC ARA200A05 ARA210A05 ARA220A05

6 V DC ARA200A06 ARA210A06 ARA220A06

9 V DC ARA200A09 ARA210A09 ARA220A09

12 V DC ARA200A12 ARA210A12 ARA220A12

24 V DC ARA200A24 ARA210A24 ARA220A24

48 V DC ARA200A48 — —

RoHS compliant

FEATURES

1. High frequency characteristics

(Impedance 50Ω, ~1.0GHz)

• Insertion loss; Max. 0.3dB

• Isolation; Min. 20dB

(Between open contacts)

Min. 30dB

(Between contact sets)

• V.S.W.R.; Max. 1.2

2. Surface mount terminal

This relay is a surface-mounted model

with excellent high-frequency properties.

In addition, it can use a microstrip line in

the base circuit design which spares the

labor of machining the base.

3. Low proﬁle small type

9.7(W)×14.7(L)×5.9(H) mm

.382(W)×.579(L)×.232(H) inch

4. High sensitivity: 140 mW nominal

operating power (Single side stable,

2 coil latching)

5. High contact reliability

Electrical life: Min. 107 (10mA 10V DC)

TYPICAL APPLICATIONS

• Measurement instruments

Oscilloscope attenuator circuit

• All types of communication device

If you wish to use in applications with low

level loads or with high frequency

switching, please consult us.

Contact arrangement

2: 2 Form C

RA relays

ARA 2 0 A

Operating function

0: Single side stable

1: 1 coil latching

2: 2 coil latching

Type of operation

0: Standard type (B.B.M)

Coil voltage, V DC

1H: 1.5, 03: 3, 4H: 4.5, 05: 5, 06: 6, 09: 9, 12: 12, 24: 24, 48: 48

(H=0.5)

Terminal shape

A: Surface-mount terminal

Packing style

Nil:

Tube packing

Tape and reel packing (picked from 1 pin side)

Tape and reel packing (picked from 10 pin side)

Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/

RA (ARA)

ASCTB102E 201202-T

2. Tape and reel packing

Standard packing: 500 pcs. in an inner package (tape and reele); 1,000 pcs. in an outer package

Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1-pin side) is also available.

RATING

1. Coil data

1) Single side stable

2) 1 coil latching

3) 2 coil latching

*Pulse drive (JIS C5442-1996)

Contact

arrangement Nominal coil voltage Part No.

Single side stable 1 coil latching 2 coil latching

2 Form C

1.5V DC ARA200A1HZ ARA210A1HZ ARA220A1HZ

3 V DC ARA200A03Z ARA210A03Z ARA220A03Z

4.5V DC ARA200A4HZ ARA210A4HZ ARA220A4HZ

5 V DC ARA200A05Z ARA210A05Z ARA220A05Z

6 V DC ARA200A06Z ARA210A06Z ARA220A06Z

9 V DC ARA200A09Z ARA210A09Z ARA220A09Z

12 V DC ARA200A12Z ARA210A12Z ARA220A12Z

24 V DC ARA200A24Z ARA210A24Z ARA220A24Z

48 V DC ARA200A48Z — —

Nominal coil

voltage

Pick-up voltage

(at 20°C 68°F)

Drop-out voltage

(at 20°C 68°F)

Nominal operating

current

[±10%] (at 20°C 68°F)

Coil resistance

[±10%] (at 20°C 68°F)

Nominal operating

power

Max. applied voltage

(at 20°C 68°F)

1.5V DC

75%V or less of

nominal voltage*

(Initial)

10%V or more of

nominal voltage*

(Initial)

93.8mA 16 Ω

140mW 150%V of nominal voltage

3 V DC 46.7mA 64.3Ω

4.5V DC 31 mA 145 Ω

5 V DC 28.1mA 178 Ω

6 V DC 23.3mA 257 Ω

9 V DC 15.5mA 579 Ω

12 V DC 11.7mA 1,028 Ω

24 V DC 8.3mA 2,880 Ω200mW

48 V DC 6.3mA 7,680 Ω300mW 120%V of nominal voltage

Nominal coil

voltage

Set voltage

(at 20°C 68°F)

Reset voltage

(at 20°C 68°F)

Nominal operating

current

[±10%] (at 20°C 68°F)

Coil resistance

[±10%] (at 20°C 68°F)

Nominal operating

power

Max. applied voltage

(at 20°C 68°F)

1.5V DC

75%V or less of

nominal voltage*

(Initial)

75%V or less of

nominal voltage*

(Initial)

46.9mA 32 Ω

70mW 150%V of nominal voltage

3 V DC 23.3mA 128.6Ω

4.5V DC 15.6mA 289.3Ω

5 V DC 14 mA 357 Ω

6 V DC 11.7mA 514 Ω

9 V DC 7.8mA 1,157 Ω

12 V DC 5.8mA 2,057 Ω

24 V DC 4.2mA 5,760 Ω100mW

Nominal coil

voltage

Set voltage

(at 20°C 68°F)

Reset voltage

(at 20°C 68°F)

Nominal operating

current

[±10%] (at 20°C 68°F)

Coil resistance

[±10%] (at 20°C 68°F)

Nominal operating

power

Max. applied voltage

(at 20°C 68°F)

1.5V DC

75%V or less of

nominal voltage*

(Initial)

75%V or less of

nominal voltage*

(Initial)

93.8mA 16 Ω

140mW 150%V of nominal voltage

3 V DC 46.7mA 64.3Ω

4.5V DC 31 mA 145 Ω

5 V DC 28.1mA 178 Ω

6 V DC 23.3mA 257 Ω

9 V DC 15.5mA 579 Ω

12 V DC 11.7mA 1,028 Ω

24 V DC 8.3mA 2,880 Ω200mW

Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/

RA (ARA)

ASCTB102E 201202-T

2. Speciﬁcations

Note: * The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to [6] AMBIENT ENVIRONMENT

in GENERAL APPLICATION GUIDELINES.

REFERENCE DATA

Characteristics Item Speciﬁcations

Contact

Arrangement 2 Form C

Contact material Stationary: AgPd + Au clad, Movable: AgPd

Initial contact resistance, max. Max. 75mΩ (By voltage drop 6V DC 1A)

Rating

Contact rating 10mA 10V DC (resistive load), 1A 30V DC (resistive load)

Contact carrying power 3W (at 1GHz, impedance 50Ω, V.S.W.R. max.1.2)

Max. switching voltage 30V DC

Max. switching current 1A

Nominal

operating

power

Single side stable 140mW (1.5 to 12V), 200mW (24V), 300mW (48V)

1 coil latching 70 mW (1.5 to 12V), 100mW (24V)

2 coil latching 140mW (1.5 to 12V), 200mW (24V)

High frequency

characteristics

(Initial) (~1GHz,

Impedance 50Ω)

Isolation Between open contacts Min. 20dB

Between contact sets Min. 30dB

Insertion loss (without D.U.T. board’s loss) Max. 0.3dB

V. S.W.R. Max. 1.2

Input power 3W (at 1GHz, impedance 50Ω, V.S.W.R. max.1.2)

Electrical

characteristics

Insulation resistance (Initial) Min. 100MΩ (at 500V DC)

Measurement at same location as “Initial breakdown voltage” section.

Breakdown

voltage

(Initial)

Between open contacts 750 Vrms for 1min. (Detection current: 10mA)

Between contact sets 1,000 Vrms for 1min. (Detection current: 10mA)

Between contact and coil 1,000 Vrms for 1min. (Detection current: 10mA)

Between contact and earth terminal 1,000 Vrms for 1min. (Detection current: 10mA)

Temperature rise (at 20°C) Max. 60°C

(By resistive method, nominal voltage applied to the coil, 1GHz, 3W, V.S.W.R. max.1.2)

Operate time [Set time] (at 20°C) Max. 4ms (Approx. 2ms) [Max. 4ms (Approx. 2ms)] (Nominal operating voltage applied to

the coil, excluding contact bounce time.)

Release time [Reset time] (at 20°C) Max. 4ms (Approx. 1ms) [Max. 4ms (Approx. 2ms)] (Nominal operating voltage applied to

the coil, excluding contact bounce time.) (without diode)

Mechanical

characteristics

Shock

resistance

Functional Min. 500 m/s2 (Half-wave pulse of sine wave: 11ms; detection time: 10µs.)

Destructive Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6ms.)

Vibration

resistance

Functional 10 to 55 Hz at double amplitude of 3mm (Detection time: 10µs.)

Destructive 10 to 55 Hz at double amplitude of 5mm

Expected life

Mechanical Min. 108 (at 180 cpm)

Electrical Min. 107 (at 20 cpm) (10mA 10V DC resistive load)

Min. 105 (at 20 cpm) (1A 30V DC resistive load)

Conditions Conditions for operation, transport and storage* Ambient temperature: –40°C to +85°C –40°F to +185°F

Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)

Unit weight Approx. 2 g .07 oz

1-(1). High frequency characteristics (Impedance 50Ω)

Sample: ARA200A12

Measuring method: Measured with HP network analyzer (HP8753C).

• V.S.W.R. • Insertion loss • Isolation

1.1

1.0

1.5

1.4

1.2

1.3

300kHz 0.5GHz 1.0GHz

COM-NO

COM-NC

Frequency

V.S.W.R.

0.8

1.0

0.2

0.6

0.4

0.3

300kHz 0.5GHz 1.0GHz

COM-NC

COM-NO

Insertion loss, dB

Frequency

100

300kHz 0.5GHz 1.0GHz

COM-NC

COM-NO

CONTACT sets

Isolation, dB

Frequency

Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/

RA (ARA)

ASCTB102E 201202-T

DIMENSIONS (mm inch)

Note: Please consult us regarding recommended PC board patterns.

1-(2). High frequency characteristics (Impedance 75Ω)

Sample: ARA200A12

Measuring method: Measured with HP network analyzer (HP8753C).

• V.S.W.R. • Insertion loss • Isolation

COM-NC

COM-NO

1.0

Frequency

1.2

1.4

1.1

1.3

1.5

300kHz 0.5GHz 1.0GHz

V.S.W.R.

1.0

Frequency

0.6

0.2

0.8

0.4

300kHz 0.5GHz 1.0GHz

Insertion loss, dB

100

300kHz 0.5GHz 1.0GHz

COM-NC

COM-NO

CONTACT sets

Isolation, dB

Frequency

The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/

Tolerance: ±0.3 ±.012

A (S = 20:1)

Coplanarity of

terminals & ribs

Max. 0.20 .008

9.70

0.25

12.90

14.30

Soldering with

PC board earth

(4 ribs)

14.70

2.54

0.50

5.90

7.62

11.5±0.5

.382

.010

.508

.563

.579

.100

.020

.232

.300

.453±.020

Schematic (Top view)

Single side stable 1 coil latching 2 coil latching

(Deenergized condition) (Reset condition) (Reset condition)

12345

678910

Direction indication

12345

678910

2345

6789

CAD Data

Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/

RA (ARA)

ASCTB102E 201202-T

NOTES

1. Coil operating power

Pure DC current should be applied to the

coil. The wave form should be

rectangular. If it includes ripple, the ripple

factor should be less than 5%.

However, check it with the actual circuit

since the characteristics may be slightly

different. The nominal operating voltage

should be applied to the coil for more

than 10 ms to set/reset the latching type

relay.

2. Coil connection

When connecting coils, refer to the wiring

diagram to prevent mis-operation or

malfunction.

3. External magnetic ﬁeld

Since RA relays are highly sensitive

polarized relays, their characteristics will

be affected by a strong external magnetic

ﬁeld. Avoid using the relay under that

condition.

4. Cleaning

For automatic cleaning, the boiling

method is recommended. Avoid

ultrasonic cleaning which subjects the

relays to high frequency vibrations, which

may cause the contacts to stick.

It is recommended that alcoholic solvents

be used.

5. Tape and reel packing

1) Tape dimensions

2) X type, Z type

3) Dimensions of plastic reel

6. Soldering

Manual soldering shall be performed

under following condition.

Tip temperature: 280°C to 300°C 536°F

to 572°F.

Wattage: 30 to 60W

Soldering time: within 5s

In case of automatic soldering, the

following conditions should be observed

1) Position of measuring temperature

2) IR (infrared reﬂow) soldering method

Temperature rise of relay itself may vary

according to the mounting level or the

heating method of reﬂow equipment.

Therefore, please set the temperature of

soldering portion of relay terminal and

the top surface of the relay case not to

exceed the above mentioned soldering

condition.

It is recommended to check the

temperature rise of each portion under

actual mounting condition before use.

The soldering earth shall be performed

by manual soldering.

7. Conditions for operation, transport

and storage conditions

1) Ambient temperature, humidity, and

atmospheric pressure during usage,

transport, and storage of the relay:

(1) Temperature:

–40 to +70°C –40 to +158°F

(2) Humidity: 5 to 85% RH

(Avoid freezing and condensation.)

The humidity range varies with the

temperature. Use within the range

indicated in the graph below.

(3) Atmospheric pressure: 86 to 106 kPa

Temperature and humidity range for

usage, transport, and storage:

2) Condensation

Condensation forms when there is a

sudden change in temperature under

high temperature and high humidity

conditions. Condensation will cause

deterioration of the relay insulation.

3) Freezing

Condensation or other moisture may

freeze on the relay when the temperature

is lower than 0°C 32°F. This causes

problems such as sticking of movable

parts or operational time lags.

4) Low temperature, low humidity

environments

The plastic becomes brittle if the relay is

exposed to a low temperature, low

humidity environment for long periods of

time.

Max. 5°

12.30

.484

16.0

.630

2.0

.079 4.0

.157

11.5

.453

0.4

.016

15.2

.598 6.4±0.2

.252±.008

24.00

.945

RA relay (10.75)

(.423)

1.75

.069

1.5+0.1

.059

dia.

+.004

(General tolerance: ±0.1 ±.004)

Tape coming out direction

Relay polarity bar

X: Picked from 1 pin

Z: Picked from 10 pin

24.4+2.0

.961+.079

2.0±0.2

.079±.008

13±0.2 dia.

.512±.008 dia.

.827±.031 dia.

21±0.8 dia.

80±1 dia.

3.150±.039 dia.

330±2 dia.

12.992±.079 dia.

.079±.020

2.0±0.5

Surface of PC board where relay is mounted.

t1t2

T1 = 150 to 180°C

T2 = 230°C

T3 = Within 250°C

302 to 356°F

446°Fand higher

482°F

t1 = 60 to 120 sec.

t2 = Within 30 sec.

For general cautions for use, please

refer to the “General Application

Guidelines”.

Humidity, %R.H.

Tolerance range

070–40 +32 +158–40

(Avoid

condensation

when used at

temperatures

higher than

0°C

(Avoid freezing

when used at

temperatures

lower than

0°C32°F)

Te mperature, °C°F

32°F)