F-219 (Rev 07JUN19) CLP-115-02-L-D CLP-107-02-F-D-P 10 YEAR MFG WITH 30 " GOLD EXTENDED LIFE PRODUCT CLP-130-02-L-D CLP-116-02-F-DH HIGH MATING CYCLES (1.27 mm) .050" CLP SERIES LOW-PROFILE DUAL WIPE SOCKET High-reliability Tiger ClawTM contacts Mates with: FTSH, FTS, FW SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?CLP Insulator Material: Black Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Sn or Au over 50 " (1.27 m) Ni Current Rating (CLP/FTSH): 3.4 A per pin (2 pins powered) Voltage Rating: 280 VAC/395 VDC Operating Temp Range: -55 C to +125 C Insertion Depth: Top Entry = (1.40 mm) .055" minimum, Bottom Entry = (2.41 mm) .095" minimum plus board thickness DH Entry = (2.31 mm) .091" to (2.67 mm) .105" Normal Force: 60 grams (0.59 N) average Max Cycles: 100 with 10 " (0.25 m) Au RoHS Compliant: Yes (1.27 mm x 1.27 mm) .050" x .050" micro pitch APPLICATIONS CLP Low-profile (2.21 mm) .087" FTSH HORIZONTAL Surface mount Suitable for pass-through applications PASS-THRU CLP NO. PINS PER ROW 1 PLATING OPTION 02 ROW OPTION OTHER OPTION PROCESSING Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max (02-35) (0.15 mm) .006" max (36-50)* *(.004" stencil solution may be available; contact IPG@samtec.com) -F = Gold flash on contact, Matte Tin on tail 02 thru 50 For complete scope of recognitions see www.samtec.com/quality -G No. of Positions x (1.27) .050 + (0.43) .017 FILE NO. E111594 100 (1.27) .050 ALSO AVAILABLE 02 01 (MOQ Required) * Single row * Other platings (1.27) .050 -P = Pick & Place Pad (5 positions min. -D only) (Not always necessary for auto placement. See Flex Processing.) (2.54) .100 (2.29) .090 -D A 320 -K = (4.00 mm) .157" DIA Polyimide film Pick & Place Pad (5 positions min.) -P OPTION (3.43) .135 -DH Note: Some sizes, styles and options are non-standard, non-returnable. = Alignment Pin (Not available with -PA option) (05, 06, 07, 08, 10, 12, 15, 20, 25, 30, 40 positions only) (-DH option and other sizes. Contact Samtec.) (6.35) .250 x (3.18) .125 (4.32) .170 99 -A = Double Horizontal (Requires FTSH-04 lead style) = 10 " (0.25 m) Gold (-D only) (0.41) .016 (4.57) (3.05) .180 .120 = Bottom Entry (Required for bottom entry applications) -DH -L = 10 " (0.25 m) Gold on contact, Matte Tin on tail RECOGNITIONS - BE -D = Double Row PIN/ROW A 04-15 (3.56) .140 16-50 (7.11) .280 If odd pins/row, alignment pins are on middle position on centerline of the part. If even pins/row, then alignment pins are between middle two positions. (1.40) .055 - PA (8.25) .325 (3.07) .121 (0.89) .035 DIA (7.00) .275 -PA OPTION = Pick & Place Pad with Alignment Pin (-D only) (Not Available with -A option) Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. - TR = Tape & Reel