MASW-007107-000SMB - M/A-Com Technology Solutions

GaAs Broadband SPDT Switch

DC - 8.0 GHz

Rev. V7

MASW-007107

MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

DC-0008121

Features

 802.11a + b/g and MIMO Applications

 Test and Measurement and Low/Medium Power

Telecommunication Applications up to 8.0 GHz

 Broadband Performance: DC - 8.0 GHz

 Low Insertion Loss: 0.5 dB from 2.0 - 6.0 GHz

 High Isolation: 30 dB from 2.0 - 6.0 GHz

 Fast Settling for Low Gate Lag Requirements

 Lead-Free 2 mm 8-Lead PDFN Package

 100% Matte Tin Plating over Copper

 Halogen-Free “Green” Mold Compound

 RoHS Compliant* and 260°C Reflow Compatible

Description

The MASW-007107 is a broadband GaAs pHEMT

MMIC SPDT switch in a lead-free 2 mm 8-lead

PDFN package. Typical applications are for WLAN

IEEE 802.11a + b/g, and MIMO. Other applications

include test equipment requiring ultra fast switching

speeds. Designed for low insertion loss, this SPDT

switch maintains low loss up to 8.0 GHz.

The MASW-007107 is fabricated using a 0.5 micron

gate length GaAs pHEMT process. The process

features full passivation for performance and

reliability.

Pin No. Pin Name Description

1 RF1 RF Output 1

2 N/C No Connection

3 N/C No Connection

4 RF2 RF Output 2

5 VC2 Voltage Control 2

6 N/C No Connection

7 RFC RF Common

8 VC1 Voltage Control 1

9 Paddle5 RF and DC Ground

Pin Configuration 4

Ordering Information1,2

Part Number Package

MASW-007107-TR3000 3000 piece reel

MASW-007107-000SMB Sample Test Board

MASW-007107-000DIE3 Separated die on grip ring

MASW-007107-0GPDIE 100 piece gel pack

4. MACOM recommends connecting unused package pins to

ground.

5. The exposed pad centered on the package bottom must be

connected to RF, DC and thermal ground.

Functional Schematic

* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.

1. Reference Application Note M513 for reel size information.

2. All sample boards include 5 loose parts.

3. Die quantity varies.

N/CN/C

RF1

RF2

N/C

VC2

VC1

RFC

GaAs Broadband SPDT Switch

DC - 8.0 GHz

Rev. V7

MASW-007107

MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

DC-0008121

6. For positive voltage control, external DC blocking capacitors are required on all RF ports.

7. Electrical minimum and maximum specifications are guaranteed in final package assembly only.

8. Insertion loss can be optimized by varying the DC blocking capacitor value.

Parameter Test Conditions Units Min. Typ. Max.

Insertion Loss8 2.0 - 6.0 GHz

6.0 - 8.0 GHz dB — 0.50

0.75

0.8

—

Isolation

2.4 GHz

5.3 GHz

5.8 GHz

6.0 - 8.0 GHz

—

Return Loss DC - 8.0 GHz dB — 16 —

Input IP2

Two Tone, 5 dBm / Tone, 5 MHz Spacing

2.4 GHz

5.3 GHz

5.8 GHz

dBm

—

Two Tone, 5 dBm / Tone, 10 MHz Spacing

2.4 GHz (3 V)

5.8 GHz (3 V)

2.4 GHz (5 V)

5.8 GHz (5 V)

dBm

—

Input IP3

Two Tone, 15 dBm / Tone, 10 MHz Spacing

2.4 GHz (3 V)

5.8 GHz (3 V)

2.4 GHz (5 V)

5.8 GHz (5 V)

dBm

—

Input P0.1dB

2.4 GHz

5.3 GHz

5.8 GHz

dBm —

—

Input P1dB

2.4 GHz

5.3 GHz

5.8 GHz

dBm —

30.5

29.5

27.0

—

Linear Pout

2.4 GHz, OFDM, QAM-64,54 Mbps, EVM = 2.5%

3 V

5 V

8 V

dBm

—

21.0

27.5

30.0

—

2nd Harmonic

2.4 GHz, PIN = 20 dBm

5.3 GHz, PIN = 20 dBm

5.8 GHz, PIN = 20 dBm

dBc —

-80

-71

—

3rd Harmonic

2.4 GHz, PIN = 20 dBm

5.3 GHz, PIN = 20 dBm

5.8 GHz, PIN = 20 dBm

dBc —

-83

-71

-72

—

TRISE, TFALL 10% to 90% RF and 90% to 10% RF ns — 13 —

TON, TOFF 50% control to 90% RF and 50% control to 10% RF ns — 35 —

Transients — mV — 14 —

Control Current |VC| = 3 V µA — 1 5

RON t > 90 ms after OFF to ON Switching (settled) Ω — 2.50 —

Gate Lag |ΔRon| between 15 µs and 90 ms after OFF to ON Switching Ω — 0.15 —

Electrical Specifications: TA = +25°C, VC = 0 V / 3 V, Z0 = 50 Ω, 8 pF Capacitor6,7

GaAs Broadband SPDT Switch

DC - 8.0 GHz

Rev. V7

MASW-007107

MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

DC-0008121

Qualification

Qualified to MACOM specification REL-201,

Process Flow -2.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

These electronic devices are sensitive to

electrostatic discharge (ESD) and can be damaged

by static electricity. Proper ESD control techniques

should be used when handling these devices.

Truth Table11

Control VC1 Control VC2 RFC– RF1 RFC—RF2

1 0 On Off

0 1 Off On

11. 1 = +2.9 V to +5 V, 0 = 0 V + 0.2 V.

Application Schematic

C1, C2, C3 = 8 pF

N/C

GND

RF1

RF2

GND

VC1

VC2

RFC

Absolute Maximum Ratings9,10

9. Exceeding any one or combination of these limits may cause

permanent damage to this device.

10. MACOM does not recommend sustained operation near

these survivability limits.

Parameter Absolute Maximum

Input Power @ 3 V Control 32 dBm

Input Power @ 5 V Control 34 dBm

Operating Voltage 8.5 volts

Operating Temperature -40°C to +85°C

Storage Temperature -65°C to +150°C

GaAs Broadband SPDT Switch

DC - 8.0 GHz

Rev. V7

MASW-007107

MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

DC-0008121

Typical Performance Curves

Isolation vs. Frequency

Insertion Loss vs. Frequency

Return Loss vs. Frequency

EVM vs. Pout @ 2.4 GHz

-30

-25

-20

-15

-10

-5

0 2 4 6 8 10

+25°C

-40°C

+85°C

Frequency (GHz)

0 2 4 6 8 10

+25°C

-40°C

+85°C

Frequency (GHz)

0.0

0.5

1.0

1.5

2.0

0 2 4 6 8 10

+25°C

-40°C

+85°C

Frequency (GHz)

0 5 10 15 20 25 30 35

EVM @ 3 V

EVM @ 5 V

EVM @ 8 V

Pout (dBm)

GaAs Broadband SPDT Switch

DC - 8.0 GHz

Rev. V7

MASW-007107

MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

DC-0008121

Lead Free 2 mm 8-lead PDFN †

† Reference Application Note S2083 for lead-free solder reflow recommendations.

Meets JEDEC moisture sensitivity level 1 requirements.

Die Outline Drawing12,13,14,15

12. Typical dimensions in inches (millimeters)

13. Die thickness is 0.008” (0.203 mm)

14. Typical bond pad is 0.003” square (0.076 mm square)

15. Bond pad metallization is gold.

0.0191

(0.486)

0.018

(0.4585)

0.0110

(0.2795)

0.022

(0.560)

0.004

(0.1005)

0.036

(0.0925)

0.0189

(0.480)

0.0158

(0.4025)

0.0155

(0.395)

0.0109

(0.2775)

0.0181

(0.461)

Die Size - Inches (mm)

0.022 x 0.0189 x 0.008 (0.56 x 0.48 x 0.203)

Die Bond Pad Configuration

Pad No. Name Description

1 VC1 Voltage Control 1

2 RF1 RF Output 1

3 GND Ground

4 GND Ground

5 RF2 RF Output 2

6 VC2 Voltage Control 2

7 RFC RF Common

GaAs Broadband SPDT Switch

DC - 8.0 GHz

Rev. V7

MASW-007107

MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

DC-0008121

Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM")

products. These materials are provided by MACOM as a service to its customers and may be used for

informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or

in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM

assumes no responsibility for errors or omissions in these materials. MACOM may make changes to

specifications and product descriptions at any time, without notice. MACOM makes no commitment to update

the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future

changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,

to any intellectual property rights is granted by this document.

THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR

INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR

OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY

OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN

THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,

WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.

MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM

customers using or selling MACOM products for use in such applications do so at their own risk and agree to

fully indemnify MACOM for any damages resulting from such improper use or sale.