DATA SHEET Form 0773-180418 PAGE 1 SNAP DIGITAL INPUT MODULES Features > > > > > > > Four channels per module 4,000-volt transient isolation Convenient pluggable wiring terminals Channel-specific LEDs UL and CE approved Accepts 22 to 14 AWG wire Factory Mutual approved (part numbers ending in FM) DESCRIPTION This data sheet covers SNAP digital input modules with four channels. For modules with 16 or 32 channels, see form 1556, the SNAP High-Density Digital Modules Data Sheet. Opto 22 SNAP I/O 4-channel digital input modules are part of the SNAP PAC System. Optical isolation on these modules provides 4,000 volts of transient (4000 V for 1 ms) protection for sensitive control electronics from industrial field signals. Digital input modules can sense either AC or DC signals. All SNAP 4-channel digital modules have removable top-mounted connectors to provide easy access for field wiring, and all operate on 5 VDC control logic. Each digital module features integral channel-specific LEDs for convenient troubleshooting and maintenance. Each module is factory tested twice and is UL and CE approved. In addition, part numbers ending in FM are Factory Mutual approved. SNAP Digital Input Modules Part Numbers Part Description SNAP-IAC5 SNAP 4-channel 90-140 VAC input, 5 VDC logic SNAP-IAC5A SNAP 4-channel 180-280 VAC input, 5 VDC logic SNAP-IAC5MA SNAP 4-channel isolated 90-140 VAC/VDC input, 5 VDC logic, with manual/auto switches SNAP-IAC5FM SNAP 4-channel 90-140 VAC/VDC input, 5 VDC logic, Factory Mutual approved SNAP-IAC5AFM SNAP 4-channel 180-280 VAC input, 5 VDC logic, Factory Mutual approved SNAP-IDC5 SNAP 4-channel 10-32 VDC input, 5 VDC logic SNAP-IDC5D SNAP 4-channel 2.5-28 VDC input, 5 VDC logic SNAP-IDC5-FAST SNAP 4-channel high-speed 2.5-16 VDC input, 5 VDC logic SNAP-IDC5-FAST-A SNAP 4-channel high-speed 18-32 VDC input, 5 VDC logic SNAP-IDC5G SNAP 4-channel 35-75 VAC/DC input, 5 VDC logic SNAP-IDC5-HT SNAP 4-channel 15-32 VDC leakage-tolerant input, 5 VDC logic SNAP-IDC5MA SNAP 4-channel isolated 10-32 VAC/VDC input, 5 VDC logic, with manual/auto switches The SNAP-IDC5-SW and SNAP-IDC5-SW-NC modules supply power to an external dry contact switch and sense switch closure (SNAP-IDC5-SW) or opening (SNAP-IDC5-SW-NC). SNAP-IDC5-SW SNAP 4-channel switch status input, normally open SNAP-IDC5-SW-NC SNAP 4-channel switch status input, normally closed SNAP-IAC5MA and SNAP-IDC5MA feature manual-on/manual-off/ automatic switches, ideal for testing control applications. The switches override input from field devices, so you can determine whether a problem lies in the application or in the device. SNAP-IDC5FM SNAP 4-channel 10-32 VDC input, 5 VDC logic, Factory Mutual approved SNAP-IDC5DFM SNAP 4-channel 2.5-28 VDC input, 5 VDC logic SNAP-RETN4 SNAP 4-module retention rail (OEM) SNAP input modules are used to sense the on or off status for AC or DC voltages from such sources as proximity switches, push buttons, or auxiliary contacts. The SNAP-IDC5G is ideal for detecting 48 VDC in telecom applications. The SNAP-IDC5-HT is designed for sensors that have a high leakage current. SNAP racks use a retention rail locking system. Use two 4-40 by 1/2-inch standard machine screws to hold each module in position on the SNAP rack. SNAP-RETN4B SNAP 4-module retention rail, 25-pack (OEM) SNAP-RETN6 SNAP 6-module retention rail (OEM) SNAP-RETN6B SNAP 6-module retention rail, 25-pack (OEM) SNAP-FUSE4AB SNAP 4-amp fuse, 25-pack OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 0773-180418 PAGE 2 Wiring Options SNAP digital input modules are compatible with all SNAP PAC brains and rack-mounted controllers, including Wired+WirelessTM. For easier, faster wiring of field devices to input modules, see the SNAP TEX Cables and Breakout Boards Data Sheet, form #1756. Each SNAP TEX cable snaps into the top of the module and terminates at the breakout board with 18-gauge, color-coded flying leads, already stripped and ready for wiring. Breakout boards offer optional fusing, fuse-blown indicators, and bussed power to loads.Specifications: AC Input Modules Notes for legacy hardware: These modules can also be used with SNAP Ultimate, SNAP Ethernet, and SNAP Simple brains, and with other SNAP brains such as the serial B3000 and the B3000HA. They also mount on B-series, M-series, and D-series racks. Specifications: AC Input Modules SNAP-IAC5 Key Feature SNAP-IAC5A -- SNAP-IAC5MA -- Diagnostic switches Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) Nominal Input Voltage 120 VAC/VDC 240 VAC/VDC 120 VAC/VDC Channel-to-channel isolation 300 VAC (1,500 V transient) 300 VAC (1,500 V transient) 300 VAC (1,500 V transient) Input Voltage Range 90-140 VAC/VDC 180-280 VAC/VDC 90-140 VAC/VDC Turn-on Voltage 90 VAC/VDC 180 VAC/VDC 90 VAC/VDC Turn-off Voltage 35 VAC/VDC 35 VAC/VDC 35 VAC/VDC Input Resistance 169 K ohms (nominal) 305 K ohms (nominal) 169 K ohms (nominal) Logic Output Voltage <.5 V max. (on) @ 2 mA sinking 2.7 V min. (off) @ 400 mA sourcing <.5 V max. (on) @ 2 mA sinking 2.7 V min. (off) @ 400 mA sourcing <.5 V max. (on) @ 2 mA sinking 2.7 V min. (off) @ 400 mA sourcing Logic Supply Voltage* 5 VDC 0.25 VDC 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum Negative True Logic Output Drive TTL 74 Series = 1 UL TTL 74LS Series = 5 UL TTL 74 Series = 1 UL TTL 74LS Series = 5 UL TTL 74 Series = 1 UL TTL 74LS Series = 5 UL 4 4 4 Turn-on Time 30 msec 30 msec 30 msec Turn-off Time 30 msec 30 msec 30 msec Optical Isolation, Field to Logic 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) Temperature -20 C to 70 C, operating -40 C to 85 C, storage -20 C to 70 C, operating -40 C to 85 C, storage -20 C to 70 C, operating -40 C to 85 C, storage Agency Approvals UL, CE, CSA, RoHS, DFARS UL, CE, CSA, RoHS, DFARS UL, CE, RoHS, DFARS Warranty Lifetime Lifetime 30 months Field Side Ratings (each channel) Logic Side Ratings Module Ratings Number of Channels Per Module * When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC. OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 0773-180418 PAGE 3 SPECIFICATIONS: DC INPUT MODULES See page 6 for SNAP-IDC5-SW and SNAP-IDC5-SW-NC specifications and wiring. SNAP-IDC5 Key Feature SNAP-IDC5D -- SNAP-IDC5G -- -- SNAP-IDC5-HT Leakage-tolerant Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5 VDC 48 VAC/VDC 24 VAC/VDC Channel-to-channel isola- 300 VAC tion (1,500 V transient) 300 VAC (1,500 V transient) 300 VAC (1,500 V transient) 300 VAC (1,500 V transient) Input Voltage Range 10-32 VAC/VDC 2.5-28 VDC 35-75 VAC/VDC 15-32 VAC/VDC Torque, connector screws 5.26 in-lb (0.6 N-m) Field Side Ratings (each channel) Nominal Input Voltage 24 VAC/VDC Turn-on Voltage 10 VAC/VDC 2.5 VDC 35 VAC/VDC 15 VAC/VDC Turn-off Voltage 3 VAC/VDC 1 VDC 7 VAC/VDC 8 VAC/VDC Input Resistance 15 K ohms (nominal) 3 K ohms (nominal) 64 K ohms (nominal) 3 K ohms (nominal) Logic Output Voltage <.5 V max. (on) @ 2 mA sinking 2.7 V min. (off) @ 0.4 mA sourcing <.5 V max. (on) @ 2 mA sinking 2.7 V min. (off) @ 0.4 mA sourcing <.5 V max. (on) @ 2 mA sinking 2.7 V min. (off) @ 0.4 mA sourcing <.5 V max. (on) @ 2 mA sinking 2.7 V min. (off) @ 0.4 mA sourcing Logic Supply Voltage*** 5 VDC 0.25 VDC 5 VDC 0.25 VDC 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum 50 mA maximum Negative True Logic Output Drive TTL 74 Series = 1 UL TTL 74 Series = 1 UL TTL 74 Series = 1 UL TTL 74 Series = 1 UL TTL 74LS Series = 5 UL TTL 74LS Series = 5 UL TTL 74LS Series = 5 UL TTL 74LS Series = 5 UL Logic Side Ratings Module Ratings Number of Channels Per Module 4 4 4 4 Turn-on Time 5 msec 1 msec 5 msec 20 msec Turn-off Time 15 msec 1 msec 15 msec 25 msec Optical Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) Temperature -20 to 70 C, operating -40 to 85 C, storage -20 to 70 C, operating -40 to 85 C, storage -20 to 70 C, operating -40 to 85 C, storage -20 to 70 C, operating -40 to 85 C, storage Agency Approvals UL, CE, CSA, RoHS, DFARS UL, CE, CSA, RoHS, DFARS UL, CE, RoHS, DFARS CE, RoHS, DFARS Warranty Lifetime Lifetime Lifetime Lifetime * At 20kHz, 5Vp-p square wave input, 50% duty cycle. ** At 20kHz, 28Vp-p square wave input, 50% duty cycle. *** When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC. OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 0773-180418 PAGE 4 SPECIFICATIONS: DC INPUT MODULES (CONTINUED) See page 6 for SNAP-IDC5-SW and SNAP-IDC5-SW-NC specifications and wiring.) SNAP-IDC5-FAST* SNAP-IDC5-FAST-A** SNAP-IDC5MA Key Feature High-speed High-speed Diagnostic switches Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) Field Side Ratings (each channel) Nominal Input Voltage 5 VDC 28 VDC 24 VAC/VDC Channel-to-channel isolation 300 VAC (1,500 V transient) 300 VAC (1,500 V transient) 300 VAC (1,500 V transient) Input Voltage Range 2.5-16 VDC 18-32 VDC 10-32 VAC/VDC Turn-on Voltage 2.5 VDC 18 VDC 10 VAC/VDC Turn-off Voltage 1 VDC 5 VDC 3 VAC/VDC Input Resistance 440 ohms (nominal) 8 K ohms (nominal) 15 K ohms (nominal) Logic Output Voltage <0.5 V max. (on) @ 2 mA sinking 2.7 V min. (off) @ 0.4 mA sourcing <0.5 V max. (on) @ 2 mA sinking 2.7 V min. (off) @ 0.4 mA sourcing <0.5 V max. (on) @ 2 mA sinking 2.7 V min. (off) @ 400 mA sourcing Logic Side Ratings Logic Supply Voltage*** 5 VDC 0.25 VDC 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum Negative True Logic Output Drive TTL 74 Series = 1 UL TTL 74LS Series = 5 UL TTL 74 Series = 1 UL TTL 74LS Series = 5 UL TTL 74 Series = 1 UL TTL 74LS Series = 5 UL Number of Channels Per Module 4 4 4 Turn-on Time 0.025 msec* 0.025 msec** 5 msec Turn-off Time 0.025 msec* 0.025 msec** 15 msec Optical Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) Temperature -20 C to 70 C, operating -40 C to 85 C, storage -20 C to 70 C, operating -40 C to 85 C, storage -20 C to 70 C, operating -40 C to 85 C, storage Agency Approvals UL, CE, ATEX, FM, CSA, RoHS, DFARS UL, CE, CSA, RoHS, DFARS CE, RoHS, DFARS Warranty Lifetime Lifetime 30 months Module Ratings * At 20kHz, 5Vp-p square wave input, 50% duty cycle. ** At 20kHz, 28Vp-p square wave input, 50% duty cycle. *** When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC. OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 0773-180418 PAGE 5 SPECIFICATIONS: AC AND DC INPUT MODULES (FM MODELS) SNAP-IAC5FM SNAP-IAC5AFM SNAP-IDC5FM SNAP-IDC5DFM Key Feature Factory Mutual approved Factory Mutual approved Factory Mutual approved Factory Mutual approved Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) Field Side Ratings (each channel) Nominal Input Voltage 120 VAC/VDC 240 VAC/ VDC 24 VAC/VDC 5 VDC Channel-to-channel isolation 300 VAC (1,500 V transient) 300 VAC (1,500 V transient) 300 VAC (1,500 V transient) 300 VAC (1,500 V transient) Input Voltage Range 90-140 VAC/VDC 180-280 VAC/VDC 10-32 VAC/VDC 2.5-28 VDC Turn-on Voltage 90 VAC/VDC 180 VAC/VDC 10 VAC/VDC 2.5 VDC Turn-off Voltage 35 VAC/VDC 35 VAC/VDC 3 VAC/VDC 1 VDC Input Resistance 169 K ohms (nominal) 305 K ohms (nominal) 15 K ohms (nominal) 3 K ohms (nominal) Logic Output Voltage <.5 V max. (on) @ 2 mA sinking 2.7 V min. (off) @ 400 mA sourcing <.5 V max. (on) @ 2 mA sinking 2.7 V min. (off) @ 400 mA sourcing <.5 V max. (on) @ 2 mA sinking 2.7 V min. (off) @ 0.4 mA sourcing <.5 V max. (on) @ 2 mA sinking 2.7 V min. (off) @ 0.4 mA sourcing Logic Side Ratings Logic Supply Voltage* 5 VDC 0.25 VDC 5 VDC 0.25 VDC 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum 50 mA maximum Negative True Logic Output Drive TTL 74 Series=1 UL TTL 74LS Series=5 UL TTL 74 Series=1 UL TTL 74LS Series=5 UL TTL 74 Series=1 UL TTL 74LS Series=5 UL TTL 74 Series=1 UL TTL 74LS Series=5 UL Number of Channels Per Module 4 4 4 4 Turn-on Time 30 msec 30 msec 5 msec 1 msec Turn-off Time 30 msec 30 msec 15 msec 1 msec Optical Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) Temperature -20 to 70 C, operating -40 to 85 C, storage -20 to 70 C, operating -40 to 85 C, storage -20 to 70 C, operating -40 to 85 C, storage -20 to 70 C, operating -40 to 85 C, storage Agency Approvals CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS CE, FM, ATEX, RoHS, DFARS Warranty Lifetime Lifetime Lifetime Lifetime Module Ratings *When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC. OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 0773-180418 PAGE 6 SNAP-IDC5-SW AND SNAP-IDC5-SW-NC MODULES Description The SNAP-IDC5-SW and SNAP-IDC5-SW-NC modules provide four channels of contact status input. Each module supplies 15 volts of power to an external dry contact switch. The SNAP-IDC5-SW senses switch closure; the SNAP-IDC5-SW-NC senses switch opening. Each user-supplied switch is connected with two wires. Because these modules include power for the switch, they are particularly cost-effective when labor costs for wiring external power are high. Typical switches for use with these modules are switched status sensors (level sensors, pressure indicators, etc.), magnetic reed switches (used on doors or windows for burglar alarms), snap-action micro switches, the auxilliary switches on motor starters, and most relay contacts. Specifications Field Side Ratings (each channel) Open Circuit Voltage (Switch Open) 15 VDC typical Short Circuit Current (Switch Closed) 7 milliamps nominal Minimum Off Resistance >20 K ohms Maximum Allowable On Resistance (Wire + Contact Resistance) 500 ohms Logic Side Ratings CAUTION: The SNAP-IDC5-SW and SNAP-IDC5-SW-NC inputs are not intended to be used with contacts that are connected to any external user-supplied voltage or currents. Logic Output Voltage for SNAP-IDC5-SW (normally open) <0.5 V max. (switch closed; LED on) @ 2 mA sinking 2.7 V min. (switch open; LED off) @ 0.4 mA sourcing SNAP-IDC5-SW and SNAP-IDC5-SW-NC Wiring Diagram Logic Output Voltage for SNAP-IDC5-SW-NC (normally closed) <0.5 V max.(switch closed; LED off) @ 2 mA sinking 2.7 V min. (switch open; LED on) @ 0.4 mA sourcing Maximum Operating Common Mode Voltage (Field Term to Logic Connector) 250 V Power Requirements 5 VDC (0.25) @ 200 mA Module Ratings Number of Channels Per Module 4 Turn-on Time 5 msec Turn-off Time 25 msec Channel-to-channel IsolaNone tion Input-to-output Isolation 1500 V AC/DC Wire size 22 to 14 AWG Torque, hold-down screws 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) Temperature -20 C to 70 C, operating -40 C to 85 C, storage Agency Approvals UL, CE, RoHS, DFARS FM (SNAP-IDC5SW only) Warranty Lifetime OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 0773-180418 PAGE 7 SCHEMATICS Most AC and DC Input Modules See previous page for SNAP-IDC5-SW and SNAP-IDC5-SW-NC wiring diagram. MA Modules with Manual/Auto Switches (Top View) OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 0773-180418 PAGE 8 DIMENSIONAL DRAWING All Modules Except MA OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 0773-180418 PAGE 9 DIMENSIONAL DRAWING All MA Modules OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 0773-180418 PAGE 10 DIMENSIONAL DRAWING All Models IMPORTANT: The mounting rack connector has 24 pins; the module connector has 20 pins. The extra pins on the mounting rack connector prevent misalignment of the module during installation. OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 0773-180418 PAGE 11 DIMENSIONAL DRAWING All Models SNAP Digital Module Mounted on SNAP Rack OPTO 22 * www.opto22.com 43044 Business Park Dr. Temecula, CA 92590-3614 SALES * sales@opto22.com 800-321-6786 * 1-951-695-3000 SUPPORT * support@opto22.com 800-835-6786 * 1-951-695-3080 (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.