OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE 1
DATA SHEET
Form 0773-180418
SNAP DIGITAL INPUT MODULES
Features
Four channels per module
4,000-volt transient isolation
Convenient pluggable wiring terminals
Channel-specific LEDs
UL and CE approved
Accepts 22 to 14 AWG wire
Factory Mutual approved (part numbers ending in FM)
DESCRIPTION
This data sheet covers SNAP digital input modules with four
channels. For modules with 16 or 32 channels, see form 1556, the
SNAP High-Density Digital Modules Data Sheet.
Opto 22 SNAP I/O 4-channel digital input modules are part of the
SNAP PAC System. Optical isolation on these modules provides
4,000 volts of transient (4000 V for 1 ms) protection for sensitive
control electronics from industrial field signals. Digital input
modules can sense either AC or DC signals.
All SNAP 4-channel digital modules have removable top-mounted
connectors to provide easy access for field wiring, and all operate
on 5 VDC control logic. Each digital module features integral
channel-specific LEDs for convenient troubleshooting and
maintenance. Each module is factory tested twice and is UL and CE
approved. In addition, part numbers ending in FM are Factory
Mutual approved.
SNAP input modules are used to sense the on or off status for AC or
DC voltages from such sources as proximity switches, push
buttons, or auxiliary contacts. The SNAP-IDC5G is ideal for
detecting 48 VDC in telecom applications. The SNAP-IDC5-HT is
designed for sensors that have a high leakage current.
The SNAP-IDC5-SW and SNAP-IDC5-SW-NC modules supply power
to an external dry contact switch and sense switch closure
(SNAP-IDC5-SW) or opening (SNAP-IDC5-SW-NC).
SNAP-IAC5MA and SNAP-IDC5MA feature manual-on/manual-off/
automatic switches, ideal for testing control applications. The
switches override input from field devices, so you can determine
whether a problem lies in the application or in the device.
SNAP racks use a retention rail locking system. Use two 4-40 by
½-inch standard machine screws to hold each module in position
on the SNAP rack.
>
>
>
>
>
>
>
SNAP Digital Input Modules
Part Numbers
Part Description
SNAP-IAC5 SNAP 4-channel 90–140 VAC input, 5 VDC logic
SNAP-IAC5A SNAP 4-channel 180–280 VAC input, 5 VDC logic
SNAP-IAC5MA SNAP 4-channel isolated 90–140 VAC/VDC input,
5 VDC logic, with manual/auto switches
SNAP-IAC5FM SNAP 4-channel 90–140 VAC/VDC input, 5 VDC
logic, Factory Mutual approved
SNAP-IAC5AFM SNAP 4-channel 180–280 VAC input, 5 VDC logic,
Factory Mutual approved
SNAP-IDC5 SNAP 4-channel 10–32 VDC input, 5 VDC logic
SNAP-IDC5D SNAP 4-channel 2.5–28 VDC input, 5 VDC logic
SNAP-IDC5-FAST SNAP 4-channel high-speed 2.5–16 VDC input,
5 VDC logic
SNAP-IDC5-FAST-A SNAP 4-channel high-speed 18–32 VDC input,
5 VDC logic
SNAP-IDC5G SNAP 4-channel 35–75 VAC/DC input, 5 VDC logic
SNAP-IDC5-HT SNAP 4-channel 15–32 VDC leakage-tolerant
input, 5 VDC logic
SNAP-IDC5MA SNAP 4-channel isolated 10–32 VAC/VDC input,
5 VDC logic, with manual/auto switches
SNAP-IDC5-SW SNAP 4-channel switch status input, normally open
SNAP-IDC5-SW-NC SNAP 4-channel switch status input, normally
closed
SNAP-IDC5FM SNAP 4-channel 10–32 VDC input, 5 VDC logic,
Factory Mutual approved
SNAP-IDC5DFM SNAP 4-channel 2.5–28 VDC input, 5 VDC logic
SNAP-RETN4 SNAP 4-module retention rail (OEM)
SNAP-RETN4B SNAP 4-module retention rail, 25-pack (OEM)
SNAP-RETN6 SNAP 6-module retention rail (OEM)
SNAP-RETN6B SNAP 6-module retention rail, 25-pack (OEM)
SNAP-FUSE4AB SNAP 4-amp fuse, 25-pack
PAGE 2
OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
DATA SHEET
Form 0773-180418
SNAP digital input modules are compatible with all SNAP PAC brains
and rack-mounted controllers, including Wired+Wireless™.
Notes for legacy hardware: These modules can also be used with
SNAP Ultimate, SNAP Ethernet, and SNAP Simple brains, and with
other SNAP brains such as the serial B3000 and the B3000HA. They
also mount on B-series, M-series, and D-series racks.
Wiring Options
For easier, faster wiring of field devices to input modules, see the SNAP
TEX Cables and Breakout Boards Data Sheet, form #1756. Each SNAP
TEX cable snaps into the top of the module and terminates at the
breakout board with 18-gauge, color-coded flying leads, already
stripped and ready for wiring. Breakout boards offer optional fusing,
fuse-blown indicators, and bussed power to loads.Specifications: AC
Input Modules
Specifications: AC Input Modules
SNAP-IAC5 SNAP-IAC5A SNAP-IAC5MA
Key Feature -- -- Diagnostic switches
Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG
Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)
Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)
Field Side Ratings (each channel)
Nominal Input Voltage 120 VAC/VDC 240 VAC/VDC 120 VAC/VDC
Channel-to-channel isolation 300 VAC
(1,500 V transient)
300 VAC
(1,500 V transient)
300 VAC
(1,500 V transient)
Input Voltage Range 90–140 VAC/VDC 180–280 VAC/VDC 90–140 VAC/VDC
Turn-on Voltage 90 VAC/VDC 180 VAC/VDC 90 VAC/VDC
Turn-off Voltage 35 VAC/VDC 35 VAC/VDC 35 VAC/VDC
Input Resistance 169 K ohms (nominal) 305 K ohms (nominal) 169 K ohms (nominal)
Logic Side Ratings
Logic Output Voltage
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 400 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 400 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 400 mA sourcing
Logic Supply Voltage* 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC
Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum
Negative True Logic
Output Drive
TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL
TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL
TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL
Module Ratings
Number of Channels Per Module 4 4 4
Turn-on Time 30 msec 30 msec 30 msec
Turn-off Time 30 msec 30 msec 30 msec
Optical Isolation, Field to Logic 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient)
Temperature -20 °C to 70 °C, operating
-40 °C to 85 °C, storage
-20 °C to 70 °C, operating
-40 °C to 85 °C, storage
-20 °C to 70 °C, operating
-40 °C to 85 °C, storage
Agency Approvals UL, CE, CSA, RoHS, DFARS UL, CE, CSA, RoHS, DFARS UL, CE, RoHS, DFARS
Warranty Lifetime Lifetime 30 months
* When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC.
OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE 3
DATA SHEET
Form 0773-180418
SPECIFICATIONS: DC INPUT MODULES
See page 6 for SNAP-IDC5-SW and SNAP-IDC5-SW-NC specifications and wiring.
SNAP-IDC5 SNAP-IDC5D SNAP-IDC5G SNAP-IDC5-HT
Key Feature -- -- -- Leakage-tolerant
Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG
Torque, hold-down
screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)
Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)
Field Side Ratings (each channel)
Nominal Input Voltage 24 VAC/VDC 5 VDC 48 VAC/VDC 24 VAC/VDC
Channel-to-channel isola-
tion
300 VAC
(1,500 V transient)
300 VAC
(1,500 V transient)
300 VAC
(1,500 V transient)
300 VAC
(1,500 V transient)
Input Voltage Range 10–32 VAC/VDC 2.5–28 VDC 35–75 VAC/VDC 15–32 VAC/VDC
Turn-on Voltage 10 VAC/VDC 2.5 VDC 35 VAC/VDC 15 VAC/VDC
Turn-off Voltage 3 VAC/VDC 1 VDC 7 VAC/VDC 8 VAC/VDC
Input Resistance 15 K ohms (nominal) 3 K ohms (nominal) 64 K ohms (nominal) 3 K ohms (nominal)
Logic Side Ratings
Logic Output Voltage
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
Logic Supply Voltage*** 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC
Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum 50 mA maximum
Negative True Logic Out-
put Drive
TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL
TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL
TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL
TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL
Module Ratings
Number of Channels Per
Module 4 4 4 4
Turn-on Time 5 msec 1 msec 5 msec 20 msec
Turn-off Time 15 msec 1 msec 15 msec 25 msec
Optical Isolation
(Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient)
Temperature -20 to 70 °C, operating
-40 to 85 °C, storage
-20 to 70 °C, operating
-40 to 85 °C, storage
-20 to 70 °C, operating
-40 to 85 °C, storage
-20 to 70 °C, operating
-40 to 85 °C, storage
Agency Approvals UL, CE, CSA, RoHS,
DFARS
UL, CE, CSA, RoHS,
DFARS UL, CE, RoHS, DFARS CE, RoHS, DFARS
Warranty Lifetime Lifetime Lifetime Lifetime
* At 20kHz, 5Vp-p square wave input, 50% duty cycle.
** At 20kHz, 28Vp-p square wave input, 50% duty cycle.
*** When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC.
PAGE 4
OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
DATA SHEET
Form 0773-180418
SPECIFICATIONS: DC INPUT MODULES (CONTINUED)
See
page 6
for SNAP-IDC5-SW and SNAP-IDC5-SW-NC specifications and wiring.)
SNAP-IDC5-FAST* SNAP-IDC5-FAST-A** SNAP-IDC5MA
Key Feature High-speed High-speed Diagnostic switches
Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG
Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)
Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)
Field Side Ratings (each channel)
Nominal Input Voltage 5 VDC 28 VDC 24 VAC/VDC
Channel-to-channel isola-
tion
300 VAC
(1,500 V transient)
300 VAC
(1,500 V transient)
300 VAC
(1,500 V transient)
Input Voltage Range 2.5–16 VDC 18–32 VDC 10–32 VAC/VDC
Turn-on Voltage 2.5 VDC 18 VDC 10 VAC/VDC
Turn-off Voltage 1 VDC 5 VDC 3 VAC/VDC
Input Resistance 440 ohms (nominal) 8 K ohms (nominal) 15 K ohms (nominal)
Logic Side Ratings
Logic Output Voltage
<0.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
<0.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
<0.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 400 mA sourcing
Logic Supply Voltage*** 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC
Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum
Negative True Logic
Output Drive
TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL
TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL
TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL
Module Ratings
Number of Channels Per
Module 444
Turn-on Time 0.025 msec* 0.025 msec** 5 msec
Turn-off Time 0.025 msec* 0.025 msec** 15 msec
Optical Isolation
(Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient)
Temperature -20 °C to 70 °C, operating
-40 °C to 85 °C, storage
-20 °C to 70 °C, operating
-40 °C to 85 °C, storage
-20 °C to 70 °C, operating
-40 °C to 85 °C, storage
Agency Approvals UL, CE, ATEX, FM, CSA,
RoHS, DFARS
UL, CE, CSA, RoHS,
DFARS CE, RoHS, DFARS
Warranty Lifetime Lifetime 30 months
* At 20kHz, 5Vp-p square wave input, 50% duty cycle.
** At 20kHz, 28Vp-p square wave input, 50% duty cycle.
*** When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC.
OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE 5
DATA SHEET
Form 0773-180418
SPECIFICATIONS: AC AND DC INPUT MODULES (FM MODELS)
SNAP-IAC5FM SNAP-IAC5AFM SNAP-IDC5FM SNAP-IDC5DFM
Key Feature Factory Mutual
approved
Factory Mutual
approved
Factory Mutual
approved
Factory Mutual
approved
Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG
Torque, hold-down
screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)
Torque, connector
screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)
Field Side Ratings (each channel)
Nominal Input Voltage 120 VAC/VDC 240 VAC/ VDC 24 VAC/VDC 5 VDC
Channel-to-channel
isolation
300 VAC
(1,500 V transient)
300 VAC
(1,500 V transient)
300 VAC
(1,500 V transient)
300 VAC
(1,500 V transient)
Input Voltage Range 90–140 VAC/VDC 180–280 VAC/VDC 10–32 VAC/VDC 2.5–28 VDC
Turn-on Voltage 90 VAC/VDC 180 VAC/VDC 10 VAC/VDC 2.5 VDC
Turn-off Voltage 35 VAC/VDC 35 VAC/VDC 3 VAC/VDC 1 VDC
Input Resistance 169 K ohms (nominal) 305 K ohms (nominal) 15 K ohms (nominal) 3 K ohms (nominal)
Logic Side Ratings
Logic Output Voltage
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 400 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 400 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
Logic Supply Voltage* 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC
Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum 50 mA maximum
Negative True Logic
Output Drive
TTL 74 Series=1 UL
TTL 74LS Series=5 UL
TTL 74 Series=1 UL
TTL 74LS Series=5 UL
TTL 74 Series=1 UL
TTL 74LS Series=5 UL
TTL 74 Series=1 UL
TTL 74LS Series=5 UL
Module Ratings
Number of Channels
Per Module 4444
Turn-on Time 30 msec 30 msec 5 msec 1 msec
Turn-off Time 30 msec 30 msec 15 msec 1 msec
Optical Isolation
(Field Side to
Logic Side)
4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient)
Temperature -20 to 70 °C, operating
-40 to 85 °C, storage
-20 to 70 °C, operating
-40 to 85 °C, storage
-20 to 70 °C, operating
-40 to 85 °C, storage
-20 to 70 °C, operating
-40 to 85 °C, storage
Agency Approvals CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS CE, FM, ATEX, RoHS,
DFARS
Warranty Lifetime Lifetime Lifetime Lifetime
*When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC.
PAGE 6
OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
DATA SHEET
Form 0773-180418
SNAP-IDC5-SW AND SNAP-IDC5-SW-NC MODULES
Description
The SNAP-IDC5-SW and SNAP-IDC5-SW-NC modules provide four
channels of contact status input. Each module supplies 15 volts of
power to an external dry contact switch. The SNAP-IDC5-SW senses
switch closure; the SNAP-IDC5-SW-NC senses switch opening. Each
user-supplied switch is connected with two wires. Because these
modules include power for the switch, they are particularly
cost-effective when labor costs for wiring external power are high.
Typical switches for use with these modules are switched status
sensors (level sensors, pressure indicators, etc.), magnetic reed
switches (used on doors or windows for burglar alarms), snap-action
micro switches, the auxilliary switches on motor starters, and most
relay contacts.
CAUTION: The SNAP-IDC5-SW and SNAP-IDC5-SW-NC inputs are not
intended to be used with contacts that are connected to any external
user-supplied voltage or currents.
SNAP-IDC5-SW and SNAP-IDC5-SW-NC
Wiring Diagram
Specifications
Field Side Ratings (each channel)
Open Circuit Voltage
(Switch Open) 15 VDC typical
Short Circuit Current
(Switch Closed) 7 milliamps nominal
Minimum Off Resistance >20 K ohms
Maximum Allowable On
Resistance (Wire + Con-
tact Resistance)
500 ohms
Logic Side Ratings
Logic Output Voltage for
SNAP-IDC5-SW
(normally open)
<0.5 V max. (switch closed; LED on)
@ 2 mA sinking
2.7 V min. (switch open; LED off)
@ 0.4 mA sourcing
Logic Output Voltage for
SNAP-IDC5-SW-NC
(normally closed)
<0.5 V max.(switch closed; LED off)
@ 2 mA sinking
2.7 V min. (switch open; LED on)
@ 0.4 mA sourcing
Maximum Operating
Common Mode Voltage
(Field Term to Logic Con-
nector)
250 V
Power Requirements 5 VDC (±0.25) @ 200 mA
Module Ratings
Number of Channels Per
Module 4
Turn-on Time 5 msec
Turn-off Time 25 msec
Channel-to-channel Isola-
tion None
Input-to-output Isolation 1500 V AC/DC
Wire size 22 to 14 AWG
Torque, hold-down screws 4 in-lb (0.45 N-m)
Torque, connector screws 5.26 in-lb (0.6 N-m)
Temperature -20 °C to 70 °C, operating
-40 °C to 85 °C, storage
Agency Approvals UL, CE, RoHS, DFARS
FM (SNAP-IDC5SW only)
Warranty Lifetime
OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE 7
DATA SHEET
Form 0773-180418
SCHEMATICS
Most AC and DC Input Modules
See previous page for SNAP-IDC5-SW and SNAP-IDC5-SW-NC wiring diagram.
MA Modules with Manual/Auto Switches (Top View)
PAGE 8
OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
DATA SHEET
Form 0773-180418
DIMENSIONAL DRAWING
All Modules Except MA
OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE 9
DATA SHEET
Form 0773-180418
DIMENSIONAL DRAWING
All MA Modules
PAGE 10
OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
DATA SHEET
Form 0773-180418
DIMENSIONAL DRAWING
All Models
IMPORTANT: The mounting rack connector has 24
pins; the module connector has 20 pins. The extra
pins on the mounting rack connector prevent
misalignment of the module during installation.
PAGE 11
OPTO 22 • www.opto22.com SALES • sales@opto22.com SUPPORT • support@opto22.com
43044 Business Park Dr. Temecula, CA 92590-3614 800-321-6786 • 1-951-695-3000 800-835-6786 • 1-951-695-3080
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
DATA SHEET
Form 0773-180418
DIMENSIONAL DRAWING
All Models
SNAP Digital Module Mounted on SN AP Rack
