Si9987 Vishay Siliconix Buffered H-Bridge FEATURES D D D D D D APPLICATIONS 1.0-A H-Bridge 500-kHz Switching Rate Shoot-Through Limited TTL Compatible Inputs 3.8- to 13.2-V Operating Range Surface Mount Packaging D D D D D D D VCM Driver Brushed Motor Driver Stepper Motor Driver Power Converter Optical Disk Drives Power Supplies High Performance Servo DESCRIPTION The Si9987 is an integrated, buffered H-bridge with TTL compatible inputs and the capability of delivering a continuous 1.0 A @ VDD = 5.0 V (room temperature) at switching rates up to 500 kHz. Internal logic prevents the upper and lower outputs of either half-bridge from being turned on simultaneously. Unique input codes allow both outputs to be forced low (for braking) or forced to a high impedance level. The Si9987 is available in an 8-Pin SOIC package, specified to operate over a voltage range of 3.8 V to 13.2 V, and the commercial temperature range of 0 to 70_C (C suffix) and -40 to 85_C (D suffix). The Si9987 is available in lead free. FUNCTIONAL BLOCK DIAGRAM, PIN CONFIGURATION AND TRUTH TABLE SO-8 VDD SA 1 8 OUTA GND 2 7 INA VDD 3 6 INB SB 4 5 OUTB Si9987 (3) (7) INA Top View Shoot-Through Protection Logic TRUTH TABLE INA INB OUTA OUTB 1 0 1 0 0 1 0 1 0 0 0 0 1 1 HiZ HiZ (6) INB (2) (1) GND (8) SA (5) OUTPUT A B (4) SB ORDERING INFORMATION Document Number: 70864 S-40132--Rev. D, 16-Feb-04 Part Number Temperature Range Si9987CY-T1 0 to 70_C Si9987DY-T1 -40 to 85_C Si9987CY-T1--E3 0 to 70_C Si9987DY-T1--E3 -40 to 85_C Si9987CY 0 to 70_C Si9987DY -40 to 85_C Package Tape and Reel Lead Free Tape and Reel Bulk (tubes) www.vishay.com 1 Si9987 Vishay Siliconix ABSOLUTE MAXIMUM RATINGSa Voltage on any pin with respect to ground . . . . . . . . . . . -0.3 V to VDD +0.3 V Voltage on pins 5, 8 with respect to GND . . . . . . . . . . . . . . -1 V to VDD +1 V Voltage on pins 1, 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to GND +1 V Maximum VDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 V Peak Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 A Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to 150_C Maximum Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . . 150_C Power Dissipationb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 W qJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100_C/W Continuous IOUT Current (TJ = 135_C)c TA = 25_C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . "1.02 A TA = 70_C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . "0.75 A TA = 85_C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . "0.65 A Operating Temperature Range Si9987CY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 70_C Si9987DY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40 to 85_C Notes a. Device mounted with all leads soldered or welded to PC board. b. Derate 10 mW/_C above 25_C. c. TJ = TA + (PD x qJA), PD = Power Dissipation . RECOMMENDED OPERATING RANGE VDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8 V to 13.2 V Maximum Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . . 135_C SPECIFICATIONS Test Conditions Unless Specified Parameter Symbol VDD = 3.8 to 13.2 V SA @ GND, SB @ GND Limits Mina Typb Maxa Unit Input Input Voltage High VINH Input Voltage Low VINL 2 Input Current with Input Voltage High IINH VIN = 2 V Input Current with Input Voltage Low IINL VIN = 0 V 1 1 -1 V mA Output IOUT = -1 1A Output p Voltage g High g c VOUTH IOUT = -500 500 mA VDD = 10.8 V 10.40 VDD = 4.5 V 4.00 4.20 VDD = 10.8 V 10.60 10.68 VDD = 4.5 V 4.25 4.35 3.63 3.70 IOUT = -300 mA, VDD = 3.8 V IOUT = 1 A Output p Voltage g Lowc VOUTL 10.56 VDD = 10.8 V 0.24 0.40 VDD = 4.5 V 0.30 0.50 VDD = 10.8 V 0.12 0.20 VDD = 4.5 V 0.15 0.25 IOUT = 300 mA, VDD = 3.8 V 0.10 0.17 0 10 IOUT = 500 mA Output Leakage Current Low IOLL INA = INB w 2 V, VOUT = VDD = 13.2 V Output Leakage Current High IOLH VOUT = 0, VDD = 13.2 V Output V Clamp High VCLH Output V Clamp Low VCLL INA = INB w 2 V -10 IOUT = 100 mA IOUT = -100 mA 0 VDD +0.7 -0.9 VDD +0.9 -0.7 V mA V Supply VDD Supply Current IDD IN = 100 kHz, VDD = 5.5 V 1.8 2.5 mA INA = INB = 4.5 V, VDD = 5.5 V 75 125 mA Dynamic Propogation Delay Time TPLH TPHL VDD = 5 V 300 nS 100 Notes a. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. b. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. c. Maximum value measured at TJ = 135_C. Typical value measured at TJ = TA = 25_C (pulse width v 300 msec, duty cycle v 2%). www.vishay.com 2 Document Number: 70864 S-40132--Rev. D, 16-Feb-04 Si9987 Vishay Siliconix TYPICAL CHARACTERISTICS (25_C UNLESS NOTED) Output High Voltage vs. Output Current 12 VDD = 10.8 V 400 VOUTL (mV) 9 VOUTH (V) Output Low Voltage vs. Output Current 500 6 4.5 V 3 3.8 V 0 0.50 0.75 4.5 V VDD = 3.8 V 300 10.8 V 200 100 1.00 1.25 0 0.50 1.50 0.75 Output Current (A) 1.25 1.50 Output Current (A) Supply Current vs. Supply Voltage 200 1.00 Supply Current vs. Supply Voltage 6 f = 100 kHz 5 4 I DD (mA) I DD - Standby ( m A) 160 120 3 2 80 1 40 4 6 8 10 12 0 14 4 VDD - Supply Voltage (V) Supply Current vs. Temperature 200 8 10 12 14 Supply Current vs. Temperature f = 100 kHz VDD = 13.2 V 6 160 140 I DD (mA) I DD - Standby ( m A) 8 VDD = 13.2 V 180 6 VDD - Supply Voltage (V) 120 100 4 5.5 V 2 5.5 V 80 60 -35 -20 -5 10 25 40 Temperature (_C) Document Number: 70864 S-40132--Rev. D, 16-Feb-04 55 70 85 0 -35 -20 -5 10 25 40 55 70 85 Temperature (_C) www.vishay.com 3 Si9987 Vishay Siliconix TYPICAL CHARACTERISTICS (25_C UNLESS NOTED) Propagation Time vs. Supply Voltage 600 500 12 400 I DD (mA) Delay Time (ns) Supply Current vs. Frequency 15 300 TPLH 200 6 5.5 V 3 TPHL 100 VDD = 13.2 V 9 3.8 V 0 0 3 6 9 12 15 0 50 150 Supply Current vs. Supply Voltage ROUT vs. VDD 0.50 0.46 f = 500 kHz 28 0.42 TA = 135_C 0.38 21 R OUT ( W ) I DD (mA) 200 f - Frequency (kHz) VDD - Supply Voltage (V) 35 100 14 0.34 85_C 0.30 25_C 0.26 0.22 7 -40_C 0.18 0.14 0 0.10 4 6 8 10 12 14 2 4 6 8 VDD - Supply Voltage (v) 0.5 1.5 4.5 V 10.8 V 5.5 V 13.2 V 0.2 R OUT Normalized ( W ) R OUT ( W ) 14 ROUT Normalized vs. Junction Temperature (TJ) 1.4 VDD = 3.8 V 0.3 12 VDD ROUT vs. Junction Temperature (TJ) 0.4 10 VDD = 10.8 V 1.3 1.2 VDD = 4.5 V 1.1 1.0 0.9 0.8 0.7 0.1 -50 0 50 Temperature (_C) www.vishay.com 4 100 150 0.6 -50 -25 0 25 50 75 100 125 150 Temperature (_C) Document Number: 70864 S-40132--Rev. D, 16-Feb-04 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1 Package Information Vishay Siliconix SOIC (NARROW): 8-LEAD JEDEC Part Number: MS-012 8 6 7 5 E 1 3 2 H 4 S h x 45 D C 0.25 mm (Gage Plane) A e B All Leads q A1 L 0.004" MILLIMETERS INCHES DIM Min Max Min Max A 1.35 1.75 0.053 0.069 A1 0.10 0.20 0.004 0.008 B 0.35 0.51 0.014 0.020 C 0.19 0.25 0.0075 0.010 D 4.80 5.00 0.189 0.196 E 3.80 4.00 0.150 e 0.101 mm 1.27 BSC 0.157 0.050 BSC H 5.80 6.20 0.228 0.244 h 0.25 0.50 0.010 0.020 L 0.50 0.93 0.020 0.037 q 0 8 0 8 S 0.44 0.64 0.018 0.026 ECN: C-06527-Rev. I, 11-Sep-06 DWG: 5498 Document Number: 71192 11-Sep-06 www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000