New Product Release Summary for 3M Authorized Sales Reps and Distributors 3MTM Internal MiniSAS HD to Internal MiniSAS 36-Position Hybrid Cable Assembly, 8U Series Issue Number: Date: 877 March 28, 2014 Product Description 3M is releasing internal hybrid assemblies, with miniSAS HD (SFF-8643) on one end, and miniSAS 36position (SFF-8087) on the other. These assemblies use the popular 3MTM Twin Axial Cable SL8800 Series. 3M already sells symmetric assemblies using these SAS form factors. Hybrid assemblies allow integration of systems requiring connection from internal HD miniSAS to internal miniSAS. Customers may be trying to integrate newer and older equipment, or using some new equipment that has not adopted SFF-8643 as an interface. Both of these SFF standards are part of Serial Attached SCSI (SAS) 3.0, the latest version of the specification issued. Cable assemblies are available with or without sidebands. Market Segments/Customer Applications Server/Storage * HBAs (Host Bus Adapters) servers * Host system boards * Storage racks * Switches * Blades * Storage bridge bay * RAIDs (Redundant Array of Individual Disks) * JBODs (Just a Bunch of Disks) Computer Applications * Tower and rackmount computers * Workstations Competitive Situation As with other SAS assemblies, there are several competitors with capability and product. Continue to seek out the high-value opportunities, and particularly applications that benefit from the unique mechanical advantages of 3M Twin Axial Cable. * FCI - may use 3M Twin Axial Cable SL8800 Series, or discrete pair. They are not a big SFF-8087 supplier. * Molex - discrete pair twin axial construction. * Amphenol - discrete pair ribbon construction, some of their own ribbon construction. * Serial Cables - may use 3M Twin Axial Cable, SL8800 Series, or discrete pair. New Product Release Summary for 3M Authorized Sales Reps and Distributors 3MTM Internal MiniSAS HD to Internal MiniSAS 36-Position Hybrid Cable Assembly Selling 3M's Value Proposition The low-profile ribbon design of the 3MTM Twin Axial Cable allows for greater density applications and lower airflow obstruction. The cable's bendability allows for higher routing freedom in high-density applications with no significant impact to performance. Sales Support Materials Configuration Internal HD MiniSAS to Internal miniSAS 36P Hybrid Cable Assembly Documents Updated Internal MiniSAS Sales Sheet Internal MiniSAS HD to MiniSAS 36P Hybrid Cable Assembly PDS Part Number Customer Drawing 8UH4-XXX13-00-X.XX Document Number 80-4000-1997-4 78-5102-0195-3 Ordering Information/Lead Time Pricing and Samples Samples will be available through the Sample Center. Related Products * * * 3MTM High Routability Internal miniSAS Cable Assembly, 36-position, 8F36 Series 3MTM High Routability Internal miniSAS Cable Assembly, 68-position, 8F68 Series 3MTM High Routability Internal miniSAS HD Cable Assembly, 8US4 Series 78-5100-2622-8 New Product Release Summary for 3M Authorized Sales Reps and Distributors 3MTM Internal MiniSAS HD to Internal MiniSAS 36-Position Hybrid Cable Assembly Contact Information Charlie Staley Product Manager 512-984-4731 cstaley@mmm.com 3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronic Solutions Division Interconnect Products 6801 River Place Blvd. Austin, TX 78726-9000 1-800-225-5373 www.3Mconnectors.com (c) 3M 2014. All Rights Reserved. 78-5102-0195-3 Rev A Product Specification 3MTM Internal miniSAS HD to miniSAS 36P Hybrid Cable Assembly 3M Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3Mconnectors.com Document Number: 78-5102-0195-3 Rev A Title: Product Test Specification Subject: 3MTM Internal miniSAS HD to miniSAS 36P Hybrid Cable Assembly Issue Date: January 17, 2014 Supersedes: Page: 1 of 5 Table of Contents Section 1. 1.1. 2. 2.1. 3. Content Page Table of Contents 1 Scope 2 Content 2 Reference Documents 2 Commercial Standards, Specifications and Report Requirements 2 2 3.1. Design and Construction 2 3.2. Materials 2 3.3. Ratings 3 3.4. Performance and Test Description 3 3.5. Test Requirements and Procedures Summary 3 3M Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3Mconnectors.com (c) 3M 2014. All Rights Reserved. Document Number: 78-5102-0195-3 Rev A Title: Product Test Specification Subject: 3MTM Internal miniSAS HD to miniSAS 36P Hybrid Cable Assembly Issue Date: January 17, 2014 Supersedes: Page: 2 of 5 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the 3M Internal miniSAS HD to miniSAS 36P Hybrid Cable Assembly. 2. REFERENCE DOCUMENTS The following documents are referred to form a part of this specification. Unless otherwise specified, latest edition of the reference documents applies. In the event of conflict between requirements of the references and 3M specification, 3M specification shall take precedence. 2.1. Commercial standards, specifications and report 2.1.1. EIA-364 2.1.2. SAS 2 .1 and SAS 3.0 2.1.3. SFF-8643 2.1.4. SFF-8087 3. REQUIREMENTS 3.1. Design and Construction Product shall be of design, construction and physical dimensions specified on applicable product drawing. 3.2. Materials 3.2.1. Internal miniSAS HD 3.2.1.1. 3.2.1.2. 3.2.1.3. Housing Material Flammability Paddlecard Material Mating pad underplate Mating pad finish : FR4 : 1.27 m (50 ) Ni MIN : 0.76 m (30 ) Au MIN High Speed Ribbon Twin Axial Cable See related specification PS-0105 for ribbon 3MTM Twin Axial Ribbon Cable material information. 3M Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3Mconnectors.com : High Temperature Thermoplastic : UL94V-0 (c) 3M 2014. All Rights Reserved. Document Number: 78-5102-0195-3 Rev A Title: Product Test Specification Subject: 3MTM Internal miniSAS HD to miniSAS 36P Hybrid Cable Assembly Issue Date: January 17, 2014 Supersedes: Page: 3 of 5 3.2.2. Internal miniSAS 36P 3.2.2.1. 3.2.2.2. 3.2.2.3. 3.3. Housing Material Flammability : High Temperature Thermoplastic : UL94V-0 Paddlecard Material Mating pad underplate Mating pad finish : FR4 : 2.54 m (100 ) Ni MIN : 0.76 m (30 ) Au MIN High Speed Ribbon Twin Axial Cable See related specification PS-0079 for ribbon 3MTM Twin Axial Ribbon Cable material information. Ratings 3.3.1. Current rating: 0.5 A/contact 3.3.2. Operating temperature: 0oC to +80oC 3.4. Performance and Test Description Product is designed to meet electrical, mechanical and environmental performance requirements specified in section 3.5. All tests are performed at ambient environmental conditions per EIA-364 unless otherwise specified. 3.5. Test Requirements and Procedures Summary Test Description Visual examination Critical dimension measurement Test Condition Inspection of product for abnormality/defects. Measure dimensions specified in applicable product drawing. 3M Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3Mconnectors.com Requirement No visual defects Product shall meet requirements of applicable product drawing. (c) 3M 2014. All Rights Reserved. Document Number: 78-5102-0195-3 Rev A Title: Product Test Specification Subject: 3MTM Internal miniSAS HD to miniSAS 36P Hybrid Cable Assembly Test Description Issue Date: January 17, 2014 Supersedes: Page: 4 of 5 Test Condition Requirement ELECTRICAL Dielectric withstanding voltage Insulation resistance EIA-364-20, Method B Subject a voltage of 300 VDC for 1 minute at sea level between adjacent contacts of mated and unmated connector assemblies. EIA-364-21 Subject a voltage of 100 VDC for 1 minute between adjacent contacts of mated and unmated connector assemblies. No defect or breakdown between adjacent contacts. 1000 M minimum between adjacent contacts. MECHANICAL Mechanical shock EIA-364-27 No damage. 20 m maximum change from initial (baseline) contact resistance. Durability EIA-364-09 Perform 250 unplug/plug cycles. No evidence of physical damage. ENVIRONMENTAL Thermal shock EIA-364-32, Method A, Test Condition I -55C to +85C, 10 cycles, 1/2 hour at each temperature extreme. 20 m maximum change from intial (baseline) contact resistance. Vibration EIA-364-28, Test Condition VII, Test condition letter D 3.10G RMS between 20 and 500 Hz at 15 minutes in each of 3 mutually perpendicular directions. No damage. No discontinuity longer than 1sec allowed. 20 m maximum change from intial (baseline) contact resistance. For detailed electrical, mechanical and environmental test requirements and procedures, please refer the following documents: (i) (ii) Internal miniSAS HD Internal miniSAS 36P 3M Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3Mconnectors.com : 78-5102-0147-4 : PS-0082 (c) 3M 2014. All Rights Reserved. Document Number: 78-5102-0195-3 Rev A Title: Product Test Specification Subject: 3MTM Internal miniSAS HD to miniSAS 36P Hybrid Cable Assembly Issue Date: January 17, 2014 Supersedes: Page: 5 of 5 Unless otherwise noted, references to industry specifications are intended to indicate substantial compliance to the material elements of the specification. Such references should not be construed as a guarantee of compliance to all requirements in a given specification. Halogen-free is defined as both (1) no halogen compounds are intentionally added to the product or used in the manufacturing process for the product, and (2) any impurities present are less than 900 ppm bromine, less than 900 ppm chlorine, and/or less than 1500 ppm total bromine and chlorine. The latter are the levels set forth in certain industry standards for printed circuit boards, such as the International Electrotechnical Commission (IEC) 61249-2-21standard. "RoHS 2011/65/EU" means that the product or part does not contain any of the substances in excess of the maximum concentration values ("MCVs") in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This information represents 3M's knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. 3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3Mconnectors.com (c) 3M 2014. All Rights Reserved. 3M Authorized Distributor Stocking Package Information Author Date Product Family Where to locate in Catalog Description Paragraph L. Powell Product Manager Charlie Staley 31-Mar-14 3MTM Internal MiniSAS HD to Internal MiniSAS 36-Position Hybrid Cable Assembly, 8U Series * Cable Assemblies/Jumpers/Leads/Cascade Cables * Data Center/HPC Cabling New 3MTM Internal MiniSAS HD to Internal MiniSAS 36-Position Hybrid Cable Assembly features miniSAS HD (SFF-8643) on one end, and miniSAS 36-position (SFF8087) on the other. The assembly uses the popular 3MTM Twin Axial Cable SL8800 Series. 3M already offers symmetric assemblies using these SAS form factors. Hybrid assemblies allow integration of systems requiring connection from internal HD miniSAS to internal miniSAS. Customers may be trying to integrate newer and older equipment, or using some new equipment that has not adopted SFF-8643 as an interface. Both of these SFF standards are part of Serial Attached SCSI (SAS) 3.0, the latest version of the specification issued. Cable assemblies are available with or without sidebands. Bullets * Features miniSAS HD (SFF-8643) on one end, miniSAS 36-position (SFF-8087) on the other * High Bandwidth * Flexible * Made with the popular 3MTM Twin Axial Cable SL8800 Series * 100 ohms * SAS * Available with or without sidebands. Applications Server/Storage * HBAs (Host Bus Adapters) servers * Host system boards * Storage racks * Switches * Blades * Storage bridge bay * RAIDs (Redundant Array of Individual Disks) * JBODs (Just a Bunch of Disks) Computer Applications * Tower and rackmount computers * Workstations Digital Images http://gpimmediacollections.3m.com/index.php/3m/dmrweb?albumId=246576 International 3M Part Number 8UH4-BA113-00-1.00 3M Stock Number XP-2000-2380-0 UPC (11-digit) UPC (14-digit) 88877199924 35888771999244 Description TS Drawing (TS-XXXX) 3MTM Internal MiniSAS HD to Internal MiniSAS 78-5100-2622-8 36-Position Hybrid Cable Assembly, 8U Series BDP $ Start Up MOQ Start Up MOQ (Catalog) (Volume) 50 50 Re-Order MOQ Lead Time (Days) 500 60 Recommend ed Initial Buy Packaging Quatity (Carton) 50 1 Harmonize Code Parts per Bags/Trays/Tu Bag/Tray/Tu (Schedule B Export Code) bes Per Carton be 1 1 8544-42-2000 3M is a trademark of 3M Company. * "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based on information provided by third party suppliers to 3M. Important Notice Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability 3M's product warranty is stated in its Product Literature available upon request. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. ECCN Number Country of Origin Is Part STATIC Sensitive Is Part RoHS Compliant (Yes or No) Is Part LEAD(Pb) FREE Moisture Sensitivity Level (MSL) Is Dry Pack Required? Registerable (Yes or No) EAR99 USA N/A Yes Yes N/A No Yes 3M Authorized Distributor Stocking Package Information Author Date Product Family Where to locate in Catalog Description Paragraph L. Powell Product Manager Charlie Staley 1-Apr-14 3MTM Internal MiniSAS HD to Internal MiniSAS 36-Position Hybrid Cable Assembly, 8UH4 Series * Cable Assemblies/Jumpers/Leads/Cascade Cables * Data Center/HPC Cabling New 3MTM Internal MiniSAS HD to Internal MiniSAS 36-Position Hybrid Cable Assembly features miniSAS HD (SFF-8643) on one end, and miniSAS 36-position (SFF8087) on the other. The assembly uses the popular 3MTM Twin Axial Cable SL8800 Series. 3M already offers symmetric assemblies using these SAS form factors. Hybrid assemblies allow integration of systems requiring connection from internal HD miniSAS to internal miniSAS. Customers may be trying to integrate newer and older equipment, or using some new equipment that has not adopted SFF-8643 as an interface. Both of these SFF standards are part of Serial Attached SCSI (SAS) 3.0, the latest version of the specification issued. Cable assemblies are available with or without sidebands. Bullets * Features miniSAS HD (SFF-8643) on one end, miniSAS 36-position (SFF-8087) on the other * High Bandwidth * Flexible * Made with the popular 3MTM Twin Axial Cable SL8800 Series * 100 ohms * SAS * Available with or without sidebands. Applications Server/Storage * HBAs (Host Bus Adapters) servers * Host system boards * Storage racks * Switches * Blades * Storage bridge bay * RAIDs (Redundant Array of Individual Disks) * JBODs (Just a Bunch of Disks) Computer Applications * Tower and rackmount computers * Workstations Digital Images http://gpimmediacollections.3m.com/index.php/3m/dmrweb?albumId=282612 International 3M Part Number 8UH4-BA113-00-1.00 3M Stock Number XP-2000-2380-0 UPC (11-digit) UPC (14-digit) 88877199924 35888771999244 Description TS Drawing (TS-XXXX) 3MTM Internal MiniSAS HD to Internal MiniSAS 78-5100-2622-8 36-Position Hybrid Cable Assembly, 8U Series BDP $ Start Up MOQ Start Up MOQ (Catalog) (Volume) 50 50 Re-Order MOQ Lead Time (Days) 500 60 Recommend ed Initial Buy Packaging Quatity (Carton) 50 1 Harmonize Code Parts per Bags/Trays/Tu Bag/Tray/Tu (Schedule B Export Code) bes Per Carton be 1 1 8544-42-2000 3M is a trademark of 3M Company. * "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based on information provided by third party suppliers to 3M. Important Notice Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability 3M's product warranty is stated in its Product Literature available upon request. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. ECCN Number Country of Origin Is Part STATIC Sensitive Is Part RoHS Compliant (Yes or No) Is Part LEAD(Pb) FREE Moisture Sensitivity Level (MSL) Is Dry Pack Required? Registerable (Yes or No) EAR99 USA N/A Yes Yes N/A No Yes