tycao Electronics Specification Control Drawing Raychem a) Part as supplied to H DIA a a) Part as supplied 3.0 DIA. POTTING PORT 4.5 DIA. POTTING PORT SCRAP SECTION A-A DIMENSIONS , 22251%***_UP | J DIA JW - in millimetres in inches, for reference} AJ DIA y . P R 5 T V JO HW JW Xx Y Part No. Min Max Min Max +10% 410% +10% +10% 410% 410% +20% +20% 420% +20% a b a b b b b b b b D b b D 2225121%*-UP 0.45) O41) 0.35) 0201 aa) (0-88) (0.95) 612) (0.04 0.89) (0.06) (0.04 1) (0.63) 22251 32-%*-UP om) (0 se) om) 24) 80) ato) 079) 612) (0.04 0.67) (0.06) (0.04 om) 099) 2225142-x-UP (954) (0.71) (0-94) (0.58) 1-65) (1,22) (0/83) 10.12) (0.04 (0.71) (6.08) 10.04) (0.71) (0-79) 2225152--UP 44q) i588) (1-10) (0/33) (2701) (1,50) (1.02) (0-12) (0.04) (0.79) (0.08) (0,04 (0-88) (0-98) 2225163--UP 47%4o) (14) (1.42) (0.39) (2,64) (1-77) (118) (0-13) (0.07) 11-10) 10.09) (0,08) (0-98) 11-18) 2225174--UP 73a) 5m) 1273) (0.62) (315) (2773) (1742) 10-12) 10.07) (1792) 1-13) (0,08) (0-88) 1.77) This Specification is for UNPLATED parts. Copyright C!) The copyright in this drawing is the property of Tyco Electronics UK Ltd. The drawing is issued on the condition that it is not copied, reproduced or disclosed to a third party, either in whole or in part without the prior written consent of Tyco Electronics UK Ltd. Drawn A.LILLEY. Approval Design Checked MKTG. Issue Q.A. 2 Date December 2006 Conforms to ISO Recommendations 3rd Angle Projection Not to Scale mo Page 1 of 2 22257 XxX-UPPart Number Specification Raychem 222S1**-*-UP Issue 2 Control Drawing Iss. Date Eee. Details of Change Q. 2 |November 2006 | CROG-HM-012 Imperial dimensions added (Ordering Information) 2225 | K-X-UP/ XX Lsanorive Slash Number Cif required see compatibility chart) Modification number Material Dash Number (see compatibility chart) Base Part Number (COMPATIBILITY CHART) Material Dash Number| Material Description SPEC Number Coating Slash Number -4 POLYOLEFIN, FLEXIBLE RT-1304 RT-1050 /42_,/86, /180 =25 ELASTOMER, FLUID RESISTANT RT-1325, RK-6713 /42, /86, /225 =130 x = Z NOTES @ As supplied dimensions are for uncoated parts, when coating is added entry diameters will reduce by 1.5mm Max. @) Potting Ports are optional, when specified by suffix "-00" they will be Located as shown. Tyco Electronics UK Ltd. Tyco Electronics Corporation Faraday Road, 300, Constitution Drive, Swindon, Wiltshire, SN3 SHH Menlo Park, CA 94025 England USA Telephone: (01793) 528171 Fax: 572516 Telephone (650) 361-3860 Fax: (650) 361-5579 Cage Code K1010 Cage Code 060390 Page 2 of 2