FH62-35S-0.25SHW(99) - HIROSE ELECTRIC

2017.9②

0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector

FH62 Series

■Features

1． Space-saving design

・Space saving design with 0.25mm pitch, 4.0mm width.

(Fig.1)

2． Automatic single action lock design

・Easy to use single action lock design by simply

inserting FPC after mounting. (Fig.2) (Release the lock

by operating or opening the lock lever when removing

FPC.)

・Operation of the lock lever is not required at the time of

mating FPC.

Can be operated with one hand.

・Operation of the lock lever is not required at the time of

mating FPC.

Contributes to assembly time reduction.

・Operation of the lock lever is not required at the time of

mating FPC.

Lock lever will not be damaged by operation.

・Operation of the lock lever is not required at the time of

mating FPC.

No lever at insertion eliminates failures due to FPC

movement during locking.

3． High FPC retention force

・The notches on both sides of FPC are held by the lock

lever, generating a high FPC retention force in spite of

the small size. (Fig.3)

4． Easy FPC insertion

・Wide guide for easy FPC insertion easy. (Fig.1)

5． Supports 0.3mm-thick FPC

・The design accommodates a rigid 0.3mm-thick FPC,

which helps to prevent deformation of the FPC upon

insertion.

6． Supports high speed transmission

・Supports high speed transmission with excellent

impedance properties.

By making a differential pair with the same type of

contacts (even number-even number of contacts, odd

number-odd-number of contacts) excellent

transmission characteristics are achieved, supporting

eDP (ver1.4), MIPI (D-PHY) and USB3.0 standards.

(Fig.4)

7． Environmental

・Halogen free

*As defined by IEC 61249-2-21.

Br : 900ppm max, Cl : 900ppm max,

Br＋Cl : 1,500ppm max

High FPC retention force through the lock design

[FPC being inserted]

[FPC inserted]

Disengagement prevention!

130ps rise time (20-80%)

Supports high speed transmission (Differential impedance)

Fig.3

Fig.4

11.96mm (35 pos.)

1.1mm

4.0mm

0.9mm (width)

0.5mm (guide)

Dimension diagram : 35 pos.

Fig.1

[After mating]

Single action lock

Just insert it!

Fig.2

[Before mating]

In cases where the application will demand a high level of reliability, such as automotive,

please contact a company representative for further information.

Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector

Series name：FH

Series Ｎo．：62

Number of contacts ： 35

Contact pitch：0.25mm

Termination type

SHW・・・SMT Horizontal staggered

array mounting type

Specifications

(10)：Standard (5,000pcs/reel)

(99)：500pcs/reel

■Product Specifications

Rating

Rated current

0.25A

Operating temperature range

-55ç to +85°C (Note 1)

Storage temperature range

-10ç to +50°C (Note 2)

Rated voltage 30V AC/DC Operating humidity range

Relative humidity 90% max.

(No condensation)

Storage humidity range

Relative humidity 90% max.

(No condensation)

Adaptive FPC/FFC

contact specifications

Thickness : = 0.3±0.03mm Gold plated contact traces

Item Specification Conditions

Insulation resistance

50ø min. 100V DC

Withstanding voltage

No flashover or insulation breakdown 90V AC rms / 1 minute

3. Contact

resistance

100mø max.

* Including FPC conductor resistance 1mA (AC)

4. Durability

(insertion / withdrawal)

Contact resistance : 100mø max.

No damage, cracks, or parts dislocation 10 cycles

5. Vibration

No electrical discontinuity of 1µs or more

Contact resistance : 100mø max.

No damage, cracks, or parts dislocation

Frequency : 10 to 55Hz, single amplitude of 0.75mm,

10 cycles in each of the 3 directions

6. Shock

No electrical discontinuity of 1µs or more

Contact resistance : 100mø max.

No damage, cracks, or parts dislocation

Acceleration of 981m/s2, duration of 6ms, sine half-wave

waveform, 3 cycles in each of the 3 axes

7. Humidity

(Steady state)

Contact resistance : 100mø max.

Insulation resistance : 50Mø min.

No damage, cracks, or parts dislocation

96 hours at temperature of 40

and humidity of 90% to

95%

Temperature

cycle

Contact resistance : 100mø max.

Insulation resistance : 50Mø min.

No damage, cracks, or parts dislocation

Temperature: -55°C / +15ç to +35ç / +85ç / +15ç to +35ç

Time : 30 / 2 to 3 / 30 / 2 to 3 (Minutes)

5 cycles

9. Resistance to

soldering heat

No deformation of components affecting

performance

Reflow : See recommended temperature profile (Page 8)

Manual soldering: 350 ± 10°C for 5 seconds

Note 1 : Includes temperature rise caused by current flow.

Note 2 : The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range

and Humidity Range covers non-conducting condition of installed connectors in storage, shipment or during transportation.

■Materials / Finish

Part Material Color / Finish Remarks

Insulator LCP Beige UL94V-0

Polyamide Black

Contacts Copper alloy Gold plated ––––––

■Product Number Structure

Refer to the chart below when datermining the product specifications from the product number.

Please select from the product numbers listed in this catalog when placing orders.

FH 62 − 35S − 0.25 SHW (10)

❹❺❻

Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector

■Connector Dimensions

Units : mm

Part No. HRS No. No. of contacts A B C D E

FH62-13S-0.25SHW(**) Under planning (Note 1) 13 6.46 2.5 3 6 4.43

FH62-15S-0.25SHW(**) Under planning (Note 1) 15 6.96 3 3.5 6.5 4.93

FH62-17S-0.25SHW(**) Under planning (Note 1) 17 7.46 3.5 4 7 5.43

FH62-19S-0.25SHW(**) Under planning (Note 1) 19 7.96 4 4.5 7.5 5.93

FH62-21S-0.25SHW(**) Under planning (Note 1) 21 8.46 4.5 5 8 6.43

FH62-23S-0.25SHW(**) Under planning (Note 1) 23 8.96 5 5.5 8.5 6.93

FH62-25S-0.25SHW(**) Under planning (Note 1) 25 9.46 5.5 6 9 7.43

FH62-27S-0.25SHW(**) Under planning (Note 1) 27 9.96 6 6.5 9.5 7.93

FH62-31S-0.25SHW(**) Under planning (Note 1) 31 10.96 7 7.5 10.5 8.93

FH62-35S-0.25SHW(**) 580-4300-0 ** 35 11.96 8 8.5 11.5 9.93

FH62-39S-0.25SHW(**) Under planning (Note 1) 39 12.96 9 9.5 12.5 10.93

FH62-41S-0.25SHW(**) Under planning (Note 1) 41 13.46 9.5 10 13 11.43

FH62-51S-0.25SHW(**) Under planning (Note 1) 51 15.96 12 12.5 15.5 13.93

FH62-55S-0.25SHW(**) Under planning (Note 1) 55 16.96 13 13.5 16.5 14.93

FH62-61S-0.25SHW(**) Under planning (Note 1) 61 18.46 14.5 15 18 16.43

Note 1 : Contact positions without HRS No. are currently under planning.

Please contact hirose for detailed information about product variation.

Note

1 : The dimension in parentheses are for reference.

2 : Lead co-planarity including reinforced chucking metals shall be 0.1 max.

3 : To be delivered with tape and reel packages.

See the packaging specifications for details.

4 : Note that preventive hole for sink mark or slit could be added for improvement.

5 : The quality remains good, even with the dark spots, which could occasionally occur on molded plastic.

6 : This product satisfies halogen free requirements defined as 900ppm maximum chlorine,

900ppm maximum bromine, and 1500ppm maximum total of chlorine and bromine.

Figure-1 Shows the state of opened lock cover. FPC can be pulled out by opening the lock lever by 45 degrees or more.

7Figure -1

(180°)

Polarity mark

(Pickup area)

Number of contacts

Lot No.

HRS mark

Cavity No.

Connect

No.2

Contact

No.1

Position of the contact point Position of the contact pointLock lever tab

(3.69)

(2.05)

1.1±0.1

4 ±0.1

(0.34)

0.31±0.1

0.425±0.1 0.45±0.1

(0.68)

(1.25)

2.51±0.1

(2.6)

3.125±0.15

（FPC ： t＝0.3）

(0.8)

＊＊

(E)

1.015±0.1

(0.22)

0.5±0.1

B±0.15

3.71±0.1

0.29±0.1

A±0.15

0.5±0.1

C±0.15

D±0.15

(0.22)

(2.61)

(0.25)

Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector

0.02 Y

(n+1)/2×

×4

（Land pattern image）

(n-1)/2×

Recommended stencil thickness ： t=0.1

(0.3)

0.5

(0.25) B

0.6

C ±0.02

0.5

3.4±0.01

0.25 ±0.01

0.35 ±0.01

3.4±0.01 0.77±0.01

0.67±0.01

0.63±0.01

󱽧Recommended PCB Mounting Pattern

󱽧Recommended Stencil Pattern

Units : mm

Part No. HRS No. No. of contacts B C F

FH62-13S-0.25SHW(**) Under planning (Note 1) 13 2.5 3 6.1

FH62-15S-0.25SHW(**) Under planning (Note 1) 15 3 3.5 6.6

FH62-17S-0.25SHW(**) Under planning (Note 1) 17 3.5 4 7.1

FH62-19S-0.25SHW(**) Under planning (Note 1) 19 4 4.5 7.6

FH62-21S-0.25SHW(**) Under planning (Note 1) 21 4.5 5 8.1

FH62-23S-0.25SHW(**) Under planning (Note 1) 23 5 5.5 8.6

FH62-25S-0.25SHW(**) Under planning (Note 1) 25 5.5 6 9.1

FH62-27S-0.25SHW(**) Under planning (Note 1) 27 6 6.5 9.6

FH62-31S-0.25SHW(**) Under planning (Note 1) 31 7 7.5 10.6

FH62-35S-0.25SHW(**) 580-4300-0 ** 35 8 8.5 11.6

FH62-39S-0.25SHW(**) Under planning (Note 1) 39 9 9.5 12.6

FH62-41S-0.25SHW(**) Under planning (Note 1) 41 9.5 10 13.1

FH62-51S-0.25SHW(**) Under planning (Note 1) 51 12 12.5 15.6

FH62-55S-0.25SHW(**) Under planning (Note 1) 55 13 13.5 16.6

FH62-61S-0.25SHW(**) Under planning (Note 1) 61 14.5 15 18.1

Note 1 : Contact positions without HRS No. are currently under planning.

Please contact hirose for detailed information about product variation.

Contact No.2

Contact No.1

(n-1)/2×

×4

(n+1)/2×

（Connector image）

0.02 X

(0.175)

0.5

(0.25)

0.6

C ±0.02

0.5

0.8±0.02

0.8±0.02 2.8±0.02

0.3 ±0.02

0.4 ±0.02

0.3 ±0.02

0.8±0.02

2.8±0.02

Note 8 : 'n' shows the number of contacts.

󱽧

Recommended Dimensions of PCB Mounting Pattern and Stencil Pattern

Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector

󱽧

Diagram of a recommended FPC dimension (when using plated lead part)

󱽧Recommended FPC dimension (when not using plated lead part)

0.3±0.03

3.2±0.3 Stiffener

(FPC contact thickness : t=0.30±0.03)

0.02 X

(n-1)/2×

Contact No.1

Contact No.2

0.215±0.02

0.45±0.05

0.07±0.02

2.2±0.3

(exposed part of the conductor)

0.07±0.02

G±0.05

0.27±0.1

1.5±0.1

G±0.05

0.28±0.03

0.82±0.1

0.5±0.1

1.65±0.1

C±0.02

0.7±0.07

0.25

0.7±0.07

0.07±0.07

0.65±0.05

1.35±0.05

0.15±0.02

0.45±0.05

0±0.07

R0.2±0.05

R0.15±0.05

R0.2±0.05

(R0.1)

R0.15±0.05

R0.2±0.05

0.28±0.03

(n+1)/2×

0.02 Y

(n+1)/2×

(n-1)/2×

Contact No.1

Contact No.2

3.2±0.3 Stiffener

0.3±0.03

0.15±0.02

1.35±0.05

0.65±0.05

0±0.07

0.07±0.02

0.18±0.02

0.07±0.07

0.285±0.02

0.82±0.1

0.25 0.07±0.02

0.23±0.1

0.5±0.1

0.27±0.1

1.65±0.1

1.5±0.1

0.82±0.1

C±0.02

0.28±0.03

0.43±0.03

G±0.05

0.7

±0.07

0.7±0.07

G±0.05

0.15±0.02

0.45±0.05

0.4±0.02

R0.2±0.05

R0.15±0.05

R0.2±0.05

(R0.1)

2.2±0.3

(exposed part of the conductor)

(FPC contact thickness : t=0.30±0.03)

Note

Dimension R must be 0.5mm minimum.

Indicated tolerance is applicable to the exposed conductor.

Both end sides of contact pad on FPC cannot be used for signal transmission.

Note

Dimension R must be 0.5mm minimum.

Indicated tolerance is applicable to the exposed conductor.

Both end sides of contact pad on FPC cannot be used for signal transmission.

Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector

󱽧Recommended FPC Dimensions Units : mm

Part No. HRS No. No. of contacts B C G

FH62-13S-0.25SHW(**) Under planning (Note 1) 13 2.5 3 4.4

FH62-15S-0.25SHW(**) Under planning (Note 1) 15 3 3.5 4.9

FH62-17S-0.25SHW(**) Under planning (Note 1) 17 3.5 4 5.4

FH62-19S-0.25SHW(**) Under planning (Note 1) 19 4 4.5 5.9

FH62-21S-0.25SHW(**) Under planning (Note 1) 21 4.5 5 6.4

FH62-23S-0.25SHW(**) Under planning (Note 1) 23 5 5.5 6.9

FH62-25S-0.25SHW(**) Under planning (Note 1) 25 5.5 6 7.4

FH62-27S-0.25SHW(**) Under planning (Note 1) 27 6 6.5 7.9

FH62-31S-0.25SHW(**) Under planning (Note 1) 31 7 7.5 8.9

FH62-35S-0.25SHW(**) 580-4300-0 ** 35 8 8.5 9.9

FH62-39S-0.25SHW(**) Under planning (Note 1) 39 9 9.5 10.9

FH62-41S-0.25SHW(**) Under planning (Note 1) 41 9.5 10 11.4

FH62-51S-0.25SHW(**) Under planning (Note 1) 51 12 12.5 13.9

FH62-55S-0.25SHW(**) Under planning (Note 1) 55 13 13.5 14.9

FH62-61S-0.25SHW(**) Under planning (Note 1) 61 14.5 15 16.4

Note 1 : Contact positions without HRS No. are currently under planning.

Please contact hirose for detailed information about product variation.

MATERIAL NAME

MATERIAL

THICKNESS (μm)

Covering film layer

Polyimide 1mil 25

Cover adhesive 25

Surface

treatment

1μm to 6μm nickel underplated

0.2

μm gold plated

（4）

Copper foil Cu 1oz 35

Base adhesive Heat-hardened adhesive 25

Base film Polyimide 1mil 25

Reinforcement

material adhesive

Heat-hardened adhesive 35

Stiffener Polyimide 7mil 175

󱽧FPC Construction (Recommended Specifications)

3. Caution

1.

Material composition of FPC is a reference example. Please adjust the thickness of the FPC mating section

to 0.3±0.03mm in reference to the material composition.



For the details of the material composition, please contact each FPC manufacturer.

Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector

CL Direction of unreeling

(2)

4±0.1

8±0.1

1.75±0.1

M±0.1

K+0.3

-0.1

Ø1.5

＋0.1

(1.35)

(0.3)

1.7＋0.15

1.5＋0.1

Ø1.5

＋0.1

(0.3)

(1.35)

L±0.1

K±0.3

M±0.1 1.75±0.1

(2)

4±0.1

8±0.1

󱽧Packaging Specifications

Direction of

unreeling

（N ： Reel inner width）

（P ： Reel outer width）

(Ø80)

(Ø380)

（Ø13）

Direction of unreeling

Top cover tape

Embossed carrier tape

400mm MIN （Leader）

160mm MIN

（Trailer, empty components）

100mm MIN

（empty components）

●Embossed Carrier Tape Dimensions

(Tape width up to 24mm)

●Embossed Carrier Tape Dimensions

(Tape width 32mm and over)

●Reel Dimensions ●Leader, Trailer Dimensions

Units : mm

Part No. HRS No. No. of contacts K L M N P

FH62-13S-0.25SHW(**) Under planning (Note 1) 13 16 - 7.5 17.4 21.4

FH62-15S-0.25SHW(**) Under planning (Note 1) 15

24 - 11.5 25.4 29.4

FH62-17S-0.25SHW(**) Under planning (Note 1) 17

FH62-19S-0.25SHW(**) Under planning (Note 1) 19

FH62-21S-0.25SHW(**) Under planning (Note 1) 21

FH62-23S-0.25SHW(**) Under planning (Note 1) 23

FH62-25S-0.25SHW(**) Under planning (Note 1) 25

FH62-27S-0.25SHW(**) Under planning (Note 1) 27

FH62-31S-0.25SHW(**) Under planning (Note 1) 31

FH62-35S-0.25SHW(**) 580-4300-0 ** 35

FH62-39S-0.25SHW(**) Under planning (Note 1) 39

FH62-41S-0.25SHW(**) Under planning (Note 1) 41

FH62-51S-0.25SHW(**) Under planning (Note 1) 51

32 28.4 14.2 33.4 37.4FH62-55S-0.25SHW(**) Under planning (Note 1) 55

FH62-61S-0.25SHW(**) Under planning (Note 1) 61

Note 1 : Contact positions without HRS No. are currently under planning.

Please contact hirose for detailed information about product variation.

Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector

󱽧Temperature Profile

MAX 250℃

Start

Time （sec.）

25℃60 to 90 sec.

20 to 40

sec.

120±5 sec.

Preheating time Soldering time

Peak temperature

100

150 150℃

180℃

220℃

200

245

Temperature （℃）

Applicable Conditions

Reflow method : IR/Hot air

Reflow environment : Room air

Solder : Paste type Sn/3.0Ag/0.5Cu

(M705-GRN360-K2-V made by Senju

Metal Industry Co.)

Test PCB : PCB material and size

Glass epoxy 32.85×18.3×0.8mm

Land size, per recommended on page 4.

Metal mask : Thickness and opening size

Per recommended on page 4.

This temperature profile is based on the above conditions.

It may vastly depending on solder paste type, manufacturer,

PCB size and mounting materials. Please use only after

checking the mounting conditions.

Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector

󱽧Connector operation and points to note

[Operation method]

As this connector is a small-sized, thin product, care needs to be taken when handling.

Please check the following before use.

1. Initial condition

❶The product is delivered with the lock lever closed, you do not need to operate it except for when removing

the FPC.

2. How to insert FPC

❶Insert FPC with the conductor surface facing upwards, horizontal to the board surface.

[Caution]

・During FPC insertion, do not twist the FPC to up and down, right and left or an angle. It may cause

deformation of the contacts and contact failure.

3. Check the inserted state of FPC

When FPC is completely inserted, visually inspect the status.

The outer shapes of FPC and the lock lever are

parallel and inserted to the end.

FPC is not inserted deep enough. FPC is inserted diagonally.

FPC diagonal

Lock lever (open)

FPC (diagonal)

Lock lever (closed)



FPC (horizontal)

Lock lever (closed)

FPC (horizontal)

OK NG NG

NGNGNG

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector

󱽧Connector operation and points to note

[Operation method]

4.How to remove FPC

❶Push up the lock lever slowly, and release the lock.

[Caution]

・The lock lever can't be opened over 180°.

・After releasing the lock lever, do not touch the contact.

・Do not raise, pull, or twist the lock lever.

❷After releasing the lock lever, remove the FPC in the horizontal direction.

❸After remove of the FPC, close the lock lever.

[Caution]

・Do not pull out FPC while the lock lever is not opened to 45° or more.

・Ensure both ends of the lock lever are closed.

45° or more

Lock lever (open)

Close the both ends of

the lock lever.

FPC diagonal

45°

FPC can be removed without letting

the lock lever interfere with FPC.

Rotational axis

Load is concentrated

on the rotation axis,

and leads to breakage.

180°

Excessive load is

applied to the lock lever.

Do not touch the contact.

NG NG

OK OK

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector

[Cautions when Mounting PCB]

SWarp of PCB

Minimize warp of the PCB as much as possible.

Lead co-planarity including reinforced metals is 0.1mm or less.

Too much wrap of the PCB may result in a soldering failure.

SFlexible board design

Please make sure to put a stiffener on the backside of the flexible board.

We recommend a glass epoxy material with the thickness of 0.3mm MIN.

SLoad to Connector

Do not add 1.0N or greater external force when unreel or pick and place the connector etc,

or it may get broken.

In addition, do not insert the FPC or operate the connector before mounting.

SLoad to PCB

• Splitting a large PCB into several pieces

• Screwing the PCB

Avoid the handling described above so that no force is

exerted on the PCB during the assembly process.

Otherwise, the connector may become defective.

SInstructions on manual soldering

Follow the instructions shown below when soldering

the connector manually during work, etc.

❶Do not perform any reflow or hand soldering operation while FPC is inserted in the connector.

❷Do not apply extreme heat, or allow the soldering iron to touch anything other than the connector lead.

This could cause the connector to be deformed or melted.

❸Do not supply excessive solder (flux).

If excessive solder (flux) is applied to the contact, the solder or flux could adhere on the contact point and

cause contact failure.

Connector

FPC

(for mounting connector)

󱽧Connector operation and points to note

[Operation methods]

5. FPC routing after connection

qDepending on a FPC rounding, a load is applied to connector, and a contact failure may occur.

To prevent a failure, take the following notes into a consideration during mechanism design.

[Caution]

• Make sure that FPC and stiffener do not contact chassis.

• Avoid applying forces to FPC in vertical or horizontal directions.

In addition, avoid pulling up and down on the FPC.

• When fixing FPC after FPC cabling, avoid pulling FPC, and route the wire FPC with slack.

In this regard, the stiffener is parallel to the PCB.

• Do not mount other components touching to the FPC underneath the FPC stiffener.

Stiffener

The state where a load is applied to FPC Mounting parts interfer with FPC

Stiffener

The state where a load is applied to FPC

OK NG NG NG

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 09/2017. Contents are subject to change without notice for the purpose of improvements.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: +81-45-620-3526 Fax: +81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

USA:

HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE

2841 Junction Ave, Suite 200

San Jose, CA. 95134

Phone : +1-408-253-9640

Fax : +1-408-253-9641

http://www.hirose.com/us/

USA:

HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)

17197 N. Laurel Park Drive, Suite 253,

Livonia, MI 48152

Phone : +1-734-542-9963

Fax : +1-734-542-9964

http://www.hirose.com/us/

USA:

HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE

300 Brickstone Square Suite 201,

Andover, MA 01810

Phone : +1-978-662-5255

USA:

HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE

2300 Warrenville Road, Suite 150,

Downers Grove, IL 60515

Phone : +1-630-282-6700

http://www.hirose.com/us/

CHINA:

HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.

Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,

5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008

Phone : +86-755-8207-0851

Fax : +86-755-8207-0873

http://www.hirose.com/cn/

KOREA:

HIROSE KOREA CO.,LTD.

143, Gongdan 1-daero, Siheung-si,

Gyeonggi-do, 15084, Korea

Phone : +82-31-496-7000

Fax : +82-31-496-7100

http://www.hirose.co.kr/

GERMANY:

HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE

Neumeyerstrasse 22-26, 90411 Nurnberg

Phone : +49-911 32 68 89 63

Fax : +49-911 32 68 89 69

http://www.hirose.com/eu/

GERMANY:

HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE

Bayernstr. 3, Haus C 30855 Langenhagen, Germany

Phone : +49-511 97 82 61 30

Fax : +49-511 97 82 61 35

http://www.hirose.com/eu/

GERMANY:

HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH

Schoenbergstr. 20, 73760 ostfildern

Phone : +49-711-456002-1

Fax : +49-711-456002-299

http://www.hirose.com/eu/

FRANCE:

HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE

130 Avenue Joseph Kessel, Bat E, 78960

Voisins le Bretonneux, France

Phone : +33-1-85764886

Fax : +33-1-85764823

http://www.hirose.com/eu/

THE NETHERLANDS:

HIROSE ELECTRIC EUROPE B.V.

Hogehillweg #8 1101 CC Amsterdam Z-O

Phone : +31-20-6557460

Fax : +31-20-6557469

http://www.hirose.com/eu/

UNITED KINGDOM:

HIROSE ELECTRIC EUROPE BV (UK BRANCH)

4 Newton Court, Kelvin Drive, Knowlhill,

Milton Keynes, MK5 8NH

Phone : +44-1908 202050

Fax : +44-1908 202058

http://www.hirose.com/eu/

CHINA:

HIROSE ELECTRIC (SHANGHAI) CO., LTD.

18, Enterprise Center Tower 2, 209# Gong He

Road, Jing’an District, Shanghai, CHINA 200070

Phone : +86-21-6391-3355

Fax : +86-21-6391-3335

http://www.hirose.com/cn/

CHINA:

HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH

A1001, Ocean International Center, Building 56# East 4th

Ring Middle Road, ChaoYang District, Beijing, 100025

Phone : +86-10-5165-9332

Fax : +86-10-5908-1381

http://www.hirose.com/cn/

TAIWAN:

HIROSE ELECTRIC TAIWAN CO., LTD.

103 8F, No.87, Zhengzhou Rd., Taipei

Phone : +886-2-2555-7377

Fax : +886-2-2555-7350

http://www.hirose.com/tw/

HONG KONG:

HIROSE ELECTRIC HONGKONG TRADING CO., LTD.

Room 1001, West Wing, Tsim Sha Tsui Centre, 66

Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong

Phone : +852-2803-5338

Fax : +852-2591-6560

http://www.hirose.com/hk/

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE

Office NO.552, Regus-Green Boulevard, Level5, Tower C,

Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India

Phone : +91-12-660-8018

Fax : +91-120-4804949

http://www.hirose.com/sg/

SINGAPORE:

HIROSE ELECTRIC SINGAPORE PTE. LTD.

03, Anson Road, #20-01, Springleaf Tower,

Singapore 079909

Phone : +65-6324-6113

Fax : +65-6324-6123

http://www.hirose.com/sg/

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE

Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma

Gandhi (MG) Road, Bangalore 560 001, Karnataka, India

Phone : +91-80-4120 1907

Fax : +91-80-4120 9908

http://www.hirose.com/sg/

MALAYSIA:

PENANG REPRESENTATIVE OFFICE

73-3-1, Ideal@The One, Jalan Mahsuri, Bayan

Lepas Penang, 11950, Malaysia

Phone : +604-648-5536

http://www.hirose.com/sg/

THAILAND:

BANGKOK OFFICE (REPRESENTATIVE OFFICE)

Unit 4703, 47th FL., 1 Empire Tower, South Sathorn

Road, Yannawa, Sathorn, Bangkok 10120 Thailand

Phone : +66-2-686-1255

Fax : +66-2-686-3433

http://www.hirose.com/sg/