Data Sheet Telaris ISO-PRO Insulation Tester The Telaris ISO-PRO tests insulation resistance of electrical circuit mains lines to earth ground and mains neutral to earth ground. Insulation measurement Low Ohm measurement Voltage measurement Integrated memory for approx. 500 measurement values Standard, built-in IR RS-232 interface for transferring measurement data to the PC Software control for recording test results is available as option Pre-setable limit values for insulation measurement No hassle warranty No waiting. No shipping charges. Our commitment to high-quality products and customer service is demonstrated by our industry exclusive "No Hassle" warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot. Test lead compensation function for exact zero adjustment Additional analogue bargraph for insulation measurement Clear and large digital display provides the user with an optimum visual indication of both test values and limits Backlight Auto power off Adjustable measurement value timer allows measurements over a longer time period Test of trip voltage of overvoltage protection devices Insulation measurement of floor and wall resistance (note: $500 MSLP limit) 600V Amprobe(R) Test Tools www.Amprobe.com Telaris ISO-PRO Insulation Tester Data Sheet Specifications Display Insulation Resistance/ Resolution Insulation Test Voltage / Current Timer Function Voltage Protection level Voltage Measurement/ Resolution Low Ohm Measurement / Resolution Low Ohms Test Current Memory Safety Compliance Overvoltage category Pollution Degree Power Supply Dimensions Weight LCD, 31/2 digit, 1999 Count with Bargraph 0.005 to 1.999 M / 1k 2 to 19.99 M / 10k 20 to 199.9 M / 100k 200 to 1999 M / 1M 100/250/500/1000 V DC / < 2 mA 0, 10, 30, 180 s (selectable) 10 to 1000 V DC, 6 to 625 V AC / 0 to 1000 V DC 0 to 600 V AC; 0 to 600 VDC / 1 V 0.03 to 19.99 / 0.01 > 200mA approx. 500 Values IEC 61010/EN 61010/DIN VDE 0411/IEC 61557/EN61557/DIN VDE 0413 CAT III/600 V 2 6 x 1.5 V, IEC LR6 235 x 105 x 70 mm approx. 660 g Amprobe(R) Test Tools website: www.Amprobe.com email: info@amprobe.com Everett, WA 98203 Tel: 877-AMPROBE Amprobe(R) Test Tools Amprobe(R) Test Tools Europe Amprobe Test Tools Europe Beha-Amprobe GmbH In den Engematten 14 79286 Glottertal, Germany Tel.: +49 (0) 7684 8009 - 0 (c)2008 Amprobe Test Tools. All rights reserved. 10/2008 3393526 Rev A www.Amprobe.com