CUSTOMER DRAWING Product Name Prod. Rev. D-150-1004 D-150-1005 D-150-1006 D-150-1007 D-150-1008 D-150-1009 D-150-1010 D-150-1011 D-150-1013 D-150-1014 D-150-1016 A A A A A A A A A A A I.D. min 10.0 (0.390) 11.3 (0.445) 13.5 (0.530) 15.0 (0.590) 16.5 (0.650) 18.0 (0.710) 20.0 (0.790) 23.0 (0.905) 26.0 (1.020) 30.0 (1.180) 35.5 (1.400) Splice Dimensions L2 L11.0 Ref. (L10.04) 10.0 (0.390) 34.0 (1.350) 14.0 (0.550) 46.0 (1.800) 14.0 (0.550) 46.0 (1.800) 14.0 (0.550) 46.0 (1.800) 14.0 (0.550) 46.0 (1.800) 16.0 (0.630) 60.0 (2.360) 16.0 (0.630) 60.0 (2.360) 16.0 (0.630) 60.0 (2.360) 16.0 (0.630) 60.0 (2.360) 20.0 (0.790) 72.0 (2.830) 20.0 (0.790) 75.0 (2.950) Usable Assembly Diameters Shield Overlap Cable Jacket Cable max min max 9.0 (0.355) 4.0 (0.155) 10.0 (0.390) 10.7 (0.420) 5.0 (0.195) 11.3 (0.445) 12.5 (0.490) 6.0 (0.235) 13.5 (0.530) 14.0 (0.550) 7.0 (0.275) 15.0 (0.590) 15.5 (0.610) 8.0 (0.315) 16.5 (0.650) 17.0 (0.670) 9.0 (0.355) 18.0 (0.710) 19.0 (0.750) 10.0 (0.390) 20.0 (0.790) 22.0 (0.865) 11.5 (0.450) 23.0 (0.905) 25.0 (0.985) 14.5 (0.570) 26.0 (1.020) 28.6 (1.125) 18.5 (0.725) 30.0 (1.180) 34.4 (1.355) 19.5 (0.765) 35.5 (1.400) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, translucent natural, radiation cross-linked thermoplastic, polyolefin. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI/J-STD-006. FLUX: TYPE ROM1 per ANSI/J-STD-004. 3. SHIELD: Solder impregnated, flux coated copper wire braid. SOLDER: TYPE Sn63 per ANSI/J-STD-006. FLUX: TYPE ROM1 per ANSI/J-STD-004 APPLICATION 1. These parts are designed to make a termination between the shield of a Tyco Electronics backshell adapter and the shield of a cable. 2. Parts may be installed with convection (hot-air) heaters. 3. Temperature Range: -55 C to +135 C. Raychem Devices TITLE: SOLDERSHIELD SPLICE DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] D-150-10XX DOC. ISSUE: ROUGHNESS IN MICRON TE Connectivity reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. CAGE CODE: 06090 REPLACES: D030303 PROD. REV.: SEE TABLE TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A ANGLES: N/A DRAWN BY: M. FORONDA ECO NUMBER: ECO-18-016166 (c) 2018 TE Connectivity Corporation. All Rights Reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. DATE: D1 11-OCT-2018 SCALE: None SIZE: A SHEET: 1 of 1