http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design.
2009.1.8
Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr LC Combined Type
12.0±0.2
8.0±0.5
4.0±0.5
2.5±0.2
0.6
±0.1
ø0.8
±0.1 ø0.8
±0.1
0.8
±0.1
0.8
±0.1
2.5±0.2
7.5±0.2
11.0±0.2
12.0±0.5
3.2±0.5
BNX***
*** : 012/016
(in mm)
PSG: Power supply ground
CG: Load circuit ground
CB: Load circuit + Bias
CG
CB
CG
B
PSG
90
80
70
60
50
40
30
20
10
0
0.001 0.01 0.1 1 10 100 1000
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
BNX012-01
BNX016-01
L2
C2
L1 L3
C1
B
PSG
CB
CG
(1)-(4): Terminal Number
PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B
(1) (2)
(3) (4)
Block Type EMIFILr LC Combined Type
BNX01* Series
■ Dimensions ■ Insertion Loss Characteristics
■ Equivalent Circuit ■ Packaging
Code Packaging Minimum Quantity
-Box 150
■ Rated Value
Part Number Rated Voltage Withstand Voltage Rated Current Insulation Resistance(min.) Insertion Loss
BNX012-01
50Vdc 125Vdc 15A 500M ohm 1MHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm)
BNX016-01
25Vdc 62.5Vdc 15A 50M ohm 100kHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm)
Operating Temperature Range: -40°C to 125°C
In operating temperatures exceeding +85°C, derating of current is necessary.
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design.
2009.1.8
" Rating
In operating temperatures exceeding +85°C, derating of
current is necessary for BNX01p series. Please apply the
derating curve shown in chart according to the operating
temperature.
15
10
5
0
1
85-40 125102.5 120
Operating Temperature [°C]
Derated Current [A]
Derating
" Connecting ± power line
In case of using ± power line, please connect to each
terminal as shown.
Power Supply
(BNX Input) CircuitBNX
PSG
BCG
CB
PSG
BCG
CB
Power Supply Ground
Power Supply +Bias
Power Supply Ground
Power Supply -Bias
(BNX Output)
Load Circuit Ground
Load Circuit +Bias
Load Circuit Ground
Load Circuit -Bias
Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr LC Combined Type
■ Notice (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
■ !Caution (Rating)
