Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057
800.411.6596 / http://www.anaren.com / AIR@anaren.com
The A1101R04C-EZ4x is a target board assembly
with the Anaren A1101R04C radio module in the
industry’s smallest package (9 x 12 x 2.5mm)
mounted on it.
This module is fully compliant with Texas
Instruments eZ430-RF2500 Development Kit, and
plugs directly into either the battery board or USB
debugging interface via the 6 pin header. It is
designed to be a direct-replacement for the
access point and end point target board modules
included with the Texas Instrument eZ430-
RF2500 Development Kit. Each Anaren
A1101R04C Radio Module is ETSI compliant, and
incorporates the Texas Instruments CC1101
transceiver chip.
As a stand-alone module for your final design
implementation, Anaren’s A1101R04C has an
LGA pad footprint with an industry-standard U.FL
A1101R04C-EZ4x
The A1101R04C-EZ4x is a high-performance demonstration platform, designed to
showcase Anaren's family of ETSI-compliant AIR modules. It features an
A1101R04C AIR 433 MHz connectorized module, and is designed to quickly
connect to the Texas Instruments eZ430 Development Kit battery board or USB
debugging interface
EZ4x Module Series
Product Overview
Layout
button connector receptacle. This module is
designed to effortlessly integrate into a wide range
of applications, including: industrial control, building
automation, low-power wireless sensor networks,
lighting control, and automated meter reading.
Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057
800.411.6596 / http://www.anaren.com / AIR@anaren.com
Pin Diagram Nomenclature
A (Anaren)
1 Chip series (C1101, CC110L, CC2500)
2 Function (R = radio only)
3 Frequency band (x100MHz)
4 Form factor (A = Internal Antenna, C = Connector)
5 Module Type (EM1 = Eval Module, EZ4x = EZ-430
Module, LPF = BoosterPack)
6 Firmware (EZ4 only) (A = Access Point, E = End Point,
X = Custom (or no firmware)
1208a
Caution! ESD sensitive device. Precautions
should be used when handling the device in
order to prevent permanent damage.
PLEASE NOTE: Additional information on the Texas Instruments
CC1101 Development Kit can be found in the company’s latest datasheet
release at http://www.ti.com
Battery / USB:
ST1 P3.4 / UCA0TXD / UCA0SIMO
ST2 GND
ST3 RST / SBWTDIO
ST4 TEST / SBWTCK
ST5 VCC (3.6V)
ST6 P3.5 / UCA0RXD / UCA0SOMI
Interface:
P1 GND
P2 VCC
P3 P2.0 / ACLK / A0 / OA0I0
P4 P2.1 / TAINCLK / SMCLK / A1 /A0O
P5 P2.2 / TA0 / A2 / OA0I1
P6 P2.3 / TA1 / A3 / VREF– / VeREF–/ OA1I1 / OA1O
P7 P2.4 / TA2 / A4 / VREF+ / VeREF+/ OA1I0
P8 P4.3 / TB0 / A12 / OA0O
P9 P4.4 / TB1 / A13 / OA1O
P10 P4.5 / TB2 / A14 / OA0I3
P11 P4.6 / TBOUTH / A15 / OA1I3
P12 GND
P13 P2.6 / XIN (GDO0)
P14 P2.7 / XOUT (GDO2)
P15 P3.2 / UCB0SOMI / UCB0SCL
P16 P3.3 / UCB0CLK / UCA0STE
P17 P3.0 / UCB0STE / UCA0CLK / A5
P18 P3.1 / UCB0SIMO / UCB0SDA
EZ4x Connections
To view the entire available family of AIR Modules &
Development options, please visit our website at:
http://www.anaren.com/air
This product is not to be used in any implantable medical device or external
medical device intended to regulate or monitor biological functions, including but
not limited to devices such as pacemakers, defibrillators, cardiac
resynchronization devices, pressure sensors, biochemical stimulators and
neurostimulators. ANAREN MAKES NO WARRANTY OF FITNESS OR
MERCHANTABILITY OF THIS PRODUCT FOR ANY USE OF THIS TYPE.
Anaren shall not be responsible for any consequential damages arising from the
sale or use of this product for any use of this type. The ultimate user of the
product assumes all risk of personal injury or death arising from a prohibited use.
