IH
www.vishay.com Vishay Dale
Revision: 08-Aug-14 1Document Number: 34013
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Filter Inductors, High Current, Radial Leaded
ELECTRICAL SPECIFICATIONS
Inductance: Measured at 1.0 V with zero DC current
Incremental Current: The typical current at which the
inductance will be decreased by 5 % from its initial zero DC
value
Operating Temperature: -55 °C to +125 °C (no load),
-55 °C to +75 °C (at full rated current)
FEATURES
• Printed circuit mounting
• Pre-tinned leads
• Protected by polyolefin tubing - flame retardant
UL type VW-1 per MIL-I-23053/5, class 3
requirements
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Noise filtering for switching regulators, power amplifiers,
power supplies and SCR and Triac control circuits
Current Rating: Maximum continuous operating current
(DC or RMS) based on a 50 °C temperature rise
MECHANICAL SPECIFICATIONS
Wire: Solid soft copper
Terminals: Extensions of the winding
Core Material: Ferrite
Coating: Polyolefin tubing
DIMENSIONS in inches [millimeters]
MODEL IND. (μH) A (MAX.) B (MAX.) C ± 0.062 [± 1.57] D ± 0.005 [± 0.127]
IH-3 5 0.875 [22.23] 0.600 [15.24] 0.500 [12.70] 0.042 [1.067]
IH-3 10 1.125 [28.58] 0.625 [15.88] 0.687 [17.45] 0.042 [1.067]
IH-3 27 0.875 [22.23] 0.800 [20.32] 0.437 [11.10] 0.042 [1.067]
IH-3 50 0.875 [22.23] 0.800 [20.32] 0.750 [19.05] 0.042 [1.067]
IH-3 100 1.125 [28.58] 0.800 [20.32] 0.937 [23.80] 0.042 [1.067]
IH-3 150 1.375 [34.93] 0.800 [20.32] 1.062 [26.97] 0.042 [1.067]
IH-3 250 1.625 [41.28] 0.800 [20.32] 1.312 [33.32] 0.042 [1.067]
IH-5 5 0.875 [22.23] 0.625 [15.88] 0.750 [19.05] 0.053 [1.35]
IH-5 10 1.125 [28.58] 0.625 [15.88] 1.000 [25.40] 0.053 [1.35]
IH-5 27 0.875 [22.23] 0.840 [21.34] 0.562 [14.27] 0.053 [1.35]
IH-5 50 1.125 [28.58] 0.840 [21.34] 0.750 [19.05] 0.053 [1.35]
IH-5 68 1.125 [28.58] 0.860 [21.84] 0.875 [22.23] 0.053 [1.35]
IH-5 100 1.375 [34.93] 0.860 [21.84] 1.000 [25.40] 0.053 [1.35]
IH-5 150 1.625 [41.28] 0.860 [21.84] 1.250 [31.75] 0.053 [1.35]
IH-10 5 1.125 [28.58] 0.635 [16.13] 0.812 [20.62] 0.065 [1.65]
IH-10 10 1.375 [34.93] 0.635 [16.13] 1.218 [30.94] 0.065 [1.65]
IH-10 27 1.125 [28.58] 0.935 [23.75] 0.687 [17.45] 0.065 [1.65]
IH-10 50 1.375 [34.93] 0.935 [23.75] 0.937 [23.80] 0.065 [1.65]
IH-10 68 1.375 [34.93] 0.935 [23.75] 1.125 [28.58] 0.065 [1.65]
IH-10 100 1.625 [41.28] 0.935 [23.75] 1.312 [33.32] 0.065 [1.65]
IH-15 5 1.375 [34.93] 0.700 [17.78] 0.937 [23.80] 0.082 [2.08]
IH-15 10 1.687 [42.85] 0.700 [17.78] 1.500 [38.10] 0.082 [2.08]
IH-15 27 1.375 [34.93] 1.000 [25.40] 0.937 [23.80] 0.082 [2.08]
IH-15 50 1.625 [41.28] 1.000 [25.40] 1.125 [28.58] 0.082 [2.08]
B
1.0 ± 0.125
[25.40 ± 3.18]
C
D
Leads tinned
to within
0.125 [3.18]
A
Schematic
IH
www.vishay.com Vishay Dale
Revision: 08-Aug-14 2Document Number: 34013
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IND. AT 1 kHz
(μH)
TOL.
(%)
DCR MAX.
()
RATED DC CURRENT
(mA)
INCREMENTAL CURRENT
(mA)
IH-3 5 ± 10 0.015 10 000 25 000
IH-3 10 ± 10 0.018 9000 19 000
IH-3 27 ± 10 0.035 7000 12 000
IH-3 50 ± 10 0.050 5600 8000
IH-3 100 ± 10 0.065 5200 6000
IH-3 150 ± 10 0.075 5000 5000
IH-3 250 ± 10 0.090 5000 4000
IH-5 5 ± 10 0.012 14 000 25 000
IH-5 10 ± 10 0.015 12 000 19 000
IH-5 27 ± 10 0.025 9000 13 000
IH-5 50 ± 10 0.030 8000 10 000
IH-5 68 ± 10 0.035 7500 9000
IH-5 100 ± 10 0.050 7500 7000
IH-5 150 ± 10 0.060 7000 5000
IH-10 5 ± 10 0.010 19 000 25 000
IH-10 10 ± 10 0.012 16 000 19 000
IH-10 27 ± 10 0.018 12 500 12 000
IH-10 50 ± 10 0.025 11 000 10 000
IH-10 68 ± 10 0.027 10 000 8000
IH-10 100 ± 10 0.030 10 000 7000
IH-15 5 ± 10 0.008 24 000 25 000
IH-15 10 ± 10 0.010 20 000 19 000
IH-15 27 ± 10 0.015 16 000 14 000
IH-15 50 ± 10 0.020 15 000 10 000
MARKING
- Vishay Dale
- Model
- Inductance value
- Date code
ORDERING INFORMATION
IH-5 10 μH ± 10 % EB e2
MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC® LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
IH05 EB 100 K
MODEL PACKAGE
CODE
INDUCTANCE
VALUE
INDUCTANCE
TOLERANCE
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
