SPEC NO: DSAD2460 REV NO: V.6 DATE: NOV/29/2005 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000172
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
Description
The Green source color devices are made with Gallium
Phosphide Green Light Emitting Diode.
P/N: TA23-11GWA GREEN
58mm (2.3 INCH) 8x8 DOT MATRIX DISPLAY
Features
•2.3 INCH MATRIX HEIGHT.
•DOT SIZE 5mm.
•LOW CURRENT OPERATION.
•HIGH CONTRAST AND LIGHT OUTPUT.
•COMPATIBLE WITH ASCII AND EBCDIC CODES.
•STACKABLE HORIZONTALLY.
•COLUMN CATHODE AND COLUMN ANODE AVAILABLE.
•EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
•MULTICOLOR AVAILABLE.
•MECHANICALLY RUGGED.
•STANDARD : GRAY FACE, WHITE DOT.
•RoHS COMPLIANT.
SPEC NO: DSAD2460 REV NO: V.6 DATE: NOV/29/2005 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000172
Selection Guide
Selection Guide
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type Iv (ucd)
@ 10mA
Min. Typ.
TA23-11GWA GREEN (GaP) WHITE DIFFUSED 1900 10500 Column Anode
Description
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Green 565 nm IF=20mA
λDDominant Wavelength Green 568 nm IF=20mA
∆λ1/2 Spectral Line Half-width Green 30 nm IF=20mA
C Capacitance Green 15 pF VF=0V;f=1MHz
VFForward Voltage Green 2.2 2.5 V IF=20mA
IRReverse Current Green 10 uA VR = 5V
Parameter Green Units
Power dissipation 105 mW
DC Forward Current 25 mA
Peak Forward Current [1] 140 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 5 Seconds
SPEC NO: DSAD2460 REV NO: V.6 DATE: NOV/29/2005 PAGE: 3 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000172
Green TA23-11GWA
SPEC NO: DSAD2460 REV NO: V.6 DATE: NOV/29/2005 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP:1332000172
PACKING & LABEL SPECIFICATIONS TA23-11GWA
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity/ Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
