SPEC NO: DSAF2424 REV NO: V.1 DATE: APR/28/2005 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1101005222
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
WP7113SF6C
Description
SF6 Made with Gallium Aluminum Arsenide Infrared
Emitting diodes.
Features
MECHANICALLY AND SPECTRALLY MATCHED
TO THE PHOTOTRANSISTOR.
WATER CLEAR LENS.
RoHS COMPLIANT.
T-1 3/4 (5mm) INFRA-RED EMITTING DIODE
SPEC NO: DSAF2424 REV NO: V.1 DATE: APR/28/2005 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1101005222
Selection Guide
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Part No. Dice Lens Type Po (mW/sr)
@ 20 mA*50mA
Viewing
Angle
Min. Typ. 2θ
θθθ1/2
WP7113SF6C GaAlAs 10 40 20°
*50 *100 20°
WATER CLEAR
Item P/N Symbol Typ. Max. Units Condition
Forward Voltage SF6 VF1.35 1.6 V IF=20mA
Reverse Current SF6 IR- 10 uA VR=5V
Junction Capacitance SF6 C 30 - pF VF=0V;f=1MHz
Peak Spectral Wavelength SF6 λP860 - nm IF=20mA
Spectral Bandwidth SF6 ∆λ1/2 50 - nm IF=20mA
Item Symbol SF6 Units
Power dissipation PT100 mW
Forward Current IF50 mA
Peak Forward Current [1] iFS 1 A
Reverse Voltage VR5 V
Operating Temperature Topr -40°C To +85°C
Storage Temperature Tstg -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds
Notes:
1. 1/100 Duty Cycle, 10us Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Notes:
1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. * Luminous intensity with asterisk is measured at 50mA.
SPEC NO: DSAF2424 REV NO: V.1 DATE: APR/28/2005 PAGE: 3 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1101005222
WP7113SF6C
Remarks:
If special sorting is required (e.g. binning based on forward voltage or radiant intensity),
the typical accuracy of the sorting process is as follows:
1. Radiant Intensity: +/-15%
2. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAF2424 REV NO: V.1 DATE: APR/28/2005 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1101005222
PACKING & LABEL SPECIFICATIONS WP7113SF6C
