Device Name :
IGBT-Module
Type Name : 2MBI600U4G-120
Spec. No. : MS5F07031
Fuji Electric Device Technology Co.,Ltd.
Matsumoto Factory
H04-004-007
express written consent of Fuji Electric Device Technology Co.,Ltd.
This material and the information herein is the property of Fuji
Electric Device Technology Co.,Ltd. They shall be neither reproduced,
lent, or disclosed in any way whatsoever for the use of any
third party nor used for the manufacturing purposes without the
Specification
(600A/1200V-2in1 IGBT-Module)
APPROVALNAME
141
MS5F07031
DRAWN
CHECKED S.Miyashita
DWG.No.
T.Miyasaka
T.Nishimura
J.Komatsu
CHECKED 07- Feb - 08
07- Feb - 08
DATE
07- Feb - 08
H04-004-006
Checked
enactment --Issued
data -
Classifi -
cation
Ind. Content Applied
date
- -
- -
- -
This material and the information herein is the property of Fuji
Electric Device Technology Co.,Ltd. They shall be neither reproduced,
lent, or disclosed in any way whatsoever for the use of any
third party nor used for the manufacturing purposes without the
express written consent of Fuji Electric Device Technology Co.,Ltd.
- -
- -
- -
- -
- -
- -
- -
- -
- -
- - - -
- - - -
Approved
Date
Revised Records
07- Feb- 08
Drawn Checked
- -
- -
- -
S.Miyashita J.Komatsu T.Miyasaka
DWG.No.
142
MS5F07031
- -
1. Outline Drawing ( Unit : mm )
2. Equivalent circuit
H04-004-003
Type Name : 2MBI600U4G-120 ／ PKG.No. M256
143
MS5F07031
DWG.No.
express written consent of Fuji Electric Device Technology Co.,Ltd.
This material and the information herein is the property of Fuji
Electric Device Technology Co.,Ltd. They shall be neither reproduced,
lent, or disclosed in any way whatsoever for the use of any
third party nor used for the manufacturing purposes without the
main emitter
main collector
gate
sense emitter
sense collector
main emitter
main collector
sense collector
sense emitter
gate
3.Absolute Maximum Ratings ( at Tc= 25°C unless otherwise specified ）
Tc=25°C
Tc=80°C
Tc=25°C
Tc=80°C
(*1) All terminals should be connected together when isolation test will be done.
(*2) Recommendable Value : Mounting 4.25~5.75 Nm (M6)
Main Terminals 8~10 Nm (M8)
Sense Terminals 1.7~2.5 Nm (M4)
4. Electrical characteristics ( at Tj= 25°C unless otherwise specified)
(*) Biggest internal terminal resistance among arm.
H04-004-003
express written consent of Fuji Electric Device Technology Co.,Ltd.
This material and the information herein is the property of Fuji
Electric Device Technology Co.,Ltd. They shall be neither reproduced,
lent, or disclosed in any way whatsoever for the use of any
third party nor used for the manufacturing purposes without the
tr - 0.65 -
-
-
VCE(sat)
(chip)
Tj= 25°C
Tj=125°C
Tj= 25°C
Tj=125°C
VGE(th)
VGE=15V
Ic = 600A
- 68 - nF
144
MS5F07031
2.01
V
1.75
μsIF = 600A 0.45 -
2.28
2.10 -
DWG.No.
- 0.80
1.83
1.93
6.5
Units
- 1.90 2.05
Maximum
Ratings
- 2.08 2.26
-
1.0 mA
V
-
7.5 V
nA
-40 ~ +125
Ic = 600mA
1200
VCE = 20V
VGE=±20V
VCE = 0V - -
-
5.5
Tstg
Conditions
Storage temperature
Isolation
voltage Viso
Items Symbols
between terminal and copper base *1
1200
3670
1ms
Units
max.typ.min.
Char acter istics
5.75
10
Gate-Emitter voltage
Collector current
Junction temperature
Collector Power Dissipation
-Ic pulse
Pc
Tj
A
°C
W1 device
150
-Ic 600
2500 VAC
N m
AC : 1min.
1ms
V
±20 V
Items Symbols Conditions
VCESCollector-Emitter voltage
VGES
1200
Ic
Icp
800
600
1600
1200
Continuous
-
-
tf
trr -
VF
(chip)
Tj= 25°C -
Tj=125°C
IF = 600A
VCE(sat)
(main terminal)
-
-
Vcc = 600V
Ic = 600A
VGE=±15V,Tj=125℃
-
Cies
Tj=125°C
VF
(main terminal)
-
VGE=0V -
1.65 1.80
Tj= 25°C -
Collector-Emitter
saturation voltage
Zero gate voltage
Collector current
Gate-Emitter
leakage current
Reverse recovery
Turn-on
0.29
Rgon = 6.8 Ω
Rgoff = 2 Ω
Lead resistance, terminal-chip *
Turn-off
ton
toff
0.20
- mΩR lead -
Mounting
Main Terminals
Gate-Emitter
threshold voltage
VGE = 0V
VCE = 1200V
IGES
ICES
Screw Torque *2
Input capacitance
Forward on voltage
μs
Sense Terminals 2.5
VCE=10V,VGE=0V,f=1MHz
- 1.35 -
5. Thermal resistance characteristics
* This is the value which is defined mounting on the additional cooling fin with thermal compound.
6. Indication on module
7.Applicable category
This specification is applied to IGBT Module named 2MBI600U4G-120 .
8.Storage and transportation notes
・The module should be stored at a standard temperature of 5 to 35°C and humidity of 45 to 75% .
・Store modules in a place with few temperature changes in order to avoid condensation on the module surface.
・Avoid exposure to corrosive gases and dust.
・Avoid excessive external force on the module.
・Store modules with unprocessed terminals.
・Do not drop or otherwise shock the modules when transporting.
9. Definitions of switching time
10. Packing and Labeling
Display on the packing box
- Logo of production
- Type name
- Lot No
- Products quantity in a packing box
H04-004-003
express written consent of Fuji Electric Device Technology Co.,Ltd.
DWG.No.
145
MS5F07031
Items Symbols Conditions Character istics Units
min. typ. max.
with Thermal Compound (*)
-
- 0.006
Thermal resistance(1device)
Contact Thermal resistance(1device)
Rth(j-c)
Rth(c-f)
°C/W
- 0.034
- - 0.060
IGBT
FWD
-
This material and the information herein is the property of Fuji
Electric Device Technology Co.,Ltd. They shall be neither reproduced,
lent, or disclosed in any way whatsoever for the use of any
third party nor used for the manufacturing purposes without the
L
Vcc
Ic
VCE
RG
VGE
VGE
VCE
Ic
0V
0A
0V
10%
90%
10% 10%
90%
90%
0V
Ic
VCE
～～
～～
～～
o n
t
r
t
r ( i )
t
o f f
t
f
t
r r
I
r r
t
２ＭＢＩ６００Ｕ４Ｇ－１２０
Typ.Name Lot No. for Fuji
Place of manufucturing Display (16 DIGITS)
６００Ａ １２００Ｖ
Rating
H04-004-003
This material and the information herein is the property of Fuji
Electric Device Technology Co.,Ltd. They shall be neither reproduced,
lent, or disclosed in any way whatsoever for the use of any
third party nor used for the manufacturing purposes without the
11.Reliability test results
146
MS5F07031
DWG.No.
express written consent of Fuji Electric Device Technology Co.,Ltd.
Reliability Test Items
Test
cate-
gories
Test items Test methods and conditions
Reference
norms
EIAJ ED-4701
(Aug.-2001 edition)
Number
of sample
Accept-
ance
number
1 Terminal Strength Pull force : 40N Test Method 401 5 ( 0 : 1 )
(Pull test) Test time :
10±1 sec.
Method
Ⅰ
2 Mounting Strength Screw torque :
1.8 ~ 2.1 N·m (M4)
Test Method 402 5 ( 0 : 1 )
4.25 ~ 5.75 N·m (M6)
Method
Ⅱ
8.0~ 10.0 N·m (M8)
Test time :
10±1 sec.
3 Vibration Range of frequency : 10 ~ 500Hz Test Method 403 5 ( 0 : 1 )
Sweeping time : 15 min. Reference 1
Acceleration :
100m/s
2Condition code B
Sweeping direction : Each X,Y,Z axis
Test time : 6 hr. (2hr./direction)
4 Shock Maximum acceleration :
1000m/s
2Test Method 404 5 ( 0 : 1 )
Pulse width : 6.0msec. Condition code A
Direction : Each X,Y,Z axis
Test time : 3 times/direction
1 High Temperature Storage temp. :
125±5 ℃
Test Method 201 5 ( 0 : 1 )
Storage Test duration : 1000hr.
2 Low Temperature Storage temp. :
-40±5 ℃
Test Method 202 5 ( 0 : 1 )
Storage Test duration : 1000hr.
3 Temperature Storage temp. :
85±2 ℃
Test Method 103 5 ( 0 : 1 )
Humidity Relative humidity :
85±5%
Test code C
Storage Test duration : 1000hr.
4 Unsaturated Test temp. : 120
±
2
℃
Test Method 103 5 ( 0 : 1 )
Pressurized Vapor Test humidity :
85±5%
Test code E
Test duration : 96hr.
5 Temperature Test Method 105 5 ( 0 : 1 )
Cycle Test temp. : Low temp. -40
±
5
℃
High temp. 125
±
5
℃
RT 5 ~ 35
℃
Dwell time : High ~ RT ~ Low ~ RT
1hr. 0.5hr. 1hr. 0.5hr.
Number of cycles : 100 cycles
6 Thermal Shock +0 Test Method 307 5 ( 0 : 1 )
Test temp. : High temp. 100
-5
℃
Method
Ⅰ
+5 Condition code A
Low temp. 0
-0
℃
Used liquid : Water with ice and boiling water
Dipping time : 5 min. par each temp.
Transfer time : 10 sec.
Number of cycles : 10 cycles
Mechanical Tests
Environment Tests
H04-004-003
DWG.No.
express written consent of Fuji Electric Device Technology Co.,Ltd.
147
MS5F07031
This material and the information herein is the property of Fuji
Electric Device Technology Co.,Ltd. They shall be neither reproduced,
lent, or disclosed in any way whatsoever for the use of any
third party nor used for the manufacturing purposes without the
Reliability Test Items
Test
cate-
gories
Test items Test methods and conditions
Reference
norms
EIAJ ED-4701
(Aug.-2001 edition)
Number
of sample
Accept-
ance
number
1 High temperature Test Method 101 5 ( 0 : 1 )
Reverse Bias Test temp. : Ta = 125
±
5
℃
(Tj
≦
150
℃
)
Bias Voltage :
VC = 0.8×VCES
Bias Method : Applied DC voltage to C-E
VGE = 0V
Test duration : 1000hr.
2 High temperature Test Method 101 5 ( 0 : 1 )
Bias (for gate) Test temp. : Ta = 125
±
5
℃
(Tj
≦
150
℃
)
Bias Voltage : VC = VGE = +20V or -20V
Bias Method : Applied DC voltage to G-E
VCE = 0V
Test duration : 1000hr.
3 Temperature Test Method 102 5 ( 0 : 1 )
Humidity Bias Test temp. : 85
±
2 oCCondition code C
Relative humidity : 85
±
5%
Bias Voltage :
VC = 0.8×VCES
Bias Method : Applied DC voltage to C-E
VGE = 0V
Test duration : 1000hr.
4 Intermitted ON time : 2 sec. Test Method 106 5 ( 0 : 1 )
Operating Life OFF time : 18 sec.
(Power cycle) Test temp. :
Tj=100±5 deg
( for IGBT ) Tj
≦
150
℃, Ta=25±5 ℃
Number of cycles : 15000 cycles
Endurance TestsEndurance Tests
Failure Criteria
Item Characteristic Symbol Failure criteria Unit Note
Lower limit Upper limit
Electrical Leakage current ICES -
USL×2
mA
characteristic
±IGES
-
USL×2
A
Gate threshold voltage VGE(th)
LSL×0.8 USL×1.2
mA
Saturation voltage VCE(sat) -
USL×1.2
V
Forward voltage VF -
USL×1.2
V
Thermal IGBT VGE -
USL×1.2
mV
resistance or VCE
FWD VF -
USL×1.2
mV
Isolation voltage Viso Broken insulation -
Visual Visual inspection
inspection Peeling - The visual sample -
Plating
and the others
LSL : Lower specified limit.
USL : Upper specified limit.
Note : Each parameter measurement read-outs shall be made after stabilizing the components at room
ambient for 2 hours minimum, 24 hours maximum after removal from the tests. And in case of the
wetting tests, for example, moisture resistance tests, each component shall be made wipe or dry
completely before the measurement.
Each parameter measurement read-outs shall be made after stabilizing the components at room
ambient for 2 hours minimum, 24 hours maximum after removal from the tests. And in case of the
wetting tests, for example, moisture resistance tests, each component shall be made wipe or dry
completely before the measurement.
H04-004-003
express written consent of Fuji Electric Device Technology Co.,Ltd.
5 0
Condition code C
2( for gate )
Endurance Tests
1High temperature Test Method 101
4
Intermitted Operating Life
Test Method 106 5 0
( Power cycling )
( for IGBT )
5 0
Reverse Bias
High temperature Bias Test Method 101 5 0
3 Temperature Humidity Bias Test Method 102
0method Ⅰ
Condition code A
Test Method 307
5
5 Temperature Cycle
6 Thermal Shock
Test Method 105 5
5 0
0
Test code E
5 0
Storage Test code C
Low Temperature Storage Test Method 202 5 0
5 0
Condition code B
Environment Tests
1 High Temperature Storage Test Method 201 5 0
2
5 0
Method Ⅱ
3 Vibration Test Method 403 5 0
Condition code B
5 0
(Pull test) Method Ⅰ
Mechanical Tests
1Terminal Strength Test Method 401
2 Mounting Strength Test Method 402
4 Shock Test Method 404
Reliability Test Items
Test
cate-
gories
Test items
Reference norms
EIAJ ED-4701
(Aug.-2001 edition)
Number
of test
sample
Number
of
failure
sample
This material and the information herein is the property of Fuji
Electric Device Technology Co.,Ltd. They shall be neither reproduced,
lent, or disclosed in any way whatsoever for the use of any
third party nor used for the manufacturing purposes without the
148
MS5F07031
DWG.No.
3Temperature Humidity Test Method 103
4Unsaturated Test Method 103
Pressurized Vapor
H04-004-003
Capacitance vs. Collector-Emitter voltage (typ.) Dynamic Gate charge (typ.)
149
MS5F07031
Tj= 25°C
DWG.No.
VGE=0V, f= 1MHz, Tj= 25°C
This material and the information herein is the property of Fuji
Electric Device Technology Co.,Ltd. They shall be neither reproduced,
lent, or disclosed in any way whatsoever for the use of any
third party nor used for the manufacturing purposes without the
Collector current vs. Collector-Emitter voltage (typ.)
express written consent of Fuji Electric Device Technology Co.,Ltd.
Tj= 125°C, chip
Tj=25℃,chip
Collector-Emitter voltage vs. Gate-Emitter voltage (typ.)
Collector current vs. Collector-Emitter voltage (typ.)
Tj=25℃,chip
VGE=+15V,chip
Collector-Emitter voltage vs. Gate-Emitter voltage (typ.)
0
200
400
600
800
1000
1200
1400
0.0 1.0 2.0 3.0 4.0 5.0
Collector current : Ic [A]
Collector-Emitter voltage : VCE [V]
VGE=20
15V
12V
10V
8V
0
200
400
600
800
1000
1200
1400
0.0 1.0 2.0 3.0 4.0 5.0
Collector current : Ic [A]
Collector-Emitter voltage : VCE [V]
VGE=20
15V
12V
10V
8V
0
200
400
600
800
1000
1200
1400
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Collector current : Ic [A]
Collector-Emitter voltage : VCE [V]
Tj=125°C
Tj=25°
C
0
2
4
6
8
10
5 10 15 20 25
Collector - Emitter voltage : VCE [ V ]
Gate - Emitter voltage : VGE [ V ]
Ic=1200A
Ic=600A
Ic=300A
1
10
100
1000
0 10 20 30
Capacitance : Cies, Coes, Cres [ nF ]
Collector-Emitter voltage : VCE [V]
Cies
C
oes
C
res
0
200
400
600
800
1000
0 500 1000 1500 2000 2500 3000
Gate charge : Qg [ nC ]
Collector-Emitter voltage:VCE[V]
0
5
10
15
20
25
Gate-Emitter voltage:VGE[V]
VGE
VCE
H04-004-003
express written consent of Fuji Electric Device Technology Co.,Ltd.
Switching loss vs. Gate resistance (typ.)
Vcc=600V, Ic=600A,VGE=±15V, Tj= １25°C
Reverse bias safe operating area (max.)
Switching time vs. Collector current (typ.)
Vcc=600V, VGE=±15V, Rgon=6.8Ω, Rgoff=2Ω, Tj= １25°C
Vcc=600V, VGE=±15V, Rgon=6.8Ω, Rgoff=2Ω, Tj= １25°C
Switching time vs. Gate resistance (typ.)
Switching loss vs. Collector current (typ.)
Vcc=600V, Ic=600A,VGE=±15V, Tj= １25°C
This material and the information herein is the property of Fuji
Electric Device Technology Co.,Ltd. They shall be neither reproduced,
lent, or disclosed in any way whatsoever for the use of any
third party nor used for the manufacturing purposes without the
DWG.No.
1410
MS5F07031
±VGE=15V ,Tj = 125°C / chip
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
0 200 400 600 800 1000
Switching time : ton, tr, toff, tf [ us ]
Collector current : Ic [ A ]
ton
toff
tf
tr
0.0
1.0
2.0
3.0
4.0
5.0
6.0
0 4 8 12 16 20 24 28 32 36
Switching time : ton, tr, toff, tf [ us ]
Gate resistance : Rg [ Ω ]
tr
tf
toff
ton
0
25
50
75
100
125
150
175
200
225
250
0 200 400 600 800 1000
Switching loss : Eon, Eoff, Err [ mJ/pulse ]
Collector current : Ic [ A ] , Forward current : IF [ A ]
Eon
Eoff
Err
0
50
100
150
200
250
300
350
400
450
500
0 4 8 12 16 20 24 28 32 36
Switching loss : Eon, Eoff, Err [ mJ/pulse ]
Gate resistance : Rg [ Ω ]
Eoff
Err
Eon
0
200
400
600
800
1000
1200
1400
0 200 400 600 800 1000 1200 1400
Collector current : Ic [ A ]
Collector - Emitter voltage : VCE [ V ]
H04-004-003
1411
MS5F07031
DWG.No.
Transient thermal resistance (max.)
express written consent of Fuji Electric Device Technology Co.,Ltd.
This material and the information herein is the property of Fuji
Electric Device Technology Co.,Ltd. They shall be neither reproduced,
lent, or disclosed in any way whatsoever for the use of any
third party nor used for the manufacturing purposes without the
Forward current vs. Forward on voltage (typ.)
chip Vcc=600V, VGE=±15V, Rg=6.8Ω, Tj=125℃
Reverse recovery characteristics (typ.)
0
200
400
600
800
1000
1200
1400
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
Forward current : IF [ A ]
Forward on voltage : VF [ V ]
Tj=25
℃Tj=125℃
0
50
100
150
200
250
300
350
400
450
0 200 400 600 800 1000
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
Reverse recovery time : trr [us]
Reverse recovery current : Irr [ A ]
Forward current : IF [ A ]
trr
Irr
0.001
0.010
0.100
1.000
0.001 0.010 0.100 1.000
Thermal resistanse : Rth(j-c) [ °C/W ]
Pulse width : Pw [ sec ]
FWD
IGBT
H04-004-003
DWG.No.
express written consent of Fuji Electric Device Technology Co.,Ltd.
1412
MS5F07031
This material and the information herein is the property of Fuji
Electric Device Technology Co.,Ltd. They shall be neither reproduced,
lent, or disclosed in any way whatsoever for the use of any
third party nor used for the manufacturing purposes without the
Warnings
- This product shall be used within its absolute maximum rating (voltage, current, and temperature). This product
may be broken in case of using beyond the ratings.
製品の絶対最大定格（電圧，電流，温度等）の範囲内で御使用下さい。絶対最大定格を超えて使用すると、素子が破壊する
場合があります。
- Connect adequate fuse or protector of circuit between three-phase line and this product to prevent the equipment
from causing secondary destruction, such as fire, its spreading, or explosion.
万一の不慮の事故で素子が破壊した場合を考慮し、商用電源と本製品の間に適切な容量のヒューズ又はブレーカーを必ず
付けて火災，爆発，延焼等の２次破壊を防いでください。
-Use this product after realizing enough working on environment and considering of product's reliability life.
This product may be broken before target life of the system in case of using beyond the product's reliability life.
製品の使用環境を十分に把握し、製品の信頼性寿命が満足できるか検討の上、本製品を適用して下さい。製品の信頼性寿命
を超えて使用した場合、装置の目標寿命より前に素子が破壊する場合があります。
-If the product had been used in the environment with acid, organic matter, and corrosive gas ( hydrogen sulfide,
sulfurous acid gas), the product's performance and appearance can not be ensured easily.
酸・有機物・腐食性ガス（硫化水素，亜硫酸ガス等）を含む環境下で使用された場合、製品機能・外観等の保証はできません。
-Use this product within the power cycle curve (Technical Rep.No. : MT5F12959). Power cycle capability is
classified to delta-Tj mode which is stated as above and delta-Tc mode. Delta-Tc mode is due to rise and down
of case temperature (Tc), and depends on cooling design of equipment which use this product. In application
which has such frequent rise and down of Tc, well consideration of product life time is necessary.
本製品は、パワーサイクル寿命カーブ以下で使用下さい(技術資料No.: MT5F12959)。パワーサイクル耐量にはこのΔTjによる
場合の他に、ΔTcによる場合があります。これはケース温度(Tc)の上昇下降による熱ストレスであり、本製品をご使用する際
の放熱設計に依存します。ケース温度の上昇下降が頻繁に起こる場合は、製品寿命に十分留意してご使用下さい。
-Never add mechanical stress to deform the main or control terminal. The deformed terminal may cause poor
contact problem.
主端子及び制御端子に応力を与えて変形させないで下さい。 端子の変形により、接触不良などを引き起こす場合があります。
-Use this product with keeping the cooling fin's flatness between screw holes within 100um at 100mm and the
roughness within 10um. Also keep the tightening torque within the limits of this specification. Too large convex
of cooling fin may cause isolation breakdown and this may lead to a critical accident. On the other hand, too
large concave of cooling fin makes gap between this product and the fin bigger, then, thermal conductivity will
be worse and over heat destruction may occur.
冷却フィンはネジ取り付け位置間で平坦度を
100mm
で
100um
以下、表面の粗さは
10um
以下にして下さい。 過大な凸反り
があったりすると本製品が絶縁破壊を起こし、重大事故に発展する場合があります。また、過大な凹反りやゆがみ等があると、
本製品と冷却フインの間に空隙が生じて放熱が悪くなり、熱破壊に繋がることがあります。
-In case of mounting this product on cooling fin, use thermal compound to secure thermal conductivity. If the
thermal compound amount was not enough or its applying method was not suitable, its spreading will not be
enough, then, thermal conductivity will be worse and thermal run away destruction may occur.
Confirm spreading state of the thermal compound when its applying to this product.
(Spreading state of the thermal compound can be confirmed by removing this product after mounting.)
素子を冷却フィンに取り付ける際には、熱伝導を確保するためのコンパウンド等をご使用ください。又、塗布量が不足したり、
塗布方法が不適だったりすると、コンパウンドが十分に素子全体に広がらず、放熱悪化による熱破壊に繋がる事があります。
コンパウンドを塗布する際には、製品全面にコンパウンドが広がっている事を確認してください。
(実装した後に素子を取りはずすとコンパウンドの広がり具合を確認する事が出来ます。)
-It shall be confirmed that IGBT's operating locus of the turn-off voltage and current are within the RBSOA
specification. This product may be broken if the locus is out of the RBSOA.
ターンオフ電圧・電流の動作軌跡がRBSOA仕様内にあることを確認して下さい。RBSOAの範囲を超えて使用すると素子が破壊
する可能性があります。
H04-004-003
DWG.No.
express written consent of Fuji Electric Device Technology Co.,Ltd.
1413
MS5F07031
This material and the information herein is the property of Fuji
Electric Device Technology Co.,Ltd. They shall be neither reproduced,
lent, or disclosed in any way whatsoever for the use of any
third party nor used for the manufacturing purposes without the
Warnings
-If excessive static electricity is applied to the control terminals, the devices may be broken. Implement some
countermeasures against static electricity.
制御端子に過大な静電気が印加された場合、素子が破壊する場合があります。取り扱い時は静電気対策を実施して下さい。
-Never add the excessive mechanical stress to the main or control terminals when the product is applied to
equipments. The module structure may be broken.
素子を装置に実装する際に、主端子や制御端子に過大な応力を与えないで下さい。端子構造が破壊する可能性があります。
-In case of insufficient -VGE, erroneous turn-on of IGBT may occur. -VGE shall be set enough value to prevent
this malfunction. (Recommended value : -VGE = -15V)
逆バイアスゲート電圧-VGEが不足しますと誤点弧を起こす可能性があります。誤点弧を起こさない為に-VGEは十分な値で
設定して下さい。 （推奨値 : -VGE = -15V)
-In case of higher turn-on dv/dt of IGBT, erroneous turn-on of opposite arm IGBT may occur. Use this product in
the most suitable drive conditions, such as +VGE, -VGE, RG to prevent the malfunction.
ターンオン dv/dt が高いと対抗アームのＩＧＢＴが誤点弧を起こす可能性があります。誤点弧を起こさない為の最適なドライブ
条件（+VGE, -VGE, RG等）でご使用下さい。
- This product may be broken by avalanche in case of VCE beyond maximum rating VCES is applied between
C-E terminals. Use this product within its absolute maximum voltage.
VCES
を
超
えた
電圧
が
印加
された
場合
、
アバランシェ
を
起
こして
素子破壊
する
場合
があります
。
VCE
は
必
ず
絶対定格
の
範囲内
でご
使用下
さい
。
H04-004-003
DWG.No.
express written consent of Fuji Electric Device Technology Co.,Ltd.
1414
MS5F07031
This material and the information herein is the property of Fuji
Electric Device Technology Co.,Ltd. They shall be neither reproduced,
lent, or disclosed in any way whatsoever for the use of any
third party nor used for the manufacturing purposes without the
Cautions
- Fuji Electric Device Technology is constantly making every endeavor to improve the product quality and reliability.
However, semiconductor products may rarely happen to fail or malfunction. To prevent accidents causing injury or
death, damage to property like by fire, and other social damage resulted from a failure or malfunction of
the Fuji Electric Device Technology semiconductor products, take some measures to keep safety such as redundant
design, spread-fire-preventive design, and malfunction-protective design.
富士電機デバイステクノロジーは絶えず製品の品質と信頼性の向上に努めています。しかし、半導体製品は故障が発生したり、
誤動作する場合があります。富士電機デバイステクノロジー製半導体製品の故障または誤動作が、結果として人身事故・火災
等による財産に対する損害や社会的な損害を起こさないように冗長設計・延焼防止設計・誤動作防止設計など安全確保
のための手段を講じて下さい。
- The application examples described in this specification only explain typical ones that used the Fuji Electric Device
Technology products. This specification never ensure to enforce the industrial property and other rights, nor license the
enforcement rights.
本仕様書に記載してある応用例は、富士電機デバイステクノロジー製品を使用した代表的な応用例を説明するものであり、
本仕様書によって工業所有権、その他権利の実施に対する保障または実施権の許諾を行うものではありません。
- The product described in this specification is not designed nor made for being applied to the equipment or
systems used under life-threatening situations. When you consider applying the product of this specification
to particular used, such as vehicle-mounted units, shipboard equipment, aerospace equipment, medical devices,
atomic control systems and submarine relaying equipment or systems, please apply after confirmation
of this product to be satisfied about system construction and required reliability.
本仕様書に記載された製品は、人命にかかわるような状況下で使用される機器あるいはシステムに用いられることを
目的として設計・製造されたものではありません。本仕様書の製品を車両機器、船舶、航空宇宙、医療機器、原子力
制御、海底中継機器あるいはシステムなど、特殊用途へのご利用をご検討の際は、システム構成及び要求品質に
満足することをご確認の上、ご利用下さい。
If there is any unclear matter in this specification, please contact Fuji Electric Device Technology Co.,Ltd.
