Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC551LP4 / 551LP4E v02.1210 Mixers - SINGLE & DOUBLE BALANCED - SMT 10 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Typical Applications Features The HMC551LP4 / HMC551LP4E is ideal for Wireless Infrastructure Applications: Input IP3: +27 dBm * Cellular / 3G Infrastructure LO to RF Isolation: 27 dB * Base Stations & Repeaters Low Conversion Loss: 8 dB * GSM, CDMA & W-CDMA Single Supply: +5V @ 62 mA * PLMR & ISM 24 Lead 4x4mm QFN Package: 9 mm Functional Diagram General Description Low Input LO Drive: -4 to +4 dBm The HMC551LP4 & HMC551LP4E are high linearity, double balanced Converter ICs that operate from 0.8 to 1.2 GHz and deliver a +27 dBm input third order intercept point. The LO amplifier output and high dynamic range mixer input are positioned so that an external LO filter can be placed in series between them. The converter provides 27 dB of LO to RF isolation and is ideal for upconverter and downconverter applications. The IC operates from a single +5V supply consuming 62 mA of current and accepts a LO drive level of -4 to +4 dBm. The design requires no external baluns and supports IF frequencies between DC and 300 MHz. The HMC551LP4(E) are pin for pin compatible with the HMC552LP4(E) which operate from 1.6 to 3.0 GHz. Electrical Specifications, TA = +25 C, LO = 0 dBm, Vcc = +5V, R1 = 18 Ohms, IF = 100 MHz* Parameter Min. Typ. Frequency Range, RF, LO 0.8 - 1.2 Frequency Range, IF DC - 300 Max. Units GHz MHz Conversion Loss 8 10 Noise Figure (SSB) 8 dB dB dB LO to RF Isolation 20 27 LO to IF Isolation 12 17 dB IP3 (Input) 27 dBm 1 dB Compression (Input) 17 dBm -4 to +4 dBm 62 mA LO Drive Input Level (Typical) Supply Current (Icc) *Unless otherwise noted, all measurements performed as a downconverter configured as shown in application circuit. 10 - 1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC551LP4 / 551LP4E v02.1210 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Isolation @ LO = 0 dBm 0 -5 -10 -10 +25C +85C -40C -15 -20 0.6 0.7 0.8 0.9 1 1.1 RF to IF LO to RF LO to IF -30 1.2 1.3 1.4 -40 0.6 1.5 0.7 0.8 0.9 Conversion Gain vs. LO Drive 1.1 1.2 1.3 1.4 1.3 1.4 1.5 Return Loss @ LO = 0 dBm 0 0 RF LO -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 1 FREQUENCY (GHz) FREQUENCY (GHz) -10 LO= -4 dBm LO= -2 dBm LO= 0 dBm LO= 2 dBm LO= 4 dBm -15 -20 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 -5 -10 -15 -20 0.6 1.5 0.7 0.8 0.9 FREQUENCY (GHz) -5 -5 RESPONSE (dB) 0 -10 -20 0.6 1.1 1.2 1.5 IF Bandwidth @ LO = 0 dBm 0 LO= -4 dBm LO= -2 dBm LO= 0 dBm LO= 2 dBm LO= 4 dBm -15 1 FREQUENCY (GHz) Upconverter Performance Conversion Gain vs. LO Drive CONVERSION GAIN (dB) 10 -20 CONVERSION GAIN RETURN LOSS -10 Mixers - SINGLE & DOUBLE BALANCED - SMT 0 ISOLATION (dB) CONVERSION GAIN (dB) Conversion Gain vs. Temperature @ LO = 0 dBm -15 -20 0.7 0.8 0.9 1 1.1 1.2 FREQUENCY (GHz) 1.3 1.4 1.5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 HMC551LP4 / 551LP4E v02.1210 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Input IP3 vs. LO Drive 35 30 30 INPUT IP3 (dBm) 35 25 +25C +85C -40C 20 15 0.7 0.8 0.9 1 1.1 25 LO= -4 dBm LO= -2 dBm LO= 0 dBm LO= 2 dBm LO= 4 dBm 20 1.2 15 0.7 1.3 0.8 0.9 FREQUENCY (GHz) 70 65 65 INPUT IP2 (dBm) +25C +85C -40C 55 50 45 40 0.7 1.1 1.2 1.3 1.2 1.3 Input IP2 vs. LO Drive 70 60 1 FREQUENCY (GHz) Input IP2 vs. Temperature @ LO = 0 dBm LO= -4 dBm LO= -2 dBm LO= 0 dBm LO= 2 dBm LO= 4 dBm 60 55 50 45 0.8 0.9 1 1.1 1.2 40 0.7 1.3 0.8 0.9 FREQUENCY (GHz) 1 1.1 FREQUENCY (GHz) Input P1dB vs. Temperature @ LO = 0 dBm 22 20 INPUT P1dB (dBm) INPUT IP2 (dBm) Mixers - SINGLE & DOUBLE BALANCED - SMT 10 INPUT IP3 (dBm) Input IP3 vs. Temperature @ LO = 0 dBm 18 16 14 +25C +85C -40C 12 10 0.7 0.8 0.9 1 1.1 1.2 1.3 FREQUENCY (GHz) 10 - 3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC551LP4 / 551LP4E v02.1210 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz MxN Spurious @ IF Port Harmonics of LO 0 1 2 nLO Spur @ RF Port 3 4 LO Freq. (GHz) 1 2 3 4 0 xx -3 33 21 21 0.7 24 21 34 40 1 4 0 13 35 45 0.8 25 22 34 49 2 81 68 63 60 74 0.9 27 23 38 57 3 87 102 85 74 71 1.0 28 23 43 45 4 106 96 102 103 103 1.1 29 24 43 54 1.2 30 25 37 61 RF Freq. = 0.9 GHz @ -10 dBm LO Freq. = 0.8 GHz @ 0 dBm All values in dBc relative to the IF power level. LO = 0 dBm All values in dBc below input LO level measured at RF port. Typical Supply Current Vcc Icc (mA) +5.0 62 mA For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 Mixers - SINGLE & DOUBLE BALANCED - SMT nLO mRF 10 - 4 HMC551LP4 / 551LP4E v02.1210 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Absolute Maximum Ratings Mixers - SINGLE & DOUBLE BALANCED - SMT 10 RF / IF Input (Vcc= +5V) +31 dBm LO Drive (Vcc= +5V) +10 dBm BIAS +7 Vdc Junction Temperature 150C Continuous Pdiss (T = 85C) (derate 9.5 mW/C above 85C) 0.6 W Thermal Resistance (junction to ground paddle) 105.6 C/W Storage Temperature -65 to +150C Operating Temperature -40 to +85C ESD Sensitivity (HBM) Class 1C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC551LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC551LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] H551 XXXX H551 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 10 - 5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC551LP4 / 551LP4E v02.1210 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Pin Descriptions Function Description 1 MIX LO This pin is DC coupled and matched to 50 Ohms. An off chip DC blocking capacitor is required. 2, 6 - 9, 11 - 17, 19 - 24 N/C No connection. These pins may be connected to RF ground. Performance will not be affected. 3 BIAS Power supply for the LO amplifier Bias resistor is required . Three external bypass capacitors are recommended for optimum performance, as illustrated in the application circuit. 4 GND Backside of package has exposed metal ground paddle that must also be connected to ground. 5 LO This pin is DC coupled and matched to 50 Ohms from 0.8 to 1.2 GHz. An off chip DC blocking capacitor is required. 10 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/ sink more than 18 mA of current or die non-function and possible die failure will result. 18 RF This pin is DC coupled and matched to 50 Ohms. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 Mixers - SINGLE & DOUBLE BALANCED - SMT Pin Number 10 - 6 HMC551LP4 / 551LP4E v02.1210 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Evaluation PCB Mixers - SINGLE & DOUBLE BALANCED - SMT 10 List of Materials for Evaluation PCB 113419 [1] Item Description J1 - J3 PCB Mount SMA RF Connector J4, J5 DC Pin C1, C2, C5 100 pF Chip Capacitor, 0402 Pkg. C3 1000 pF Chip Capacitor, 0603 Pkg. C4 2.2 F Capacitor, Tantalum L1 56 nH Chip Inductor, 0603 Pkg. R1 18 Ohm Resistor, 1210 1/8 watt Pkg. U1 HMC551LP4 / HMC551LP4E PCB [2] 113417 Evaluation Board The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 10 - 7 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC551LP4 / 551LP4E v02.1210 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Application Circuit Recommended Components Values (IF = DC - 300 MHz) C3 1000 pF C4 2.2 F C1, C2, C5 100 pF L1 56 nH R1 18 Ohms Note: Select R1 to achieve Icc by using equation below, R1 18 Ohms. Icc = ( Vs - 3.8 )/ R1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - SINGLE & DOUBLE BALANCED - SMT 10 10 - 8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC551LP4E HMC551LP4ETR HMC551LP4 HMC551LP4TR