ER1600CT – ER1606CT 1 of 4 © 2006 Won-Top Electronics
Pb
ER1600CT – ER1606CT
16A GLASS PASSIVATED DUAL SUPERFAST RECTIFIER
Features
! Glass Passivated Die Construction B
! Super-Fast Switching
! Low Forward Voltage Drop C
! Low Reverse Leakage Current
! High Surge Current Capability G A
! Plastic Material has UL Flammability
Classification 94V-O PIN1 2 3
D
Mechanical Data F E
! Case: TO-220, Molded Plastic
! Terminals: Plated Leads Solderable per P
MIL-STD- 202, Met hod 208
! Polarity: See Diagram I
! Weight: 2.24 grams (approx.)
! Mounting Position: Any H L
! Mounting Torque: 11.5 cm-kg (10 in-lbs) Max.
! Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 4
PIN 1 - +
J PIN 3 - Case, PIN 2
K
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capaciti ve load, derate current by 20%.
Characteristic Symbol ER
1600CT ER
1601CT ER
1601ACT ER
1602CT ER
1603CT ER
1604CT ER
1606CT Unit
Peak Repetit i ve Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR50 100 150 200 300 400 600 V
RMS Reverse Voltage VR(RMS) 35 70 105 140 210 280 420 V
Average Rectified Output Current @TC = 105°C IO16 A
Non-Repetiti ve P eak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method) IFSM 125 A
Forward Voltage @IF = 8.0A VFM 0.95 1.3 1.7 V
Peak Reverse Current @T
A = 25°C
At Rated DC Blocking Voltage @TA = 125°C IRM 10
500 µA
Reverse Recovery Time (Note 1) trr 35 50 nS
Typi cal Junction Capacitanc e (Note 2) Cj80 60 pF
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
WTE
POWER SEMICONDUCTORS
TO-220
Dim Min Max
A13.90 15.90
B9.80 10.70
C2.54 3.43
D3.56 4.56
E12.70 14.73
F0.51 0.96
G3.55 Ø 4.09 Ø
H5.75 6.85
I4.16 5.00
J2.03 2.92
K0.30 0.65
L1.14 1.40
P2.29 2.79
All Dimensions in mm
ER1600CT – ER1606CT 2 of 4 © 2006 Won-Top Electronics

50V DC
Approx
50NI(Non-inductive)Ω10 NIΩ
1.0
NI
ΩOscilloscope
(Note 1)
Pulse
Generator
(Note 2)
Device
Under
Test
t
rr
Settimebasefor5/10ns/cm
+0.5A
0A
-0.25A
-1.0A
Notes:
1. Rise Time = 7.0ns max. Input Impedance = 1.0M , 22pF.
2. Rise Time = 10ns max. Input Impedance = 50 .
Ω
Ω
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
(+)
(+)
(-)
(-)
0
225
110 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60Hz
Fig. 3 Maximum Non-Repetitive Surge Current
8.3 ms single half-sine-wave
JEDEC method
75
150
10
100
400
0.1 1.0 10 100
C , CAPACITANCE (pF)
j
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
R
T = 25 C
f = 1.0MHz
j
°
ER1603CT -
ER1606CT
0
4
8
0 50 100 150
I , AVERAGE FORWARD CURRENT (A)
(AV)
T , CASE TEMPERATURE ( C)
Fig. 1 Forward Current Derating Curve
C
°
12
16
20
0.1
1.0
10
100
0 0.6 1.2 1.8
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
F
Pulse width = 300 s
2% duty cycle µ
1600 -1602
1603 - 1604
1606
ER1600CT -
ER1602CT
ER1600CT – ER1606CT 3 of 4 © 2006 Won-Top Electronics
MARKING INFORMATION
PACKAGING INFORMATION
Tube Size
L x W x H (mm) Quantity
(PCS) Inner Box Size
L x W x H (mm) Quantity
(PCS) Carton Size
L x W x H (mm) Quantity
(PCS) Approx. Gross Weight
(KG)
525 x 31 x 6 50 555 x 145 x 95 2,000 572 x 306 x 218 8,000 19.0
RECOMMENDED SCREW MOUNTING ARRANGEMENT
Note: 1. Anti-static tube, water clear color.
BULK
WTE = Manufacturer’s Logo
ER160xCT = Devi ce Number
x = 0, 1, 1A, 2, 3, 4 or 6
Polarity = As Marked on Body
Plain Washe
r
Insulatin
g
Bushin
g
Rectifie
r
Insulato
r
Heatsink
Compression Washe
r
4-40 HEX Nut
Recommended isolated mounting when
screw is at heatsink potential. 4-40
hardware is used.
Screw should not be tightened with any
type of air-forced torque or equipment
that may cause high impact on device
package. The insulating bushing inside
the mounting hole will insure the screw
threads do not contact the metal base.
The interface should apply a layer of
thermal grease or a highly conductive
thermal pad for better heat dissipation.
4-40 PAN or HEX Head Scre
w
WTE
ER160xCT
ER1600CT – ER1606CT 4 of 4 © 2006 Won-Top Electronics
ORDERING INFORMATION
Product No. Package Type Shipping Quantity
ER1600CT TO-220 50 Units/Tube
ER1601CT TO-220 50 Units/Tube
ER1601ACT TO-220 50 Units/Tube
ER1602CT TO-220 50 Units/Tube
ER1603CT TO-220 50 Units/Tube
ER1604CT TO-220 50 Units/Tube
ER1606CT TO-220 50 Units/Tube
1. Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
2. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix
to p art number above. For example, ER1600CT-LF.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer . WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http://www. wontop.com