N-Channel QFET(R) MOSFET 600 V, 7.5 A, 1.2 Features * 7.5 A, 600 V, RDS(on) = 1.2 (Max.) @ VGS = 10 V, ID = 3.75 A Description This N-Channel enhancement mode power MOSFET is * Low Gate Charge (Typ. 28 nC) produced using ON Semiconductor's proprietary planar * Low Crss (Typ. 12 pF) stripe and DMOS technology. This advanced MOSFET technology has been especially tailored to reduce on-state * 100% Avalanche Tested resistance, and to provide superior switching performance and high avalanche energy strength. These devices are * RoHS Compliant suitable for switched mode power supplies, active power factor correction (PFC), and electronic lamp ballasts. D D G S G G DS D2-PAK I2-PAK S Absolute Maximum Ratings Symbol VDSS ID TC = 25C unless otherwise noted. Parameter Drain-Source Voltage - Continuous (TC = 25C) Drain Current FQB8N60CTM / FQI8N60CTU 600 Unit V 7.5 A - Continuous (TC = 100C) IDM Drain Current - Pulsed (Note 1) 4.6 A 30 A VGSS Gate-Source Voltage EAS Single Pulsed Avalanche Energy (Note 2) IAR Avalanche Current (Note 1) 7.5 A EAR Repetitive Avalanche Energy Peak Diode Recovery dv/dt Power Dissipation (TA = 25C)* (Note 1) 14.7 4.5 3.13 mJ V/ns W 147 1.18 -55 to +150 W W/C C 300 C dv/dt PD Power Dissipation (TC = 25C) TJ, TSTG TL (Note 3) - Derate above 25C Operating and Storage Temperature Range Maximum Lead Temperature for Soldering, 1/8" from Case for 5 Seconds. 30 V 230 mJ Thermal Characteristics Symbol RJC RJA FQB8N60CTM / FQI8N60CTU Parameter 0.85 Thermal Resistance, Junction to Case, Max. Thermal Resistance, Junction to Ambient (Minimum Pad of 2-oz Copper), Max. 2 Thermal Resistance, Junction to Ambient (*1 in Pad of 2-oz Copper), Max. (c)2003 Semiconductor Components Industries, LLC. October-2017,Rev.3 Unit 62.5 oC/W 40 Publication Order Number: FQI8N60C/D FQB8N60C / FQI8N60C -- N-Channel QFET(R) MOSFET FQB8N60C / FQI8N60C Part Number FQB8N60CTM Top Mark FQB8N60C Package D2-PAK Packing Method Tape and Reel Reel Size 330 mm Tape Width 24 mm Quantity 800 units FQI8N60CTU FQI8N60C I2-PAK Tube N/A N/A 50 units Electrical Characteristics Symbol TC = 25C unless otherwise noted. Parameter Test Conditions Min. Typ. Max. Unit 600 -- -- V Off Characteristics BVDSS Drain-Source Breakdown Voltage VGS = 0 V, ID = 250 A BVDSS / TJ Breakdown Voltage Temperature Coefficient ID = 250 A, Referenced to 25C -- 0.7 -- V/C VDS = 600 V, VGS = 0 V 1 A IDSS Zero Gate Voltage Drain Current -- -- VDS = 480 V, TC = 125C -- -- 10 A IGSSF Gate-Body Leakage Current, Forward VGS = 30 V, VDS = 0 V -- -- 100 nA IGSSR Gate-Body Leakage Current, Reverse VGS = -30 V, VDS = 0 V -- -- -100 nA On Characteristics VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 A 2.0 -- 4.0 V RDS(on) Static Drain-Source On-Resistance VGS = 10 V, ID = 3.75 A -- 1.0 1.2 gFS Forward Transconductance VDS = 40 V, ID = 3.75 A -- 8.7 -- S VDS = 25 V, VGS = 0 V, f = 1.0 MHz -- 965 1255 pF -- 105 135 pF -- 12 16 pF -- 16.5 45 ns ns Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Switching Characteristics td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge VDD = 300 V, ID = 7.5A, RG = 25 (Note 4) VDS = 480 V, ID = 7.5A, VGS = 10 V (Note 4) -- 60.5 130 -- 81 170 ns -- 64.5 140 ns -- 28 36 nC -- 4.5 -- nC -- 12 -- nC 7.5 A A Drain-Source Diode Characteristics and Maximum Ratings IS Maximum Continuous Drain-Source Diode Forward Current -- -- ISM Maximum Pulsed Drain-Source Diode Forward Current VGS = 0 V, IS = 7.5 A Drain-Source Diode Forward Voltage -- -- 30 VSD -- -- 1.4 V trr Reverse Recovery Time -- 365 -- ns Qrr Reverse Recovery Charge VGS = 0 V, IS = 7.5 A, dIF / dt = 100 A/s -- 3.4 -- C Notes: 1. Repetitive rating : pulse-width limited by maximum junction temperature. 2.L = 7.3 mH, IAS = 7.5 A, VDD = 50 V, RG = 25 , starting TJ = 25C. 3.I SD 7.5 A, di/dt 200 A/s , VDD BVDSS, starting TJ = 25C. 4. Essentially independent of operating temperature. www.onsemi.com 2 FQB8N60C / FQI8N60C -- N-Channel QFET(R) MOSFET Package Marking and Ordering Information VGS 15.0 V 10.0 V 8.0 V 7.0 V 6.5 V 6.0 V 5.5 V Bottom : 5.0 V Top : ID, Drain Current [A] 1 10 o ID, Drain Current [A] 1 10 0 10 150 C o 25 C Notes : 1. VDS = 40V 2. 250 s Pulse Test Notes : 1. 250 s Pulse Test 2. TC = 25 -1 10 -1 10 -1 0 10 2 1 10 o -55 C 0 10 10 4 8 6 10 VGS, Gate-Source Voltage [V] VDS, Drain-Source Voltage [V] Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 3.5 1 10 IDR, Reverse Drain Current [A] RDS(ON) [ ], Drain-Source On-Resistance 3.0 VGS = 10V 2.5 2.0 1.5 VGS = 20V 1.0 0 10 150 Note : TJ = 25 -1 0.5 0 5 10 15 20 10 0.2 0.4 ID, Drain Current [A] 2000 Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd 1800 0.6 Coss 800 Notes ; 1. VGS = 0 V 2. f = 1 MHz 600 Crss 400 1.4 VDS = 120V VDS = 300V 8 VDS = 480V 6 4 2 Note : ID = 8A 200 0 -1 10 1.2 12 VGS, Gate-Source Voltage [V] Ciss 1200 1000 1.0 Figure 4. Body Diode Forward Voltage Variation with Source Current and Temperature 10 1600 1400 0.8 VSD, Source-Drain voltage [V] Figure 3. On-Resistance Variation vs Drain Current and Gate Voltage Capacitance [pF] Notes : 1. VGS = 0V 2. 250s Pulse Test 25 0 0 10 1 10 0 5 Figure 5. Capacitance Characteristics 10 15 20 25 30 QG, Total Gate Charge [nC] VDS, Drain-Source Voltage [V] Figure 6. Gate Charge Characteristics www.onsemi.com 3 FQB8N60C / FQI8N60C -- N-Channel QFET(R) MOSFET ! (Continued) 1.2 3.0 RDS(ON) , (Normalized) Drain-Source On-Resistance BV DSS , (Normalized) Drain-Source Breakdown Voltage 2.5 1.1 1.0 0.9 Notes : 1. VGS = 0 V 2. ID = 250 A 0.8 -100 -50 0 50 100 150 2.0 1.5 1.0 Notes : 1. VGS = 10 V 2. ID = 4 A 0.5 0.0 -100 200 -50 50 100 150 200 o TJ, Junction Temperature [ C] Figure 7. Breakdown Voltage Variation vs Temperature Figure 8. On-Resistance Variation vs Temperature 2 10 8 Operation in This Area is Limited by R DS(on) 10 s 100 s 1 10 6 1 ms 10 ms 100 ms ID, Drain Current [A] ID, Drain Current [A] 0 TJ, Junction Temperature [ C] o DC 0 10 4 -1 10 2 Notes : o 1. TC = 25 C o 2. TJ = 150 C 3. Single Pulse -2 10 0 1 10 2 10 0 25 3 10 10 50 VDS, Drain-Source Voltage [V] ZJC(t), Thermal Response [oC/W] 100 125 Figure 10. Maximum Drain Current vs Case Temperature Figure 9. Maximum Safe Operating Area 10 75 TC, Case Temperature [] 0 D = 0 .5 0 .2 10 -1 0 .1 0 .0 5 N o te s : 1 . Z J C ( t) = 0 . 8 5 /W M a x . 2 . D u t y F a c to r, D = t 1 /t 2 3 . T J M - T C = P D M * Z J C ( t) 0 .0 2 0 .0 1 10 PDM s in g le p u ls e -2 t1 t2 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 t 1 , S q u a re W a v e P u ls e D u ra tio n [s e c ] Figure 11. Transient Thermal Response Curve www.onsemi.com 4 10 1 150 FQB8N60C / FQI8N60C -- N-Channel QFET(R) MOSFET Typical Characteristics FQB8N60C / FQI8N60C -- N-Channel QFET(R) MOSFET 200nF 12V VGS Same Type as DUT 50K Qg 10V 300nF VDS VGS Qgs Qgd DUT IG = const. 3mA Charge Figure 12. Gate Charge Test Circuit & Waveform VDS RG RL VDS 90% VDD VGS VGS DUT V 10V GS 10% td(on) tr td(off) t on t off tf Figure 13. Resistive Switching Test Circuit & Waveforms VDS BVDSS 1 EAS = ---- L IAS2 -------------------2 BVDSS - VDD L BVDSS IAS ID RG V 10V GS GS VDD DUT ID (t) VDS (t) VDD tp tp Figure 14. Unclamped Inductive Switching Test Circuit & Waveforms www.onsemi.com 5 Time + VDS _ I SD L Driver RG VGS VGS ( Driver ) I SD ( DUT ) Same Type as DUT VDD * dv/dt controlled by RG * ISD controlled by pulse period Gate Pulse Width D = -------------------------Gate Pulse Period 10V IFM , Body Diode Forward Current di/dt IRM Body Diode Reverse Current VDS ( DUT ) Body Diode Recovery dv/dt VSD VDD Body Diode Forward Voltage Drop Figure 15. Peak Diode Recovery dv/dt Test Circuit & Waveforms www.onsemi.com 6 FQB8N60C / FQI8N60C -- N-Channel QFET(R) MOSFET DUT FQB8N60C / FQI8N60C -- N-Channel QFET(R) MOSFET Mechanical Dimensions Figure 16. TO263 (D2PAK), Molded, 2-Lead, Surface Mount Package drawings are provided as a service to customers considering ON Semiconductor components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a ON Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of ON Semiconductor's worldwide terms and conditions, specif-ically the warranty therein, which covers ON Semiconductor products. www.onsemi.com 7 FQB8N60C / FQI8N60C -- N-Channel QFET(R) MOSFET Mechanical Dimensions Figure 17. TO262 (I2PAK), Molded, 3-Lead, Jedec Variation AA Package drawings are provided as a service to customers considering ON Semiconductor components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a ON Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of ON Semiconductor's worldwide terms and conditions, specif-ically the warranty therein, which covers ON Semiconductor products. www.onsemi.com 8 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com