3
9
Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
△
！当社カタログをご使用の際には「当社製品に関するお断り」を必ずお読みください。△
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
1
INFORMATION ON THE GENERAL CATALOG
REMINDERS
■ Product information in this catalog is as of October 2008. All of the contents specified herein are
subject to change without notice due to technical improvements, etc. Therefore, please check for the
latest information carefully before practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment
incorporating such products, which are caused under the conditions other than those specified in this
catalog or individual specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual
specification is available.
■ Please conduct validation and verification of products in actual condition of mounting and operating
environment before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and
intended for use in general electronics equipment.(for AV, office automation, household, office supply,
information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the
components or devices into any equipment in the field such as transportation,( automotive control, train
control, ship control), transportation signal, disaster prevention, medical, public information network
(telephone exchange, base station) etc. which may have direct influence to harm or injure a human
body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear
control, submarine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic
equipment, if the equipment or the electric circuit require high safety or reliability function or
performances, a sufficient reliability evaluation check for safety shall be performed before commercial
shipment and moreover, due consideration to install a protective circuit is strongly recommended at
customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices
or distributors (so called TAIYO YUDENs official sales channel).
It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that
may occur in connection with a third party's intellectual property rights and other related rights arising
from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to Foreign
Exchange and Foreign Trade Control Law of Japan, U.S. Export Administration Regulations, and
other applicable regulations. Should you have any question or inquiry on this matter, please contact our
sales staff.
Should you have any question or inquiry on this matter, please contact our sales staff.
472 △
！当社カタログをご使用の際には「当社製品に関するお断り」を必ずお読みください。△
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
TBPS1S103K440H5Q ○
12
3
456
78910
11
形名表記法 ORDERING CODE
用途 APPLICATIONS
特長 FEATURES
F ±1
H ±3
F
G
H
J
K
± 1
± 2
± 3
± 5
±10
F ±1
H ±3
F
G
H
J
K
± 1
± 2
± 3
± 5
±10
・125℃保証
・B定数が大きく温度検知能力が優れている
・表裏の区別がなくバルク、テーピングでの自動装着が可能
・寸法はEIAJ規格に準拠
・内部電極構造を採用することにより、信頼性向上を実現しています
積層チップNTCサーミスタ
MULTILAYER CHIP NTC THERMISTORS
・通信機用
自動車電話、携帯電話、コードレス電話ほか
・OA機器用
プリンタ、ファクシミリ、ワードプロセッサほか
・民生機器用
ビデオ、カラーテレビ、液晶テレビ、CDプレーヤほか
・バッテリ保護回路用
OPERATING TEMP. ー55〜＋125℃
・Guaranteed up to 125℃.
・Large B constant for higher temperature sensing capability.
・Ideal for automatic mounting in bulk or from tapes because of front-rear
symmetry.
・Available in a standard EIA compatible case size.
・Improved reliability due to use of internal electrodes.
・Telecommunications equipment：mobile telephones,cellular telephones,
cordless telephones, etc.
・Office automation：printers, facsimiles, word processors, etc.
・Consumer electronics ：VCRs, color television sets, LCD television sets,
CD players, etc.
・Battery protection circuit
△ 標準品
△＝スペース
1
TB NTCサーミスタ
形式
3
寸法［mm］
S0
S1
1.0×0.5（0402）
1.6×0.8（0603）
5
公称零負荷抵抗［Ω］
6
1000
150000
B定数許容差［％］
8
7
公称B定数［K］
当社管理記号
11
最高温度［℃］
10
Q 125
例
295
410
記号×10
2950
4100
抵抗許容差［％］
例
102
154
9
5 ー55
最低温度［℃］
4
包装
R
S
紙テーピング
単品（袋づめ）
2
P メッキ電極品
形状
△ Standard product
△＝Blank space
1
TB NTC THERMISTOR
Type
3
Dimension［mm］
S0
S1
1.0×0.5（0402）
1.6×0.8（0603）
5
Nominal Zero-Power Resistance［Ω］
6
1000
150000
B constant tolerance［％］
8
7
Nominal B constant［K］
Internal code
11
Max. temperature［℃］
10
Q 125
example
295
410
Symbol×10
2950
4100
Resistance tolerance［％］
example
102
154
9
5 ー55
Min. temperature［℃］
4
Packaging
R
S
Tape&Reel
Bulk
2
P Plated terminal
Shape
＊1005TYPEを除く
＊Except for 1005TYPE
THERMISTORS
9
473
△
！当社カタログをご使用の際には「当社製品に関するお断り」を必ずお読みください。△
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
P.474 P.475 P.476 P.478P.16
etc
外形寸法 EXTERNAL DIMENSIONS
Type L W T e
R-T特性図 R-T CHARACTERISTICS
1.6±0.15
（0.063±0.006）
0.8±0.15
（0.031±0.006）
0.8±0.15
（0.031±0.006）
0.35±0.25
（0.014±0.010）
1608 （0603）
仕様 SPECIFICATIONS
Unit：mm （Inch）
1005type（0402）
アイテム一覧
Part Numbers
特性図
Electrical Characteristics
梱包
Packaging
信頼性
Reliability Data
使用上の注意
Precautions
セレクションガイド
Selection Guide
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
R25
B定数
B Constant
許容差（記号）Tolerance （Symbols）
±1%（F）, ±2%（G）, ±3%（H）, ±5%（J）, ±10%（K）
±1%（F）, ±3% （H）
1.0±0.05
（0.039±0.002）
0.5±0.05
（0.020±0.002）
0.5±0.05
（0.020±0.002）
0.25±0.10
（0.010±0.004）
1005 （0402）
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
1608type（0603）
※営業窓口に御相談ください。Please contact our Sales Department.
※
474 △
！当社カタログをご使用の際には「当社製品に関するお断り」を必ずお読みください。△
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
アイテム一覧 PART NUMBERS
1005TYPE
≦3 sec 0.5〜2.0
mW/℃35mW
4100
4100
4100
4100
4100
4100
4400
4550
4550
4550
4550
4550
熱放散定数
Dissipation
factor
熱時定数
Thermal time
constant
（K：25/85℃）
R25
[kΩ]
形 名
Ordering Code
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
定格電力
Rated Power
形名の○には包装 （R＝テーピング、S＝単品）、△には抵抗許容差記号（J,K） が入ります。
○Please specify the packaging code（R：tape & reel, S：Bulk）and △ the resistance tolerance code（J, K）.
備 考
Remark
1608TYPE
≦5 sec 1.0〜2.5
mW/℃63mW
2950
2950
3150
3150
4100
4100
4100
4100
4100
4100
4100
4100
4400
4400
4400
4600
4600
4600
4750
4750
4750
4750
3435
熱放散定数
Dissipation
factor
熱時定数
Thermal time
constant
R25
[kΩ]
形 名
Ordering Code
0.047
0.068
0.100
0.150
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
10
定格電力
Rated Power
形名の○には包装 （R＝テーピング、S＝単品）、△には抵抗値許容差記号（J, K（TBP S1 ○ 103 △ 344 F 5QはF,GまたはH））が入ります。
○Please specify the packaging code（R：tape & reel, S：Bulk）and △ the resistance tolerance code （F,G or H for TBP S1 ○ 103 △ 344 F 5Q J, K for
other part numbers）.
備 考
Remark
T B P S 0 ○ 2 2 2
△
4 1 0 H 5 Q
T B P S 0 ○ 3 3 2
△
4 1 0 H 5 Q
T B P S 0 ○ 4 7 2
△
4 1 0 H 5 Q
T B P S 0 ○ 6 8 2
△
4 1 0 H 5 Q
T B P S 0 ○ 1 0 3
△
4 1 0 H 5 Q
T B P S 0 ○ 1 5 3
△
4 1 0 H 5 Q
T B P S 0 ○ 2 2 3
△
4 4 0 H 5 Q
T B P S 0 ○ 3 3 3
△
4 5 5 H 5 Q
T B P S 0 ○ 4 7 3
△
4 5 5 H 5 Q
T B P S 0 ○ 6 8 3
△
4 5 5 H 5 Q
T B P S 0 ○ 1 0 4
△
4 5 5 H 5 Q
T B P S 0 ○ 1 5 4
△
4 5 5 H 5 Q
T B P S 1 ○ 4 7 0
△
2 9 5 H 5 Q
T B P S 1 ○ 6 8 0
△
2 9 5 H 5 Q
T B P S 1 ○ 1 0 1
△
3 1 5 H 5 Q
T B P S 1 ○ 1 5 1
△
3 1 5 H 5 Q
T B P S 1 ○ 2 2 1
△
4 1 0 H 5 Q
T B P S 1 ○ 3 3 1
△
4 1 0 H 5 Q
T B P S 1 ○ 4 7 1
△
4 1 0 H 5 Q
T B P S 1 ○ 6 8 1
△
4 1 0 H 5 Q
T B P S 1 ○ 1 0 2
△
4 1 0 H 5 Q
T B P S 1 ○ 1 5 2
△
4 1 0 H 5 Q
T B P S 1 ○ 2 2 2
△
4 1 0 H 5 Q
T B P S 1 ○ 3 3 2
△
4 1 0 H 5 Q
T B P S 1 ○ 4 7 2
△
4 4 0 H 5 Q
T B P S 1 ○ 6 8 2
△
4 4 0 H 5 Q
T B P S 1 ○ 1 0 3
△
4 4 0 H 5 Q
T B P S 1 ○ 1 5 3
△
4 6 0 H 5 Q
T B P S 1 ○ 2 2 3
△
4 6 0 H 5 Q
T B P S 1 ○ 3 3 3
△
4 6 0 H 5 Q
T B P S 1 ○ 4 7 3
△
4 7 5 H 5 Q
T B P S 1 ○ 6 8 3
△
4 7 5 H 5 Q
T B P S 1 ○ 1 0 4
△
4 7 5 H 5 Q
T B P S 1 ○ 1 5 4
△
4 7 5 H 5 Q
T B P S 1 ○ 1 0 3
△
3 4 4 F 5 Q
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
EHS
（Environmental
Hazardous
Substances）
B定数
B constant
4034
4034
4034
4034
4034
4034
4336
4483
4483
4483
4483
4483
（K：25/50℃）
B定数
B constant
（K：25/50℃）（K：25/85℃）
2934
2934
3157
3157
4034
4034
4034
4034
4034
4034
4034
4034
4336
4336
4336
4533
4533
4533
4642
4642
4642
4642
3395
THERMISTORS
9
475
△
！当社カタログをご使用の際には「当社製品に関するお断り」を必ずお読みください。△
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
特性図 ELECTRICAL CHARACTERISTICS
高温放置 High Temperature Life Test
耐湿性 Damp Heat（steady state）
試験条件 Test Condition 85℃95%
試験条件 Test Condition 125℃
高温放置 High Temperature Life Test
耐湿性 Damp Heat（steady state）
試験条件 Test Condition 85℃95%
試験条件 Test Condition 125℃
1005type（0402）
1608type（0603）
476 △
！当社カタログをご使用の際には「当社製品に関するお断り」を必ずお読みください。△
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
2.0±0.5
（0.079±0.031）
φ13.0±0.2
（0.512±0.020）
梱包 PACKAGING
③テーピング寸法 Taping Dimensions
標準数量 Standard quantity ［pcs］
形 式
Type
製品厚み
Thickness
［mm］袋づめ Bulk
10000
2000
0.5（0.020）
0.8（0.031）
紙テープ Taping
10000
4000
④リーダー部・空部 Leader and Blank portion
⑤リール寸法 Reel size
⑥トップテープ強度 Top Tape Strength
トップテープのはがし力は下図矢印方向にて0.1〜0.7Nとなります。
The top tape requires a peel;-off force of 0.1〜0.7N in the direction of the
arrow as illustrated below.
Unit：mm （Inch）
①最小受注単位数 Minimum Quantity
1005 （0402）
1608 （0603）
紙テープ（8mm幅） Paper tape（0.315inches wide）
チップ挿入部 挿入ピッチ テープ厚み
形 式 Chip cavity
Insertion pitch
Tape thickness
A B F T
1005（0402）
0.65±0.1 1.15±0.1 2.0±0.05 0.8max
（0.026±0.004）
（0.045±0.004） （0.079±0.002）
（0.031max）
1608（0603）
1.0±0.2 1.8±0.2 4.0±0.1 1.1max
（0.039±0.008）
（0.071±0.008） （0.157±0.004）
（0.043max）
Unit：mm（Inch）
160mm以上
（6.3inches or more
）
引き出し方向
Direction of tape feed
100mm以上
（3.94inches or more）
400mm以上
（15.7inches or more）
②テーピング材質 Tape material
Type
479
THERMISTORS
9
△
！当社カタログをご使用の際には「当社製品に関するお断り」を必ずお読みください。△
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
Item
Specified Value
Test Methods and Remarks
Applied force：5N
Duration：10sec.
MULTILAYER CHIP NTC THERMISTORS
1. Operating Temperature Range
2. Storage Temperature Range
3. Rated Power
4. Nominal Zero-Power Resistance
5. Nominal B Constant
6. Dissipation Constant（single unit）
7. Thermal Time Constant（single unit）
8. Rated Ambient Temperature
9. Electric Power Derating Curve
10. Resistance to Flexure of Substrate
11. Adhesion of Terminal Electrode
Ambient temperature：25±0.2℃
Measuring electric power：0.1mW max.
Measure the resistance at the ambient temperatures of 25±0.2℃ and ＋85±0.2℃.
This represents the amount of electric power required to raise the temperature
of the element by 1℃ through self-heating under thermal equilibrium.
This represents the amount of time for the temperature of the thermistor element
to change by 63.2％ of the difference between the initial temperature and the
ambient temperature by the drastic change of power application into thermistor
from non-zero-power to zero-power state.
This represents the maximum ambient temperature at which rated power could be applied.
This represents the relations between the ambient temperature and the maxi-
mum permissible power.
R25 change：Within ±5％
B constant change：
Within ±2％
ー55 to ＋125℃
ー55 to ＋125℃
35mW 63mW
2.2〜150kΩ 0.047〜150kΩ
±5％ ±5％
±10％ ±10％
4100〜4550K 2950〜4750K
±3％ ±3％
0.5 to 2.0mW／℃ 1.0 to 2.5mW／℃
Within 3 sec. Within 5 sec.
25℃
As shown in the figure at right.
R25 change：Within ±5％
B constant change：
Within ±2％
Warp：2mm
Testing board：glass-epoxy-resin substrate
Board thickness：0.8mm
Pressing speed：0.5mm／sec.
Duration：30 sec.
1/2
1005（0402） 1608（0603）
R25 change：Within ±3％
B constant change：
Within ±1％
R25 change：Within ±3％
B constant change：
Within ±1％
RELIABILITY DATA
481
THERMISTORS
9
△
！当社カタログをご使用の際には「当社製品に関するお断り」を必ずお読みください。△
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
Note on standard condition："standard condition" referred to herein is defined as follows：
5 to 35℃ of temperature, 45 to 85％ relative humidity and 86 to 106kPa of air pressure.
When there are questions concerning measurement results：
In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70％ relative humidity and 86 to 106kPa of air pressure.
Unless otherwise specified, all the tests are conducted under the "standard condition."
Item
Specified Value
Test Methods and Remarks
At least 80% of terminal
electrode is covered by new
solder.
R25 change：Within ±5％
B constant change：
Within ±2％
R25 change： Within ±5％
B Constant change：
Within ±3％
According to JIS C5102 clause 8.4.
Solder temperature：230±5℃
Duration：4±1 sec.
Reflow soldering：
Solder temperature：240℃
Duration：5 sec.
Preheating temperature：150℃
Preheating time：90 sec.
Number of reflows：3 times
testing substrate：glass-epoxy-resin substrate
Conditions for 1 cycle
Step1：Minimum operating temperature ＋0／ー3℃ 30±3 min
Step2：Room temperature 2 to 3 min
Step3：Maximum operating temperature ＋0／ー3℃ 30±3 min
Step4：Room temperature 2 to 3 min
Number of cycles：5
Recovery：2 to 3 hrs of recovery under the standard condition after the test.
Temperature：125±2℃
Duration：1000±12 hrs
Recovery：2 hrs of recovery under the standard condition after the removal
from test chamber.
testing substrate：glass-epoxy-resin substrate
Temperature：85±2℃
Humidity：85±5％RH
Duration：1000±12 hrs
Recovery：2 hrs of recovery under the standard condition after the removal
from test chamber.
testing substrate：glass-epoxy-resin substrate
12. Solderability
13. Resistance to Soldering
14. Thermal Shock
15. High Temperature Life Test
16. Damp Heat（steady state）
R25 change： Within ±5％
B Constant change：
Within ±3％
R25 change： Within ±5％
B Constant change：
Within ±3％
2/2
MULTILAYER CHIP NTC THERMISTORS
1005（0402） 1608（0603）
At least 75% of terminal
electrode is covered by new
solder.
R25 change：Within ±3％
B constant change：
Within ±1％
R25 change： Within ±3％
B Constant change：
Within ±1％
R25 change： Within ±3％
B Constant change：
Within ±1％
R25 change： Within ±3％
B Constant change：
Within ±1％
RELIABILITY DATA
