SUP70030E www.vishay.com Vishay Siliconix N-Channel 100 V (D-S) MOSFET FEATURES TO-220AB * TrenchFET(R) power MOSFET * Maximum 175 C junction temperature * Very low Qgd reduces power loss from passing through Vplateau * 100 % Rg and UIS tested * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Top View G D S APPLICATIONS D * Power supply - Secondary synchronous rectification PRODUCT SUMMARY * DC/DC converter VDS (V) 100 RDS(on) max. () at VGS = 10 V 0.00318 RDS(on) max. () at VGS = 7.5 V 0.00384 Qg typ. (nC) 142.4 ID (A) 150 d Configuration Single * Power tools G * Motor drive switch * DC/AC inverter * Battery management S * OR-ing / e-fuse N-Channel MOSFET ORDERING INFORMATION Package TO-220 Lead (Pb)-free and halogen-free SUP70030E-GE3 ABSOLUTE MAXIMUM RATINGS (TC = 25 C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-source voltage VDS 100 Gate-source voltage VGS 20 Continuous drain current (TJ = 150 C) TC = 25 C TC = 70 C Pulsed drain current (t = 100 s) ID IDM Avalanche current Single avalanche energy a L = 0.1 mH TC = 25 C Maximum power dissipation a TC = 125 C Operating junction and storage temperature range V 150 d 150 d 500 IAS 60 EAS 180 PD UNIT 375 b 125 b A mJ W TJ, Tstg -55 to +175 C SYMBOL LIMIT UNIT THERMAL RESISTANCE RATINGS PARAMETER Junction-to-ambient (PCB mount) c Junction-to-case (drain) RthJA 40 RthJC 0.4 C/W Notes a. Duty cycle 1 % b. See SOA curve for voltage derating c. When mounted on 1" square PCB (FR4 material) d. Package limited S18-1020-Rev. A, 08-Oct-2018 Document Number: 76678 1 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SUP70030E www.vishay.com Vishay Siliconix SPECIFICATIONS (TJ = 25 C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-source breakdown voltage VDS VGS = 0 V, ID = 250 A 100 - - VGS(th) VDS = VGS, ID = 250 A 2 - 4 Gate-body leakage IGSS VDS = 0 V, VGS = 20 V - - 250 VDS = 100 V, VGS = 0 V - - 1 Zero gate voltage drain current IDSS VDS = 100 V, VGS = 0 V, TJ = 125 C - - 150 VDS = 100 V, VGS = 0 V, TJ = 175 C - - 5 mA VDS 10 V, VGS = 10 V 120 - - A VGS = 10 V, ID = 30 A - 0.00265 0.00318 VGS = 7.5 V, ID = 20 A - 0.00320 0.00384 VDS = 15 V, ID = 30 A - 110 - - 10 870 - VGS = 0 V, VDS = 50 V, f = 1 MHz - 820 - - 40 - Gate threshold voltage On-state drain current a Drain-source on-state resistance a Forward transconductance a ID(on) RDS(on) gfs V nA A S Dynamic b Input capacitance Ciss Output capacitance Coss Reverse transfer capacitance Crss Total gate charge c Qg Gate-source charge c Gate-drain charge c Qgs VDS = 50 V, VGS = 10 V, ID = 20 A Qgd - 142.4 214 - 46.8 - - 18.5 - pF nC Output charge Qoss VDS = 50 V, VGS = 0 V - 138 207 Gate resistance Rg f = 1 MHz 0.34 1.7 3.4 - 30 60 - 13 26 - 50 100 - 15 30 - - 250 A - 0.8 1.5 V c td(on) c tr Turn-off delay time c td(off) Turn-on delay time Rise time Fall time c VDD = 50 V, RL = 3 ID 10 A, VGEN = 10 V, Rg = 1 tf ns Drain-Source Body Diode Ratings and Characteristics b (TC = 25 C) Pulsed current (t = 100 s) Forward voltage a Reverse recovery time Peak reverse recovery charge ISM VSD IF = 10 A, VGS = 0 V trr - 76 150 ns IRM(REC) - 4.6 5.6 A C IF = 34 A, di/dt = 100 A/s Reverse recovery charge Qrr - 0.205 0.24 Reverse recovery fall time ta - 52 - Reverse recovery rise time tb - 24 - ns Notes a. Pulse test; pulse width 300 s, duty cycle 2 % b. Guaranteed by design, not subject to production testing c. Independent of operating temperature Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S18-1020-Rev. A, 08-Oct-2018 Document Number: 76678 2 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SUP70030E www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise noted) Axis Title Axis Title 10000 200 10000 100 VGS = 10 V thru 6 V VGS = 5 V 100 50 1000 60 1st line 2nd line 100 2nd line ID - Drain Current (A) 1000 1st line 2nd line 2nd line ID - Drain Current (A) 80 150 40 100 TC = 25 C 20 VGS = 4 V 10 0 0 1 2 3 TC = -55 C TC = 125 C 10 0 4 0 1.6 3.2 4.8 6.4 VDS - Drain-to-Source Voltage (V) VGS - Gate-to-Source Voltage (V) Output Characteristics Transfer Characteristics 8 Axis Title Axis Title 10000 150 10000 0.005 1000 TC = 125 C 60 100 30 10 60.0 0 0 10.0 20.0 30.0 40.0 50.0 0.003 VGS = 10 V 100 0.002 10 0.001 0 50 Transconductance On-Resistance vs. Drain Current Coss 1000 Crss 100 10 10 40 60 80 100 2nd line VGS - Gate-to-Source Voltage (V) ID = 20 A 1st line 2nd line 2nd line C - Capacitance (pF) 10000 10 Ciss 1000 8 1000 6 VDS = 25 V, 50 V, 80 V 4 100 2 10 0 0 30 60 90 120 VDS - Drain-to-Source Voltage (V) Qg - Total Gate Charge (nC) Capacitance Gate Charge S18-1020-Rev. A, 08-Oct-2018 200 Axis Title 10 000 20 150 ID - Drain Current (A) 10000 0 100 ID - Drain Current (A) Axis Title 100 1000 VGS = 7.5 V 1st line 2nd line 90 0.004 1st line 2nd line TC = 25 C 2nd line RDS(on) - On-Resistance () 120 1st line 2nd line 2nd line gfs - Transconductance (S) TC = -55 C 150 Document Number: 76678 3 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SUP70030E www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise noted) Axis Title Axis Title 10000 10000 100 VGS = 10 V, 30 A 1.7 1.3 100 VGS = 7.5 V, 20 A 0.9 -50 -25 0 25 50 1000 TJ = 150 C TJ = 25 C 1 100 0.1 0.01 10 0.5 10 10 0 75 100 125 150 175 0.2 0.4 0.6 0.8 1.0 1.2 TJ - Junction Temperature (C) VSD - Source-to-Drain Voltage (V) On-Resistance vs. Junction Temperature Source Drain Diode Forward Voltage Axis Title Axis Title 10000 0.010 10000 3.5 ID = 30 A ID = 250 A 0.008 TJ = 125 C 0.004 TJ = 25 C 1000 2.5 1st line 2nd line 1000 0.006 2nd line VGS(th) (V) 3.0 1st line 2nd line 2nd line RDS(on) - On-Resistance () 1st line 2nd line 1000 2nd line IS - Source Current (A) 2.1 1st line 2nd line 2nd line RDS(on) - On-Resistance (Normalized) 2.5 2.0 100 100 1.5 0.002 4 6 8 10 1.0 10 0 -50 -25 10 0 25 50 75 100 125 150 175 VGS - Gate-to-Source Voltage (V) TJ - Junction Temperature (C) On-Resistance vs. Gate-to-Source Voltage Threshold Voltage Axis Title Axis Title 10000 117 10000 250 111 100 108 1000 150 1st line 2nd line 1000 2nd line ID - Drain Current (A) 200 114 1st line 2nd line 2nd line VDS - Drain-to-Source Voltage (V) ID = 250 A Package limited 100 100 50 10 105 -50 -25 0 25 50 75 100 125 150 175 10 0 0 25 50 75 100 125 TJ - Junction Temperature (C) TC - Case Temperature (C) Drain Source Breakdown vs. Junction Temperature Current De-rating S18-1020-Rev. A, 08-Oct-2018 150 175 Document Number: 76678 4 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SUP70030E www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 C, unless otherwise noted) Axis Title 1000 100 10000 100 1st line 2nd line 1000 100 s Limited by RDS(on) a 10 100 1 ms TC = 25 C, single pulse BVDSS limited 10 ms DC, 10 s, 1s, 100 ms 1 0.1 1 10 100 10 1000 2nd line IDAV - Drain Current Avalanche (A) 2nd line ID - Drain Current (A) IDM limited 10 0.00001 0.0001 0.001 0.01 t - Time (s) VDS - Drain-to-Source Voltage (V) Safe Operating Area Note a. VGS > minimum VGS at which RDS(on) is specified 25 C 150 C Single Pulse Avalanche Current Capability vs. Time 1 Duty Cycle = 0.5 Normalized Effective Transient Thermal Impedance 0.2 Notes: 0.1 0.1 PDM 0.05 0.02 t1 t2 1. Duty Cycle, D = t1 t2 2. Per Unit Base = RthJA = 62.5 C/W Single Pulse 3. TJM - TA = PDMZthJA(t) 4. Surface Mounted 0.01 10 -4 10-3 10-2 Square Wave Pulse Duration (s) 10-1 1 Normalized Thermal Transient Impedance, Junction-to-Case Note * The characteristics shown in the two graphs - Normalized Transient Thermal Impedance Junction to Ambient (25 C) - Normalized Transient Thermal Impedance Junction to Case (25 C) are given for general guidelines only to enable the user to get a "ball park" indication of part capabilities. The data are extracted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities can widely vary depending on actual pplication parameters and operating conditions Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and reliability data, see www.vishay.com/ppg?76678. S18-1020-Rev. A, 08-Oct-2018 Document Number: 76678 5 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix TO-220AB MILLIMETERS A E F D H(1) Q OP 3 2 L(1) 1 M* L b(1) INCHES DIM. MIN. MAX. MIN. MAX. A 4.25 4.65 0.167 0.183 b 0.69 1.01 0.027 0.040 b(1) 1.20 1.73 0.047 0.068 c 0.36 0.61 0.014 0.024 D 14.85 15.49 0.585 0.610 D2 12.19 12.70 0.480 0.500 E 10.04 10.51 0.395 0.414 e 2.41 2.67 0.095 0.105 e(1) 4.88 5.28 0.192 0.208 F 1.14 1.40 0.045 0.055 H(1) 6.09 6.48 0.240 0.255 0.115 J(1) 2.41 2.92 0.095 L 13.35 14.02 0.526 0.552 L(1) 3.32 3.82 0.131 0.150 OP 3.54 3.94 0.139 0.155 Q 2.60 3.00 0.102 0.118 ECN: T14-0413-Rev. P, 16-Jun-14 DWG: 5471 Note * M = 1.32 mm to 1.62 mm (dimension including protrusion) Heatsink hole for HVM C b e J(1) e(1) D2 Document Number: 71195 1 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revison: 16-Jun-14 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000