91212 TKIM/71504 VB TSIM TA-100827 No.7680-1/6
http://onsemi.com
Semiconductor Components Industries, LLC, 2013
September, 2013
SVC272
Varactor Diode
Monolithic dual Varactor Diode for FM Tunin
14V, 50nA, CR=2.3, Q=150, MCPH3
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Features
• Twin type varactor diode with good large-signal characteristics for FM receiver electronic tuning use
•
Small package permits SVC272-applied sets to be compact and slim
•
Can be also provieded in tape reel package thereby automatic insertion is supported
•
High Quality Factor
Specifi cations
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Reverse Voltage VR16 V
Junction Temperature Tj 125 °C
Storage Temperature Tstg --55 to +125 °C
Package Dimensions
unit : mm (typ)
7019A-002
Ordering number : EN7680A
Product & Package Information
• Package : MCPH3
• JEITA, JEDEC : SC-70, SOT-323
• Minimum Packing Quantity : 3,000 pcs./reel
Packing Type : TL Marking
Electrical Connection
1 : Anode
2 : Anode
3 : Cathode
MCPH3
0.250.25
0.07
2.1
1.6
2.0
0.65 0.3
0.85
0.15
12
3
0 to 0.02
V2
LOT No.
LOT No.
TL
SVC272-TL-E
1
3
2
SVC272
No.7680-2/6
Electrical Characteristics at Ta=25°C
Parameter Symbol Conditions Ratings Unit
min typ max
Breakdown Voltage V(BR)R IR=10μA14V
Reverse Current IRVR=10V 50 nA
Interterminal Capacitance*
C2.0V VR=2.0V, f=1MHz 44.91 49.82 pF
C8.0V VR=8.0V, f=1MHz 14.07 18.55 pF
Quality Factor QV
R=2.0V, f=100MHz 150
Capacitance Ratio CRC2.0V / C8.0V 2.3
Matching Tolerance ΔCm
VR=2.0V, 8.0, f=1MHz (C max-C min) / C min×100 3.0
%
Note)* : Capacitance value per each diode.
Ordering Information
Device Package Shipping memo
SVC272-TL-E MCPH3 3,000pcs./reel Pb Free
SVC272
No.7680-3/6
0123456789 10
2
3
5
7
2
3
5
7
1000
100
10
2
3
5
7
2
3
5
7
1000
100
Rev erse Voltage, VR -- V
Q, C -- VR
Interterminal Capacitance, C -- pF
IT06666
10
Qualit
y
Factor, Q
Q (f=100MHz)
C (f=1MHz)
VRF=20mVrms
--75 --50 --25 0 25 50 75 100 125 150
0.980
1.030
1.025
1.020
1.015
1.010
1.005
1.000
0.995
0.990
0.985
Ambient Temperature, Ta -- °C
C -- Ta
Capacitance Ratio
IT06667
175
4V
6V
VR=2V
8V
4V
6V
VR=8V
2V
f=1MHz
VRF=20mVrms
SVC272
No.7680-4/6
Taping Specifi cation
SVC272-TL-E
SVC272
No.7680-5/6
Outline Drawing Land Pattern Example
SVC272-TL-E
Mass (g) Unit
0.007
* For reference
mm Unit: mm
0.65 0.65
0.4
2.1
0.6
SVC272
PS No.7680-6/6
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf.
SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
