99.80
99.80 coil indication and EMC suppression modules for 95.83.3 and 95.85.3 sockets
Blue*
Diode (+A1, standard polarity) (6...220)V DC 99.80.3.000.00
LED (6...24)V DC/AC 99.80.0.024.59
LED (28...60)V DC/AC 99.80.0.060.59
LED (110...240)V DC/AC 99.80.0.230.59
LED + Diode (+A1, standard polarity) (6...24)V DC 99.80.9.024.99
LED + Diode (+A1, standard polarity) (28...60)V DC 99.80.9.060.99
LED + Diode (+A1, standard polarity) (110...220)V DC 99.80.9.220.99
LED + Varistor (6...24)V DC/AC 99.80.0.024.98
LED + Varistor (28...60)V DC/AC 99.80.0.060.98
LED + Varistor (110...240)V DC/AC 99.80.0.230.98
RC circuit (6...24)V DC/AC 99.80.0.024.09
RC circuit (28...60)V DC/AC 99.80.0.060.09
RC circuit (110...240)V DC/AC 99.80.0.230.09
Residual current by-pass (110...240)V AC 99.80.8.230.07
*Modules in Black
housing are
available on request.
Green LED is standard.
Red LED available
on request.
Approvals
(according to type):
11
Approvals
(according to type):
95 Series - Sockets and accessories for 40 series relays
095.08
0.75 15.8 15.8 15.8 15.8 15.8 15.8 15.8
7 3
10
13.9
113.1
8-way jumper link for 95.83.3 and 95.85.3 sockets 095.08 (blue) 095.08.0 (black)
Rated values 10 A - 250 V
Screw terminal (Box clamp) socket panel or 35 mm rail mount
95.83.3 (blue) 95.83.30 (black) 95.85.3 (blue) 95.85.30 (black)
For relay type 40.31 40.51, 40.52, 40.61
Accessories
Metal retaining clip 095.71
Plastic retaining and release clip 095.91.3 095.91.30 095.91.3 095.91.30
(supplied with socket - packaging code SPA)
8-way jumper link 095.08 095.08.0 095.08 095.08.0
Identification tag 095.80.3
Modules (see table below) 99.80
Sheet of marker tags for retaining and release clip 095.91.3
060.72
plastic, 72 tags, 6x12 mm
Technical data
Rated values
10 A - 250 V *
Insulation 6 kV (1.2/50 µs) between coil and contacts (95.83.3 only)
Protection category IP 20
Ambient temperature °C –40…+70
Screw torque Nm 0.5
Wire strip length mm 7
Max. wire size for 95.83.3 and 95.85.3 sockets solid wire stranded wire
m21x6 / 2x2.5 1x4 / 2x2.5
AWG 1x10 / 2x14 1x12 / 2x14
* For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).
With the relay 40.51 the change-over contact will be 21-12-14.
95.85.3
095.91.3
060.72
78.8
81.9
15.5
41
Ø 3.2
28.8
46.8
33.9
29.9
35.5 21.621.6
75
78.8
81.9
15.5
Ø 3.2
41
NC
12
11
14
COM
NO
A2 A1 COIL
COM
NO
COIL
NC
A2 A1
22 12
21 11
24 14
95.83.3 95.85.3
