SPEC NO: DSAD0949 REV NO: V.9 DATE: NOV/22/2010 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203001892
2.0x1.25mm SMD CHIP LED LAMP
Part Number: APT2012SYCK Super Bright Yellow
Features
z2.0mm x1.25mm SMT LED,0.75mm thickness.
zLow power consumption.
zWide viewing angle.
zIdeal for backlight and indicator.
zVarious colors and lens types available.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Super Bright Yellow device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD0949 REV NO: V.9 DATE: NOV/22/2010 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203001892
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APT2012SYCK Super Bright Yellow (AlGaInP) Water Clear 80 150 120°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Yellow 590 nm IF=20mA
λD [1] Dominant Wavelength Super Bright Yellow 590 nm IF=20mA
Δλ1/2 Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA
C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz
VF [2] Forward Voltage Super Bright Yellow 2 2.5 V IF=20mA
IR Reverse Current Super Bright Yellow 10 uA VR=5V
Parameter Super Bright Yellow Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 175 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAD0949 REV NO: V.9 DATE: NOV/22/2010 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203001892
Super Bright Yellow APT2012SYCK
SPEC NO: DSAD0949 REV NO: V.9 DATE: NOV/22/2010 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203001892
APT2012SYCK
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAD0949 REV NO: V.9 DATE: NOV/22/2010 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203001892
PACKING & LABEL SPECIFICATIONS APT2012SYCK
