TEN 3-4822WIN - TRACOPOWER - Product.Network

http://www.tracopower.com Page 1 of 4

DC/DC Converters

TEN 3WIN Series, 3 Watt

Ordercode Input voltage range Output voltage Output current max. Efﬁciency max.

1500 VDC isolation 3000 VDC isolation

TEN 3-2410WIN - 3.3 VDC 750 mA 77 %

TEN 3-2411WIN TEN 3-2411WIN-HI 5.0 VDC 600 mA 79 %

TEN 3-2412WIN TEN 3-2412WIN-HI 12 VDC 250 mA 82 %

TEN 3-2413WIN TEN 3-2413WIN-HI 15 VDC 200 mA 83 %

TEN 3-2415WIN TEN 3-2415WIN-HI 9.0 – 36 VDC 24 VDC 125 mA 81 %

TEN 3-2421WIN TEN 3-2421WIN-HI (nominal 24 VDC) ±5.0 VDC ±250 mA 80 %

TEN 3-2422WIN TEN 3-2422WIN-HI ±12 VDC ±125 mA 82 %

TEN 3-2423WIN TEN 3-2423WIN-HI ±15 VDC ±100 mA 82 %

TEN 3-4810WIN - 3.3 VDC 750 mA 77 %

TEN 3-4811WIN TEN 3-4811WIN-HI 5 VDC 600 mA 80 %

TEN 3-4812WIN TEN 3-4812WIN-HI 12 VDC 250 mA 83 %

TEN 3-4813WIN TEN 3-4813WIN-HI 15 VDC 200 mA 84 %

TEN 3-4815WIN TEN 3-4815WIN-HI 18 – 75 VDC 24 VDC 125 mA 82 %

TEN 3-4821WIN TEN 3-4821WIN-HI (nominal 48 VDC) ±5.0 VDC ±250 mA 80 %

TEN 3-4822WIN TEN 3-4822WIN-HI ±12 VDC ±125 mA 82 %

TEN 3-4823WIN TEN 3-4823WIN-HI ±15 VDC ±100 mA 82 %

Models

Features

◆ Ultra wide 4 : 1 input range

◆ Input ﬁlter to meet EN 55022, Class A

and FCC, level A without external

components

◆ Extended operating temperature

range –40°C to 85°C

◆ Models with 1’500 VDC and 3’000 VDC

I/O isolation (functional insulation)

◆ DIP-24 package

◆ High reliability, MTBF >1.0 Mio. h

◆ 3-year product warranty

UL 60950 -1

The TEN 3WIN Series is a drop in replacement of the prevalent TEN 3WI Series.

The up-to date design enables a cost reduction without any compromise to reliability

and function. They come with an internal ﬁlter to meet EN55022 class A without ex-

ternal components. Increased EMC immunity and extended operating temperature

range of -40°C to 85°C make these converters an ideal solution for cost critical but

demanding applications. With the standard pinning it is a drop in replacement for

common 3 Watt converters in DIP24 package.

C B

Scheme

IEC 60950-1

http://www.tracopower.com Page 2 of 4

DC/DC Converters

TEN 3WIN Series 3 Watt

Input Specifications

Input current no load 24 Vin models 30 mA typ.

48 Vin models 20 mA typ.

Start-up voltage 24 Vin models: 9.0 VDC (or lower)

48 Vin models: 18 VDC (or lower)

Under voltage shut down (lock-out circuit) 24 Vin models: 8.5 VDC max.

48 Vin models: 17.5 VDC max.

Surge voltage (1 sec. max.) 24 Vin models 50 V max.

48 Vin models 100 V max.

Reflected ripple current 24 Vin models 15 mA typ

48 Vin models 10 mA typ.

Conducted noise EN 55022 class A without external components

ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,

perf. criteria A

Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A

Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A

EN 61000-4-5, ±1 kV perf. criteria A

– external input capacitor

Nippon chemi-con KY 200 µF, 100 V, ESR 48 mOhm

Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A

Short circuit input power 2000 mW max.

Internal power dissipation 1200 mW max.

Output Specifications

Voltage set accuracy ±2 % max.

Regulation – Input variation Vin min. to Vin max. 1.0 % max.

– Load variation 0 – 100 %

single output models 1.0 % max.

dual output models balanced load 2.0 % max.

Minimum load not required

Ripple and noise (20 MHz bandwidth) 70 mVpk-pk max

Transient response time (25% load step change) 500 µs max.

Transient response deviation (25% load step change) ±5 % max.

Temperature coefficient ±0.02 %/K

Current limitation >120 % of Iout max., constant current

Short circuit protection continuous

http://www.tracopower.com Page 3 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

DC/DC Converters

TEN 3WIN Series 3 Watt

Output Specifications (continued)

Capacitive load 3.3 VDC models: 680 µF max.

5.0 VDC models: 470 µF max.

12 VDC models: 330 µF max.

15 VDC models: 220 µF max.

24 VDC models: 100 µF max.

±5.0 VDC models: 220 µF max (each output)

±12 VDC models: 150 µF max. (each output)

±15 VDC models: 100 µF max. (each output)

General Specifications

Temperature ranges – Operating (natural convection cooling 20 LFM) –40°C to +85°C

– Case temperature +100°C max.

– Storage –55°C to +125°C

Derating 3.3 %/K above 70°C

Humidity (non condensing) 95 % rel H max.

Reliability, calculated MTBF (MIL-HDBK-217 F, at +25°C, ground benign) >1 Mio. h

Isolation voltage (60 sec.) – Input/Output 1’500 VDC or 3‘000 VDC

Isolation capacitance – Input/Output 300 pF max.

Isolation resistance – Input/Output (500 VDC) >1‘000 M Ohm

Switching frequency 90 kHz min. (pulse frequency modulation PFM)

Safety standards cUL/UL 60950-1, IEC/EN 60950-1

Safety approvals – CSA certificate of compliance CAN/CSA-C22.2 No 60950-1-07, Am 1:2011

ANSI/UL Std No 60950-1, 2nd Ed, AM 1:2011

– CB test certificate IEC 60950-1:2005 2nd Ed, Am 1:2009

– Certification documents www.tracopower.com/overview/ten3win

Environmental compliance – Reach www.tracopower.com/overview/ten3win

– RoHS RoHS directive 2011/65/EU

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

www.tracopower.com

Page 4 of 4

Rev. March 23. 2015

Outline Dimensions

(0.18)

4.5 22.86

(0.9)

20.3

2.54

31.8

(1.25)

10.2

(0.4 )

15.24

(0.6)

911

2223

16 14

Bottom view

15.24

(0.6)

5.08

2.54

(0.8 )

(0.1)

(0.18 )

(0.1) (0.2)

4.5

Pin Single Dual

2–Vin (GND) –Vin (GND)

3–Vin (GND) –Vin (GND)

9No pin Common

11 ntc –Vout

14 +Vout +Vout

16 –Vout Common

22 +Vin (Vcc) +Vin (Vcc)

23 +Vin (Vcc) +Vin (Vcc)

Pin-Out

DC/DC Converters

TEN 3WIN Series 3 Watt

Physical Specifications

Casing material non conductive FR4

Potting material epoxy (UL 94V-0 rated)

Pin material copper alloy with gold plated subplate

Weight 12.8 g (0.45 oz)

Soldering temperature max. 260°C / 10 sec.

Dimensions in [mm], () = Inch

Pin diameter ø 0.5 ±0.05 (0.02 ±0.002)

Tolerances ±0.5 (±0.02)

Pin pich tolerances ±0.25 (± 0.01)

ntc = not to connect