Precision Flat Chip Resistors
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 28700
208 Revision: 16-Jul-08
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Precision
Vishay Beyschlag
Thin Film Flat Chip Resistors combine the proven reliability
of the professional products with an advanced level of
precision and stability. Therefore they are perfectly suited for
applications in the fields of test and measuring equipment
together with industrial and medical electronics. The latest
member of this product family size 0402 follows the ongoing
trend of miniaturisation and enables precision applications in
micro circuit designs.
FEATURES
•Approved according to EN 140401-801
•Thin-film technology
•Low TCR: ± 10 to ± 25 ppm/K
•Precision tolerance of value: ± 0.1 and ± 0.25 %
•Superior overall stability: class 0.1 and 0.25
•Pure Sn termination on Ni barrier layer
•Compatible with lead (Pb)-free and lead containing
soldering processes
•Lead (Pb)-free and RoHS compliant
APPLICATIONS
•Automotive
•Test and measuring equipment
•Medical equipment
•Industrial equipment
Note
(1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded.
METRIC SIZE
INCH: 0402 0603 0805 1206
METRIC: RR 1005M RR 1608M RR 2012M RR 3216M
RoHS
COMPLIANT
TECHNICAL SPECIFICATIONS
DESCRIPTION MCS 0402 MCT 0603 MCU 0805 MCA 1206
Metric size RR 1005M RR 1608M RR 2012M RR 3216M
Resistance range 100 Ωto 221 kΩ39 Ωto 511 kΩ39 Ω to 1.5 MΩ39 Ωto 2 MΩ
Resistance tolerance ± 0.25 %; ± 0.1 %
Temperature coefficient ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K
Operation mode precision standard precision standard precision standard precision standard
Climatic category (LCT/UCT/days) 10/85/56 55/125/56 10/85/56 55/125/56 10/85/56 55/125/56 10/85/56 55/125/56
Rated dissipation, P70 (1) 0.016 W 0.063 W 0.032 W 0.1 W 0.050 W 0.125 W 0.1 W 0.25 W
Operating voltage, Umax. AC/DC 12.5 V 50 V 25 V 75 V 35 V 150 V 50 V 200 V
Film temperature 85 °C 125 °C 85 °C 125 °C 85 °C 125 °C 85 °C 125 °C
Max. resistance change at P70
for resistance range,
ΔR/R max., after:
100 Ωto 221 kΩ39 Ωto 511 kΩ39 Ωto 1.5 MΩ39 Ωto 2 MΩ
1000 h ≤ 0.1 % ≤ 0.2 % ≤ 0.1 % ≤ 0.2 % ≤ 0.1 % ≤ 0.2 % ≤ 0.05 % ≤ 0.1 %
8000 h ≤ 0.2 % ≤ 0.4 % ≤ 0.2 % ≤ 0.4 % ≤ 0.2 % ≤ 0.4 % ≤ 0.1 % ≤ 0.25 %
225 000 h ≤ 0.5 % ≤ 1.0 % ≤ 0.5 % ≤ 1.0 % ≤ 0.5 % ≤ 1.0 % ≤ 0.25 % ≤ 0.5 %
Specified lifetime 225 000 h 225 000 h 225 000 h 225 000 h
Insulation voltage:
1 min; Uins 75 V 100 V 200 V 300 V
continuous 75 V 75 V 75 V 75 V
FITobserved ≤ 0.1 x 10-9/h ≤ 0.1 x 10-9/h ≤ 0.1 x 10-9/h ≤ 0.1 x 10-9/h
Document Number: 28700 for technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com
Revision: 16-Jul-08 209
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Precision
Precision Flat Chip Resistors Vishay Beyschlag
12NC INFORMATION FOR HISTORICAL
CODING REFERENCE ONLY
• The resistors have a 12-digit numeric code starting with
2312.
• The subsequent 4 digits indicate the resistor type,
specification and packaging; see the 12NC table.
• The remaining 4 digits indicate the resistance value:
- The first 3 digits indicate the resistance value.
- The last digit indicates the resistance decade in
accordance with the 12NC Indicating Resistance
Decade table.
Last Digit of 12NC Indicating Resistance Decade
12NC Example
The 12 NC of a MCT 0603 resistor, value 47 kΩ and
TCR 25 with ± 0.1 % tolerance, supplied in cardboard tape
of 5000 units per reel is: 2312 216 74703.
RESISTANCE DECADE LAST DIGIT
10 Ω to 99.9 Ω9
100 Ω to 999 Ω1
1kΩ to 9.99 kΩ2
10 kΩ to 99.9 kΩ3
100 kΩ to 999 kΩ4
1MΩ to 9.99 MΩ5
12NC - resistors type and packaging
DESCRIPTION ORDERING CODE 2312... .....
CARDBOARD TAPE ON REEL
TYPE TCR TOL. P1
1000 UNITS
P5
5000 UNITS
PW
20 000 UNITS
E1
1000 UNITS
E0
10 000 UNITS
MCS 0402
± 25 ppm/K ± 0.25 % - - - 261 6.... 276 6....
± 0.1 % - - - 261 7.... 276 7....
± 15 ppm/K ± 0.25 % - - - 262 6.... 277 6....
± 0.1 % - - - 262 7.... 277 7....
± 10 ppm/K ± 0.25 % - - - 263 6.... 278 6....
± 0.1 % - - - 263 7.... 278 7....
MCT 0603
± 25 ppm/K ± 0.25 % 201 6.... 216 6.... 206 6.... - -
± 0.1 % 201 7.... 216 7.... 206 7.... - -
± 15 ppm/K ± 0.25 % 202 6.... 217 6.... 207 6.... - -
± 0.1 % 202 7.... 217 7.... 207 7.... - -
± 10 ppm/K ± 0.25 % 203 6.... 218 6.... 208 6.... - -
± 0.1 % 203 7.... 218 7.... 208 7.... - -
MCU 0805
± 25 ppm/K ± 0.25 % 241 6.... 256 6.... 246 6.... - -
± 0.1 % 241 7.... 256 7.... 246 7.... - -
± 15 ppm/K ± 0.25 % 242 6.... 257 6.... 247 6.... - -
± 0.1 % 242 7.... 257 7.... 247 7.... - -
± 10 ppm/K ± 0.25 % 243 6.... 258 6.... 248 6.... - -
± 0.1 % 243 7.... 258 7.... 248 7.... - -
MCA 1206
± 25 ppm/K ± 0.25 % 381 6.... 396 6.... 386 6.... - -
± 0.1 % 381 7.... 396 7.... 386 7.... - -
± 15 ppm/K ± 0.25 % 382 6.... 397 6.... 387 6.... - -
± 0.1 % 382 7.... 397 7.... 387 7.... - -
± 10 ppm/K ± 0.25 % 383 6.... 398 6.... 388 6.... - -
± 0.1 % 383 7.... 398 7.... 388 7.... - -
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 28700
210 Revision: 16-Jul-08
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Precision
Vishay Beyschlag Precision Flat Chip Resistors
Notes
(1) Products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER
(2) Please refer to table PACKAGING, next page
DIMENSIONS
PART NUMBER AND PRODUCT DESCRIPTION (1)
PART NUMBER: MCT06030D4641BPW00
MCT06030D4641BPW00
MODEL/SIZE SPECIAL CHARACTER TCR VALUE TOLERANCE PAC KAG IN G (2) SPECIAL
MCS0402
MCT0603
MCU0805
MCA1206
0 = neutral F = ± 10 ppm/K
E = ± 15 ppm/K
D = ± 25 ppm/K
3 digit value
1 digit
multiplier
MULTIPLIER
7 = *10-3 2 = *102
8 = *10-2 3 = *103
9 = *10-1 4 = *104
0 = *100 5 = *105
1 = *101 6 = *106
B = ± 0.1 %
C = ± 0.25 %
P1
P5
PW
E1
E0
up to 2 digits
00 = standard
PRODUCT DESCRIPTION: MCT 0603 - 25 0.1 % PW 4K64
MCT 0603 - 25 0.1 % PW 4K64
MODEL SIZE TCR TOLERANCE PAC KAG IN G (2) RESISTANCE VALUE
MCS
MCT
MCU
MCA
0402
0603
0805
1206
± 10 ppm/K
± 15 ppm/K
± 25 ppm/K
± 0.1 %
± 0.25 %
P1
P5
PW
E1
E0
47K = 47 kΩ
50R1 = 50.1 Ω
T2
T1
L
H
WWT
DIMENSIONS - CHIP resistor types, mass and relevant physical dimensions
TYPE H
(mm)
L
(mm)
W
(mm)
WT
(mm)
T1
(mm)
T2
(mm)
MASS
(mg)
MCS 0402 0.32 ± 0.05 1.0 ± 0.05 0.5 ± 0.05 > 75 % of W 0.2 + 0.1/- 0.15 0.2 ± 0.1 0.6
MCT 0603 0.45 + 0.1/- 0.05 1.55 ± 0.05 0.85 ± 0.1 > 75 % of W 0.3 + 0.15/- 0.2 0.3 + 0.15/- 0.2 1.9
MCU 0805 0.45 + 0.1/- 0.05 2.0 ± 0.1 1.25 ± 0.15 > 75 % of W 0.4 + 0.1/- 0.2 0.4 + 0.1/- 0.2 4.6
MCA 1206 0.55 ± 0.1 3.2 + 0.1/- 0.2 1.6 ± 0.15 > 75 % of W 0.5 ± 0.25 0.5 ± 0.25 9.2
Document Number: 28700 for technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com
Revision: 16-Jul-08 211
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Precision
Precision Flat Chip Resistors Vishay Beyschlag
Notes
(1) Resistance values to be selected from E96 and E192 series, other values are available on request
(2) TCR 10 is specified over the temperature range from - 10 °C to 85 °C
Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability.
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
DESCRIPTION RESISTANCE VALUE (1)
TCR TOLERANCE MCS 0402 MCT 0603 MCU 0805 MCA 1206
± 25 ppm/K
± 0.25 % 100 Ω to 221 kΩ39 Ωto 511 kΩ39 Ωto 1.5 MΩ39 Ωto 2 MΩ
± 0.1 % 150 Ω to 221 kΩ47 Ω to 511 kΩ47 Ω to 1.5 MΩ47 Ω to 2 MΩ
± 15 ppm/K
± 0.25 % 100 Ω to 150 kΩ39 Ωto 332 kΩ39 Ωto 1 MΩ39 Ωto 1.5 MΩ
± 0.1 % 150 Ω to 150 kΩ47 Ωto 332 kΩ47 Ωto 1 MΩ47 Ωto 1.5 MΩ
± 10 ppm/K (2)
± 0.25 % 100 Ω to 130 kΩ39 Ωto 221 kΩ39 Ωto 511 kΩ39 Ωto 1 MΩ
± 0.1 % 150 Ω to 130 kΩ47 Ωto 221 kΩ47 Ωto 511 kΩ47 Ωto 1 MΩ
PACKAGING
MODEL
REEL
PIECES/
PAPER TAPE ON REEL CODE
MCS0402
1000 E1
10 000 E0
MCT0603
1000 P1
5000 P5
20 000 PW
MCU0805
1000 P1
5000 P5
20 000 PW
MCA1206
1000 P1
5000 P5
20 000 PW
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 28700
212 Revision: 16-Jul-08
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Precision
Vishay Beyschlag Precision Flat Chip Resistors
DESCRIPTION
Production is strictly controlled and follows an extensive
set of instructions established for reproducibility. A homo-
geneous film of metal alloy is deposited on a high grade Al203
ceramic substrate and conditioned to achieve the desired
temperature coefficient. Specially designed inner contacts
are deposited on both sides. A special laser is used to
achieve the target value by smoothly fine trimming the
resistive layer without damaging the ceramics. A further
conditioning is applied in order to stabilize the trimming
result. The resistor elements are covered by a blue
protective coating designed for electrical, mechanical and
climatic protection. The terminations receive a final pure tin
on nickel plating.
The result of the determined production is verified by an
extensive testing procedure and optical inspection
performed on 100 % of the individual chip resistors. Only
accepted products are laid directly into the paper tape in
accordance with EN 60286-3.
ASSEMBLY
The resistors are suitable for processing on automatic SMD
assembly systems and for automatic soldering using wave,
reflow or vapour phase. The encapsulation is resistant to all
cleaning solvents commonly used in the electronics industry,
including alcohols, esters and aqueous solutions. The
suitability of conformal coatings, if applied, shall be qualified
by appropriate means to ensure the long-term stability of the
whole system. The resistors are RoHS compliant, the pure
tin plating provides compatibility with lead (Pb)-free and
lead-containing soldering processes. The immunity of the
plating against tin whisker growth has been proven under
extensive testing. All products comply with the
CEFIC-EECA-EICTA list of legal restrictions on hazardous
substances.
This includes full compatibility with the following directives:
•2000/53/EC End of Vehicle life Directive (ELV)
•
2000/53/EC Annex II to End of Vehicle Life Directive (ELV II)
•2002/95/EC Restriction of the use of Hazardous
Substances Directive (RoHS)
•2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
Solderability is specified for 2 years after production or
re-qualification. The permitted storage time is 20 years.
APPROVALS
The resistors are tested in accordance with EN 140401-801
(superseding CECC 40401-801) which refers to EN 60115-1
and EN 140400. Approval of conformity is indicated by the
CECC logo on the package label.
Vishay BEYSCHLAG has achieved "Approval of
Manufacturer" in accordance with EN 100114-1. The
release certificate for "Technology Approval Schedule" in
accordance with CECC 240001 based on EN 100114-6 is
granted for the Vishay BEYSCHLAG manufacturing process.
SPECIALS
On request, resistors are available with established reliability
in accordance with EN 140 401-801 Version E. Please refer
to the special data sheet for information on failure rate level,
available resistance ranges and order codes.
Document Number: 28700 for technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com
Revision: 16-Jul-08 213
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Precision
Precision Flat Chip Resistors Vishay Beyschlag
FUNCTIONAL PERFORMANCE
MC T 0 603
MCU 0 805
MC A 12 06
Ambient Te mperature
C
100 150
- 50
50
0
70
0
0.1
0.2
W
Power Dissipation P
amb
MC S 0 402
ϑ
Derating - Standard Operation
Ambient Te mperature
100 150
- 50
50
0
70
0
0.1
0.2
W
Power Dissipation P
C
MC T 0 603
MCU 0 805
MC A 12 06
MC S 0 402
amb
ϑ
Derating - Precision Operation
MC T 0 603
MCU 0 805
MC A 1 206
0.01
1
µV/V
Current Noise A1
1 MΩ 10 MΩ
1 kΩ100 kΩ
10 kΩ
Resistance Va lu e R
0.1
Current Noise A1 In accordance with IEC 60195
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 28700
214 Revision: 16-Jul-08
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Precision
Vishay Beyschlag Precision Flat Chip Resistors
TEST AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
EN 60115-1, Generic specification (includes tests)
EN 140 400, Sectional specification (includes schedule for
qualification approval)
EN 140 401-801, Detail specification (includes schedule for
conformance inspection)
The components are approved in accordance with the
European CECC-system, where applicable. The following
table contains only the most important tests. For the full test
schedule refer to the documents listed above. The testing
also covers most of the requirements specified by
EIA/IS-703 and JIS-C-5202.
The tests are carried out in accordance with IEC 60068 and
under standard atmospheric conditions in accordance with
IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated
temperature range: Lower Category Temperature, Upper
Category Temperature; damp heat, long term, 56 days) is
valid. Unless otherwise specified the following values apply:
Temperature: 15 °C to 35 °C
Relative humidity: 45 % to 75 %
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
The components are mounted for testing on boards in
accordance with EN 60115-1, 4.31 unless otherwise
specified.
The parameters stated in the Test Procedures and
Requirements table are based on the required tests and
permitted limits of EN 140 401-801. However, some
additional tests and a number of improvements against those
minimum requirements have been included.
TEST PROCEDURES AND REQUIREMENTS
EN
60115-1
CLAUSE
IEC
60068-2
TEST
METHOD
TEST PROCEDURE
REQUIREMENTS
PERMISSIBLE CHANGE ΔR
STABILITY CLASS 0.1 STABILITY CLASS 0.25
Stability for product types:
MCS 0402 470 Ωto 10 kΩ> 10 kΩ to 52.3 kΩ
MCT 0603 100 Ωto 10 kΩ39 Ωto < 100 Ω;
>10 kΩ to 511 kΩ
MCU 0805 100 Ωto 47.5 kΩ39 Ωto < 100 Ω;
> 47.5 kΩ to 1.5 MΩ
MCA 1206 47 Ωto 332 kΩ39 Ωto < 47 Ω;
> 332 kΩ to 2 MΩ
4.5 - Resistance ± 0.1 % R; ± 0.25 % R
4.8.4.2 - Temperature
coefficient
At 20/- 10/20 °C and
20/85/20 °C ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K
4.25.1
−
Endurance at
70 °C: precision
operation mode
U= or
U = Umax.;
whichever is the less severe;
1,5 h on; 0,5 h off ± (0.1 % R+0.02Ω) (1)
± (0.2 % R+0.02Ω) (1)
1.5 h on; 0.5 h off
70 °C; 1000 h
70 °C; 8000 h
−
Endurance at
70 °C:
standard
operation mode
U= or
U = Umax.;
whichever is the less severe;
1.5 h on; 0.5 h off
1.5 h on; 0.5 h off
70 °C; 1000 h ± (0.2 % R+0.02Ω) (1)
70 °C; 8000 h ± (0.4 % R+0.05Ω) (1)
4.25.3 -
Endurance at
upper category
temperature
85 °C; 1000 h
125 °C; 1000 h
± (0.1 % R+ 0.02 Ω)
± (0.2 % R+ 0.02 Ω)
± (0.2 % R+ 0.02 Ω)
± (0.25 % R+ 0.05 Ω)
P70 x R
P70 x R
Document Number: 28700 for technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com
Revision: 16-Jul-08 215
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Precision
Precision Flat Chip Resistors Vishay Beyschlag
4.24 78 (Cab) Damp heat,
steady state
(40 ± 2) °C; 56 days;
(93 ± 3) % RH ± (0.1 % R+0.02 Ω) ± (0.25 % R+ 0.05 Ω)
4.23 Climatic
sequence:
± (0.1 % R+ 0.02 Ω)± (0.25 % R+ 0.05 Ω)
4.23.2 2 (Ba) Dry heat UCT; 16 h
4.23.3 30 (Db) Damp heat,
cyclic
55 °C; 24 h; > 90 % RH; 1
cycle
4.23.4 1 (Aa) Cold LCT; 2 h
4.23.5 13 (M) Low air
pressure 8.5 kPa; 2 h; 25 ± 10 °C
4.23.6 30 (Db) Damp heat,
cyclic
55 °C; 5 days;
> 95 to 100 % RH; 5 cycles
LCT = - 55 °C; UCT = 125 °C
- 1 (Aa) Cold - 55 °C; 2h ± (0.05 % R+ 0.01 Ω)
4.19 14 (Na) Rapid change
of temperature
30 min at LCT and
30 min at UCT;
LCT = - 10 °C
UCT = 85 °C; 5 cycles
± (0.05 % R+ 0.01 Ω)
no visible damage
LCT = - 55 °C; UCT = 125 °C;
1000 cycles
± (0.25 % R+ 0.05 Ω)
no visible damage
4.13 -
Short time
overload;
precision
operation mode
U= 2.5 x or
U=2 x Umax.;
whichever is the less severe;
5 s
± (0.05 % R+ 0.01 Ω)
Short time
overload;
standard
operation mode
± (0.05 % R+ 0.01 Ω)
4.27 -
Single pulse
high voltage
overload;
standard
operation mode
Severity no. 4:
U= 10 x or
U=2 x Umax.;
whichever is the less severe;
10 pulses 10 µs/700 µs
± (0.5 % R+ 0.05 Ω) 2)
no visible damage
4.37 -
Periodic electric
overload;
standard
operation mode
U= or
U=2 x Umax.;
whichever is the less severe;
0.1 s on; 2.5 s off;
1000 cycles
± (0.5 % R+0.05Ω) 2)
no visible damage
4.22 6 (Fc) Vibration
eEndurance by sweeping;
10 to 2000 Hz;
no resonance;
amplitude ≤ 1.5 mm or
≤ 200 m/s2; 6 h
± (0.05 % R+ 0.01 Ω)
no visible damage
TEST PROCEDURES AND REQUIREMENTS
EN
60115-1
CLAUSE
IEC
60068-2
TEST
METHOD
TEST PROCEDURE
REQUIREMENTS
PERMISSIBLE CHANGE ΔR
STABILITY CLASS 0.1 STABILITY CLASS 0.25
Stability for product types:
MCS 0402 470 Ωto 10 kΩ>10 kΩ to 52.3 kΩ
MCT 0603 100 Ωto 10 kΩ39 Ωto < 100 Ω;
> 10 kΩ to 511 kΩ
MCU 0805 100 Ωto 47.5 kΩ39 Ωto < 100 Ω;
> 47.5 kΩ to 1.5 MΩ
MCA 1206 47 Ωto 332 kΩ39 Ωto < 47 Ω;
> 332 kΩ to 2 MΩ
P70 x R
P70 x R
15 x P70 x R
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 28700
216 Revision: 16-Jul-08
MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Precision
Vishay Beyschlag Precision Flat Chip Resistors
Notes
(1) See 4.25.1 (above): special requirements for type MCA 1206
(2) The pulse load stability of professional MFC resistors applies for precision resistors also. However, severe pulse loads are likely to jeopardise
precision stability requirements.
4.17.2 58 (Td) Solderability
Solder bath method;
SnPb40; non-activated flux
(215 ± 3) °C; (3 ± 0.3) s Good tinning (≥ 95 % covered);
no visible damage
Solder bath method;
SnAg3Cu0.5 or SnAg3.5;
non-activated flux
(235 ± 3) °C; (2 ± 0.2) s
4.18.2 58 (Td) Resistance to
soldering heat
Solder bath method;
(260 ± 5) °C; (10 ± 1) s ± (0.05 % R+ 0.01 Ω)
4.29 45 (XA)
Component
solvent
resistance
Isopropyl alcohol + 50 °C;
method 2 No visible damage
4.32 21 (Ue3)Shear
(adhesion)
RR 1005M and RR 1608M;
9N No visible damage
RR 2012M and RR 3216M;
45 N
4.33 21 (Ue1)Substrate
bending Depth 2 mm, 3 times ± (0.05 % R+ 0.01 Ω)
no visible damage, no open circuit in bent position
4.7 - Voltage proof URMS =Uins; 60 ± 5 s No flashover or breakdown
4.35 - Flammability IEC 60695-2-2,
needle flame test; 10 s No burning after 30 s
Special requirements for type MCA 1206
4.25.1
-
Endurance at
70 °C: precision
operation mode
U= or
U = Umax.;
whichever is the less severe
70 °C; 1000 h ± (0.05 % R+ 0.02 Ω)
70 °C; 8000 h ± (0.1 % R+ 0.02 Ω)
-
Endurance at
70 °C:
standard
operation mode
U= or
U = Umax.;
whichever is the less severe
70 °C; 1000 h ± (0.1 % R+ 0.02 Ω)
70 °C; 8000 h ± (0.25 % R+ 0.05 Ω)
TEST PROCEDURES AND REQUIREMENTS
EN
60115-1
CLAUSE
IEC
60068-2
TEST
METHOD
TEST PROCEDURE
REQUIREMENTS
PERMISSIBLE CHANGE ΔR
STABILITY CLASS 0.1 STABILITY CLASS 0.25
Stability for product types:
MCS 0402 470 Ωto 10 kΩ> 10 kΩ to 52.3 kΩ
MCT 0603 100 Ωto 10 kΩ39 Ωto < 100 Ω;
>10 kΩ to 511 kΩ
MCU 0805 100 Ωto 47.5 kΩ39 Ωto < 100 Ω;
> 47.5 kΩ to 1.5 MΩ
MCA 1206 47 Ωto 332 kΩ39 Ωto < 47 Ω;
> 332 kΩ to 2 MΩ
P70 x R
P70 x R
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
