Switching Power Supply Type SPD 120W New DIN rail mounting * * * * * * * * * * Product Description The Switching power supplies SPD series are specially designed to be used in all automation application where the installation is on a DIN rail Ordering Key and compact dimensions and performance are a must. Then version features PFC and parallel function as standard. au SP D 24 120 1 B N Model Mounting ( D = Din rail ) Output voltage Output power Input type Optional features New Type Input type: 1= single phase Approvals art gepru f t B Installation on DIN Rail 7.5 or 15mm Short circuit protection PFC standard High efficiency Power ready output LED indicator for DC power ON LED indicator for DC low Parallel versions standard Compact dimensions UL, cUL listed and TUV/CE approved p e T d Rheinland Product Safety y e appro v Optional Features Description Code Standard screw terminal Nil Plug-in connectors B Output Performances DC ON LED Rated Output Output Voltage Trim Range (VDC)Thereshold at output Model startup Voltage Power (W) Current (A) (VDC) Min. VDC Max. VDC Min. Max. 12 120 10 11.4 14.5 10 11.2 SPD12120 24 120 5 22.5 28.5 17.6 19.4 SPD24120 48 120 2.5 45.0 55.0 37.0 43.0 SPD48120 DC LO LED (VDC) Thereshold after Typical startup Efficiency Min. 10 17.6 37.0 Max. 11.2 19.4 43.0 84% 86% 87% Output Data Output voltage accuracy Line regulation Load regulation Non parallel mode Parallel mode Temp. coefficient Transient recovery time 1 - 0 +1% max (factory adjusted) 0.5% 1% 5% 0.03% / C 2ms Ripple and noise Vi nom, Io nom BW = 20Mhz Hold up Time Vi = 115VAC Hold up time Vi = 230VAC Minimum load Parallel Operation 50mVpp 25ms 30ms 0% 3 units max. Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 31/10/13 Switching Power Supply Type SPD 120W N DIN rail mounting Input Data Rated input voltage Voltage range AC in, 115 AC in, 230 DC in Rated input current Input current Vi 90 / 180 VAC 115/230VAC autoselect 90 - 132VAC 180 - 264VAC 210 - 370VDC 2.2 / 0.83A 2.8 / 1.4A max Frequency range Inrush current Vi= 115VAC Vi= 230VAC P.F.C. Passive 230VAC Io nom Leakage current Input-Output Input-Fg 47- 63 Hz 24A 48A 0.7 0.25mA Max. 3.5mA Max. Controls and Protections Input Fuse Overvoltage Protection Vi nom 0.8 Ionom Output Short Circuit Rated Overload Protection 1) T3.15/250VAC internal1) 30 - 33VDC Current limited 110 - 145% Power ready (only SPD 24) Threshold at start up (contact closed) Contact rating at 60VDC Insulation 17.6 - 19.4VDC 0.3A 500VDC Fuse not replaceable by user General Data (@ nominal line, full load, 25C ) Ambient temperature Derating (>60C to +71C) Ambient humidity Storage temperature Protection degree Cooling -35C to 71C 2.5% / C 20 to 95%RH -40C to +85C IP20 Free air convection Switching frequency MTBF (MIL-HDBK-217F) Case material Dimensions L x W x D Weight 55kHz 450.000h Metal (powder painted aluminium) 125 x 63.5 x 126 920g Approvals and EMC Insulation voltage I / O Insulation resistance UL / cUL TUV 3.000VAC min 100M min UL508 listed, UL60950-1 Recognized EN60950-1 CE EN50081-1 EN55022 class B EN61000-3-2 EN61000-3-3 EN61000-6-2 EN61000-6-3 EN55024 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 31/10/13 2 Switching Power Supply Type SPD 120W N DIN rail mounting Block Diagrams Pin Assignement and Front Controls Pin No. Designation Description 1 RDY DC OK, relay normally open contact 2 RDY DC OK, relay normally open contact 3 + Positive output terminal 4 + Positive output terminal 5 - Negative output terminal 6 - Ground terminal to minimise High frequency emissions 7 GND Negative output terminal 8 L Phase input ( no polarity with DC input ) 9 N Neutral input ( no polarity with DC input ) DC ON DC output ready LED DC LO DC low indicator LED Vout ADJ. Trimmer for fine output voltage adjustment S/P Single/parallel selection switch Installation Ventilation and cooling Screw terminals Normal convection All sides 25mm free space for cooling is recommended 10-24AWG flexible or solid cable 8mm stripping recommend Plug-in connectors 10-24AWG flexible or solid cable 7mm stripping recommend Max. torque for plug-in terminals Input terminals 0.784Nm (7.0lb-in) Output terminals 0.784Nm (7.0lb-in) Max. torque for screws terminals Input terminals 1.008Nm (9.0lb-in) Output terminals 0.616Nm (5.5lb-in) 3 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 31/10/13 Typ. Current Limited Curve 100 230VAC 75 115VAC 50 25 100 110 120 130 140 150 160 Output Current [%] Derating Diagram Typ. Efficiency Curve 85 Efficiency [%] Power out [%] 100 75 0 -35 80 75 70 230VAC 65 115VAC 60 61 Temperature [%] Mechanical Drawings 71 10 25 50 70 Power out [%] 100 mm (inches) Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 31/10/13 4