T13-211 Thermal (T- and TA-Line) https://www.schurter.com /PG17_20 Circuit Breaker for Equipment thermal, Threaded neck type, Reset type, Quick connect terminals See below: Approvals and Compliances Description - Threaded neck type Thermal circuit breaker 1pole Reset type Wide current range High breaking capacity Quick connect terminals 6.3 x 0.8 mm Unique Selling Proposition - Applications - Power supplies Uninterruptible power supply Power tools Household appliances Weblinks pdf data sheet, html datasheet, General Product Information, DistributorStock-Check, Detailed request for product, Product News Compact design Positively trip-free release Available with cover Different mounting possibilities Technical Data Rated Voltage AC Rated Voltage DC Rated current range AC Conditional short circuit capacity Short circuit capacity Icn Degree of Protection Dielectric Strength Insulation Resistance Endurance typical Endurance minimum AC 240/277 VAC, see approbations 28 VDC 0.05 - 30 A IEC: Inc, PC1, AC 240 V: 1 kA at In < 7 A/240 VAC : 8 x In at In 7 A/240 VAC : 400 A AC/DC 28 V : 400 A from front side IP40 acc. to IEC 60529 50 Hz: 1.5 kV Impulse 1.2/50 s: > 2.5 kV 500 VDC > 100 M 2 x Ir: 3000 switching cycles Reset type AC : 2 x Ir , cos 0.6 : DC : 2 x Ir , L/R = 2 - 3 ms : 50 switching cycles Overload Allowable Operation Temp. Vibration Resistance Shock Resistance Tripping Type Actuation Type Weight IEC: min. 40 trips @ 6 x Ir, cos 0.6 UL / CSA: min. 50 trips @ 1.5 x Ir, cos 0.75 -5 C to 60 C 1.5 mm @ 10 - 60 Hz acc. to IEC 60068-2-6, test Fc 10 G @ 60 - 500 Hz acc. to IEC 60068-2-6, test Fc 100 G / 6 ms acc. to IEC 60068-2-27, test Ea Thermal Reset type ca. 10 g Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Circuit Breakers 1 T13-211 Thermal (T- and TA-Line) https://www.schurter.com /PG17_20 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: T13 Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 123283 UL Approvals UL UL File Number: E71572 CSA Approvals CSA CSA Certification Record: LR 37712 CCC Approvals CCC CCC Certificate Number: 2012010307571195 Design Standard Description Designed according to IEC 60934 Circuit-breakers for equipment (CBE) Designed according to UL 1077 Standard for Supplementary Protectors for Use in Electrical Equipment Designed according to CSA C22.2 No. 235 Supplementary Protectors Designed according to GB 17701 Circuit-breaker for equipment Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/836 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification 2 Circuit Breakers T13-211 Thermal (T- and TA-Line) https://www.schurter.com /PG17_20 Dimension [mm] T13-211 2 1 3/8-27UNS-2A O 13 8.8 9 45 - 0.3 8 20 16 O5 18.7 +0.4 -0.0 6.3 11.5 11.5 - 0.3 31 O 9. 6 14 Diagrams T13-... 1 2 Circuit Breakers 3 T13-211 Thermal (T- and TA-Line) https://www.schurter.com /PG17_20 Approval Rated current Rated Voltage AC Rated Voltage DC UL 1077 0.05...30 A 277 V 28 V CSA C22.2 No. 235 0.05...30 A 277 V 28 V EN 60934 0.05...30 A 240 V - GB 17701 0.05...30 A 240 V - Typical internal resistance Rated Current [A] Internal Resistance [] 0.05 376.500 0.50 4.40 1.00 1.10 2.00 0.31 4 3.00 0.14 4.00 0.068 5.00 0.048 6.00 0.033 8.00 0.026 9.00 0.0125 10.00 0.0125 11.00 0.0085 12.00 0.0085 13.00 0.0085 14.00 0.007 15.00 0.007 16.00 0.007 17.00 0.0047 18.00 0.0047 19.00 0.0047 20.00 0.004 21.00 0.0035 22.00 0.003 23.00 0.003 24.00 0.003 25.00 0.003 26.00 0.0022 27.00 0.002 28.00 0.002 29.00 0.002 30.00 0.002 Circuit Breakers T13-211 Thermal (T- and TA-Line) https://www.schurter.com /PG17_20 Effect of ambient temperature The units are calibrated for an ambient temperature of +23C. To determine the rated current for a lower or higher ambient temperature, use a correction factor (typical value) from the table below: Ambient Temperature [C] Correction factor -5 0.88 0 0.90 10 0.95 23 1.00 30 1.05 40 1.10 50 1.18 60 1.26 Example: Rated current = 5 A, Environmental temperature = 40 C, --> Correction factor = 1.1, Resulting current = 5.5 A --> Fount to next higher rated current: 6 A Time-Current-Curves [ min ] [ sec] 10'000 < 7,0 A > 7,0A 60 30 20 2000 1000 10 500 5 200 Time in Seconds 100 1 50 20 10 5 2 1 0,5 0, 3 0, 2 0,1 1,05 1,32 2 3 4 5 8 10 Multiple of Rated Current In Reference Temperature +23 Config. Code T13|-|1|2|3|B|-|1.23| The characters are placeholders for the correspondingly keys of selections from the key tables. T13|-| 1 |2|3|B|-|1.23| = Mounting Mounting Threaded neck type with knurled nut T13|-|1|2| 3 |B|-|1.23| = Terminal Configuration key 2 T13|-|1| 2 |3|B|-|1.23| = Actuation Type Actuation Type Reset type Terminal Configuration key Quick connect terminal 6.3x0.8mm 1 T13|-|1|2|3| B |-|1.23| = Setting indication Configuration key 1 Setting indication Configuration key Setting indication Circuit Breakers R 5 T13-211 Thermal (T- and TA-Line) https://www.schurter.com /PG17_20 T13|-|1|2|3|B|-| 1.23 | = Rated current Rated current Rated current Configuration key 0.05 A 0.05 0.1 A 0.1 0.15 A 0.15 0.2 A 0.2 0.3 A 0.3 0.4 A 0.4 0.5 A 0.5 0.6 A 0.6 0.7 A 0.7 0.8 A 0.8 0.9 A 0.9 1.0 1 1.1 A 1.1 1.2 A 1.2 1.3 A 1.3 1.4 A 1.4 1.5 A 1.5 1.6 A 1.6 1.7 A 1.7 1.8 A 1.8 1.9 A 1.9 2.0 A 2 2.1 A 2.1 2.3 A 2.3 2.5 A 2.5 2.8 A 2.8 3.0 A 3 3.3 A 3.3 3.5 A 3.5 4.0 A 4 4.5 A 4.5 5.0 A 5 5.5 A 5.5 6.0 6 6.5 A 6.5 7.0 A 7 7.5 A 7.5 8.0 A 8 8.5 A 8.5 9.0 A 9 9.5 A 9.5 10.0 A 10 11.0 A 11 12.0 A 12 13.0 A 13 14.0 A 14 15.0 A 15 16.0 A 16 17.0 A 17 18.0 A 18 19.0 A 19 20.0 A 20 22.0 A 22 25.0 A 25 28.0 A 28 30.0 A 30 Other rated currents on request Other rated currents on request Variants Rated current Config. Code Order Number 15.0 A T13-211-15 4411.0007 20.0 A T13-211-20 4411.0010 30.0 A T13-211-30 4411.0017 18.0 A T13-211-18 4411.0019 25.0 A T13-211-25 4411.0073 T13-211R-30 4411.0221 30.0 A Setting indication l Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/StockCheck/Stock-Check-SCHURTER Packaging Unit 6 20 Pcs Circuit Breakers Configuration key T13-211 Thermal (T- and TA-Line) https://www.schurter.com /PG17_20 Accessories Description 03.07.2019 T-Line Accessories Accessories to T-Line The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Circuit Breakers 7