s 4 ate "XY"-Series > Y yo Non Soldering 3-pole Cable XLRs NO TOOLS Displacement detail After intensive studies and experiments how to best apply non soldering insulation Displacement technology to the termination of standard two pole shieided audio cables with XLR-connectors NEUTRIK is proud to present its XY-Series. The principle benefits are: Upto 40% saving in assembly time Use of same basic elements like shell, compared with conventional methods. strain-relief etc. as our X-Series, a Up to 60% when using the assembly worldwide accepted standard with more machine. than 50 mio pcs. in use. No stripping and tifining of wires. Special shield contact (Pint, {DC not applicable!) No assembly tools or soldering iron necessary - fully field serviceable. Double [D-contacts for highest reliability accepting wires from AWG24 to Choice of shell grounding AWG26. MNMEUTRIK CONNECTORS AUDIO TEST SYSTEMSThe main problem to terminate a shielded - braided or spiral - audio-cable using IDC-technology is the very different nature of the stranded, insulated inner conductors and the shield consisting of many fine bare copper wires. IDC-technology works properly with insulated wires in a defined stranded configuration, but not with an undefined bunch of fine wire. Therefore Neutrik developed a special shield-contact element to solve this problem. Additional benefits of NEUTRIK's solderless: Very easy assembling: just push the two still insulated signal wires into the two |DC-contacts and the twisted shield into the dedicated shield-contact (pin 1). Press the chuck over, which in return cuts the [DC- contacts into the wires and screw-, or press-on the strain relief. No bending and insertion of wire into grooves or strenuous insertion of a "jaw" is necessary. The IDC-contact itself is furnished with two parallel cutting edges, one for 24 and the other for 26 AWG wire, thus also improving the contact reliability. The signal wires are fully protected against any undesirable contact to the shell. The chuck securely fixes cables from 4mm to 7mm. By simply turning the chuck 90 you can choose whether or not the shell will be grounded. Electrical : IDC contacts for wire gauge: AWG24 (0,22mm2) and AWG26 (0,14mm2) Rated current per contacts: 3A Connector contact resistance: initial: < 56ma e IDC contact resistance: initial: < 3m Insulation resistance: initial: > 2*709.0 after salt mist and damp heat test: > 1709.2 Dielectric withstanding voltage: 1'500 VDC Capacity between contacts: <4 pF Mechanical: Cable OD-range: 4mm-7mm Cable pullout force: > 250 N Insertion/withdrawal force: < 20N Materials: Female contact elements: CuSn6 2u Ag or 0,2u Au Male contact elements: CuZn39Pb2 + CuSn6 2u Ag or 0,2u Au Insert material: PA 6.6 gr Chuck: POM Boot: PA 6.6 gr Shell: ZnAl4Cut1 nickel plated or black chromium Latch: St3K32 nickel plated Springs: CK67 Optalloy plated _ Ordering information Type Gender Housing Contacts NC3FXY F Nickel Silver NC3FXY-B F Black Gold NC3FXY-BAG F Black Silver NC3MXY M Nickel Silver NC3MXY-B M Black Gold NC3MXY-BAG M Black Silver HTY Assembly Hand Tool BTY Assembly Bench Tool ATY Assembly Machine Represented by: @ NEUTRIK AG NEUTRIK USA INC. NEUTRIK UK Ltd. NEUTRIK Zirich AG Liechtenstein USA United Kingdom Switzerland Tel 075/237 2424 Tel 908/901 9488 Fax 0983/811441 Tel 01/734 0400 Fax075/232 5393 Fax908/901 8187 Fax 0983/811439 Fax 01/734 3891