05/2003
RFS1006
3.4-3.6 GHz Power Amplifier
Applications
3.4-3.6 GHz fixed-wireless transmitter
Wireless Local Loop transmitter
1
2
3
4
5
6
192021222324
18
17
16
15
14
13
121110987
GND
VD1
GND
GND
VD2
GND
N/C
GND
RF OUT
RF OUT
RF OUT
GND
VG3
GND
VG2
GND
N/C
N/C
N/C
GND
VG1
GND
RF IN
GND
Interstage
Match
Interstage
Match
Input
Match
Functional Block Diagram
Product Description
The RFS1006 power amplifier is a high-power,
high-performance GaAs MESFET IC designed for
use in transmit applications in the 3.4-3.6 GHz
frequency band. With a P1dB of 31 dBm, the
device is ideal as a final stage for fixed wireless
applications requiring high transmit linearity. The
input and output of the PA can be easily matched for
optimum linearity and power performance from 3.4
to 3.6 GHz.
Product Features
31 dBm P1dB
21 dB gain
0.05
2.80 SQ
1.00
0.275
0.225
0.45
0.35
0.50 TYP
TOP VIEW
SIDE VIEW BOTTOM VIEW
1
1 ALL DIMENSIONS ARE IN
MILLIMETERS, ANGLES IN DEGREES.
2 THE TERMINAL #1 IDENTIFIER AND
PAD NUMBERING CONVENTION SHALL
CONFORM TO JESD 95-1 SPP-012
3 LEAD COPLANARITY: 0.05 MAX.
4 DIMENSION APPLIES TO METALLIZED
PAD AND IS MEASURED BETWEEN 0.25
AND 0.30 MM FROM PAD TIP.
4
24
Pin 1
4.00
4.00
INDEX AREA
1.00
0.80
4x4 mm Package Outline
•
•
•
•
05/2003
2
RFS1006
3.4-3.6 GHz Power Amplifier
Specification
Parameter 1
Min. Typ. Max.
Unit Condition
Overall
Frequency Range 3400 3600 MHz
Output P1dB 31 dBm P
IN
= +11dBm
Efficiency at P1dB 35 %
Small Signal Gain 21 dB P
IN
= -20dBm
Gain Flatness ±1.0 dB Entire Band
Harmonics
2
nd
Harmonic -50 dBc
3
rd
Harmonic -30 dBc
Spurious (Stability)
2
-60 dBc/30 kHz P
IN
= -30 to +13 dBm
Reverse Isolation 50 dB
Noise Figure 5.5 dB
Input Return Loss 10 dB
Power Supply
Drain Operating Voltage 5 7 V
Gate Operating Voltage -1.1 V
Current Consumption 570 mA
Gate Leakage Current 150 µA
Note 1: Test Conditions: VDD=7.0V, PIN =+11dBm, Freq. = 3500MHz, VGG = -1.1 V, T =25 °C, unless otherwise specified.
Note 2: Load VSWR is set to 7:1 and the angle is varied 360 degrees.
Absolute Maximum Ratings
Parameter Rating Unit
DC Power Supply 8.0 V
DC Gate Voltage -5.0 min, -0.5 max V
DC Supply Current 1000 mA
Maximum RF input level +14 dBm
Operating Ambient Temperature -40 to +85 °C
Storage Temperature -55 to +150 °C
Ordering Information
Part Number Temp. Range (°C) Package Description Quantity
PRFS-1006-0EVL -40 to +85 Evaluation Board 1
PRFS-1006-0005 -40 to +85 13" Reverse Tape/Reel 2500 pcs.
PRFS-1006-0006 -40 to +85 13" Tape/Reel 2500 pcs.
PRFS-1006-0007 -40 to +85 7" Reverse Tape/Reel 1000 pcs.
PRFS-1006-0008 -40 to +85 7" Tape/Reel 1000 pcs.
PRFS-1006-0009 -40 to +85 Bulk – 4x4 mm 24-pin LPCC 1-999 pcs.
3
05/2003
NOTES
05/2003
4
IMPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product
specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal
introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no
responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders.
WARNING
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application
without written consent is prohibited.
ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059,U.S.A.
Tel: +1(908)668-5000
Fax: +1(908)668-5132
URL: http://www.anadigics.com
E-mail: Mktg@anadigics.com
