3
Electroplating/Anodizing Tape
484 •484L
Product Description 3M™ Electroplating/Anodizing Tape 484 is a conformable and abrasion resistant
vinyl tape for masking various surfaces during electroplating and anodizing
operations. A linered version, 484L, is available for die cutting and large part
application.
Technical Data February, 2010
ASTM Test Method
Adhesion to Steel: 22 oz./in. width (24 N/100 mm) D-3330
Tensile Strength at Break: 23 lbs./in. width (402 N/100 mm) D-3759
Elongation at Break: 220% D-3759
Backing Thickness: 5.6 mils (0.14 mm) D-3652
Total Tape Thickness: 6.7 mils (0.17 mm) D-3652
Liner Thickness: 6.2 mils (0.16 mm) D-3652
Temperature Use Range: Up to 170°F (77°C)
Product Construction
Backing Adhesive Color Standard Roll Length
Translucent vinyl Rubber Yellow bro wn 36 yds. (33 m)
Features • Excellent resistance to most chemicals used in electroplating/anodizing operations.
• Prolonged exposure of tape to elevated bath temperatures, including hot caustics,
above 170°F (77°C) may cause weakening of the adhesive bond.
• Resists most common solvents, care should be taken to avoid ketones, chlorinated
hydrocarbons, and esters, found in many lacquer thinners, degreasers, paint
strippers, etc. which may cause the tape backing to swell or curl.
• Tape can be used at oven temperatures up to 220°F (104°C) for 30 minutes with
clean removal.
• Linered version allows pieces to be custom cut to fit unique shapes. The liner also
allows easy handling of 484 tape for large surface applications.
Typical Physical
Properties Note: The follo wing technical information and data should be considered representative
or typical only and should not be used for specification purposes.
A pplication Ideas • Mask various surfaces during electroplating and anodizing.
3M™Electr oplating/Anodizing Tape
484 • 484L
3M is a trademark of 3M Company.
Printed in U.S.A.
©3M 2010 70-0709-5022-8 (2/10)
Recycled Paper
40% pr e-consumer
10% post-consumer
Shelf Life To obtain best performance, use this product within 18 months from date of
manufacture.
Storage Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% R.H. in
the original carton.
The technical information, recommendations and other statements contained in this document are
based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such
information is not guaranteed.
Technical Information
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product
literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time
3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY
OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s
option, replacement of the 3M product or refund of the purchase price.
Warranty,
Limited Remedy,
and Disclaimer
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.
Limitation of Liability
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001:2000 standards.
ISO 9001:2000
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use
and performance of a 3M product in a particular application. Given the variety of factors that can affect
the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user’s method of application.
Product Use
3
Industrial Adhesives and Tapes Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (Fax)
www.3M.com/industrial
