SGA4263Z SGA4263ZDC to 3500MHz, Cascadable SiGe HBT MMIC Amplifier DC to 3500MHz, CASCADABLE SiGe HBT MMIC AMPLIFIER Package: SOT-363 Product Description Features The SGA4263Z is a high performance SiGe HBT MMIC Amplifier. A Darlington configuration featuring one-micron emitters provides high FT and excellent thermal performance. The heterojunction increases breakdown voltage and minimizes leakage current between junctions. Cancellation of emitter junction non-linearities results in higher suppression of intermodulation products. Only two DC-blocking capacitors, a bias resistor, and an optional RF choke are required for operation. GaAs HBT 16 GaAs MESFET -10 ORL 8 -20 IRL 4 GaAs pHEMT -30 Return Loss (dB) 12 Gain (dB) 0 GAIN InGaP HBT SiGe HBT Gain & Return Loss vs. Frequency VD= 3.2 V, ID= 45 mA (Typ.) Si BiCMOS Broadband Operation: DC to 3500MHz Cascadable 50 Operates from Single Supply Low Thermal Resistance Package Applications Optimum Technology Matching(R) Applied SiGe BiCMOS PA Driver Amplifier Cellular, PCS, GSM, UMTS IF Amplifier Wireless Data, Satellite Si CMOS 0 Si BJT -40 0 1 GaN HEMT 2 3 4 Frequency (GHz) 5 6 RF MEMS Parameter Small Signal Gain Min. 12.5 Output Power at 1dB Compression Output Third Intercept Point Specification Typ. 14.0 12.7 12.4 14.2 12.5 29.3 25.7 3500 Max. 15.5 Unit dB dB dB dBm dBm dBm dBm MHz Condition 850MHz 1950MHz 2400MHz 850MHz 1950MHz 850MHz 1950MHz >10dB Bandwidth Determined by Return Loss Input Return Loss 31.3 dB 1950MHz Output Return Loss 13.8 dB 1950MHz Noise Figure 3.7 dB 1950MHz Device Operating Voltage 2.9 3.2 3.5 V Device Operating Current 41 45 49 mA Thermal Resistance 255 C/W (Junction - Lead) Test Conditions: VS =8V, ID =45mA Typ., OIP3 Tone Spacing=1MHz, POUT per tone=-5dBm, RBIAS =110, TL =25C, ZS =ZL =50 RF MICRO DEVICES(R), RFMD(R), Optimum Technology Matching(R), Enabling Wireless ConnectivityTM, PowerStar(R), POLARISTM TOTAL RADIOTM and UltimateBlueTM are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. (c)2006, RF Micro Devices, Inc. DS111011 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 1 of 6 SGA4263Z Absolute Maximum Ratings Parameter Rating Unit Max Device Current (ID) 90 Max Device Voltage (VD) 5 V Max RF Input Power +18 dBm Max Junction Temp (TJ) +150 C -40 to +85 C +150 C Operating Temp Range (TL) Max Storage Temp Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. mA The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias Conditions should also satisfy the following expression: IDVD <(TJ -TL)/RTH, j-l Typical Performance with 2.45GHz Application Circuit Parameter Unit 100 MHz 500 MHz 850 MHz 1950 MHz Small Signal Gain dB 14.1 13.9 14.0 12.7 Output Third Order Intercept Point dBm 29.5 29.3 25.7 Output Power at 1dB Compression dBm 14.1 14.2 12.5 Input Return Loss dB 27.5 31.8 29.4 31.3 Output Return Loss dB 23.4 22.0 21.7 13.8 Reverse Isolation dB 17.7 18.3 18.5 19.0 Noise Figure dB 3.6 3.4 3.7 Test Conditions: VS =8V, ID =45mA Typ., OIP3 Tone Spacing=1MHz, POUT per tone=-10dBm, RBIAS =100, TL =25C, ZS =ZL =50 OIP3 vs. Frequency P1dB vs. Frequency VD=3.2 V, ID= 45 mA (Typ.) VD= 3.2 V, ID= 45 mA (Typ.) 3500 MHz 12.4 23.6 11.3 33.1 12.2 19.0 4.3 11.3 18.3 11.7 18.2 18 35 TL 15 P1dB (dBm) 30 OIP3 (dBm) 2400 MHz 25 20 12 9 TL=+25C TL=+25C 15 6 0 0.5 1 1.5 2 Frequency (GHz) 2.5 3 0 0.5 1 1.5 2 Frequency (GHz) 2.5 3 Noise Figure vs. Frequency VD= 3.2 V, ID= 45 mA (Typ.) Noise Figure (dB) 5 4 TL=+25C 3 2 1 TL=+25C 0 0 2 of 6 0.5 1 1.5 2 Frequency (GHz) 2.5 3 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS111011 SGA4263Z Typical RF Performance Over Temperature ( Bias: VD= 3.2 V, |S | vs. Frequency -10 S11(dB) S21(dB) 11 0 15 10 5 TL 0 0 1 -30 +25C -40C +85C 2 3 4 Frequency (GHz) -20 +25C -40C +85C TL -40 5 6 0 1 |S | vs. Frequency 2 3 4 Frequency (GHz) 5 6 |S | vs. Frequency 12 -10 22 0 -10 S22(dB) -15 S12(dB) ) |S | vs. Frequency 21 20 ID= 45 mA (Typ.) -20 -25 -30 0 DS111011 1 2 3 4 Frequency (GHz) -30 +25C -40C +85C TL 5 -20 +25C -40C +85C TL -40 6 0 1 2 3 4 Frequency (GHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 5 6 3 of 6 SGA4263Z Pin 3 1, 2, 4, 5 6 Function RF IN GND RF OUT/BIAS Description RF input pin. This pin requires the use of an external DC-blocking capacitor chosen for the frequency of operation. Connection to ground. For optimum RF performance, use via holes as close to ground leads as possible to reduce lead inductance as close to ground leads as possible. RF output and bias pin. DC voltage is present on this pin, therefor a DC-blocking capacitor is necessary for proper operation. Suggested Pad Layout Preliminary Dimensions in inches [millimeters] RF OUT RF IN Notes: 1. Provide a large ground pad area under device pins 1, 2, 4, & 5 with many plated via holes as shown. 2. Dimensions given for 50 Ohm RF I/O lines are for 31 mil thick Getek. Scale accordingly for different board thicknesses and dielectric contants. 3. We recommend 1 or 2 ounce copper. Measurements for this data sheet were made on a 31 mil thick Getek with 1 ounce copper on both sides. Package Drawing Dimensions in inches (millimeters) Refer to drawing posted at www.rfmd.com for tolerances. 4 of 6 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS111011 SGA4263Z Application Schematic Frequency (Mhz) VS R BIAS 1 uF 1000 pF CD LC 3 RF in CB 1,2 SGA4263Z 4,5 Reference Designator 500 850 1950 2400 3500 CB 220 pF 100 pF 68 pF 56 pF 39 pF CD 100 pF 68 pF 22 pF 22 pF 15 pF LC 68 nH 33 nH 22 nH 18 nH 15 nH Recommended Bias Resistor Values for ID=45mA RBIAS=( VS-VD ) / ID 6 RF out CB Supply Voltage(VS) 6V RBIAS 62 8V 110 10 V 150 12 V 200 Note: RBIAS provides DC bias stability over temperature. Evaluation Board Layout Mounting Instructions: 1. Use a large ground pad area near device pins 1, 2, 4, and 5 with many plated through-holes, as shown. 2. We recommend 1 or 2 ounces copper. Measurements for this data sheet were made on a 31mil thick FR-4 board with 1 ounce cooper on both sides. DS111011 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 5 of 6 SGA4263Z Part Identification Marking 6 5 4 1 2 3 Ordering Information Ordering Code 6 of 6 Description SGA4263Z 7" Reel with 3000 pieces SGA4263ZSQ Sample bag with 25 pieces SGA4263ZSR 7" Reel with 100 pieces SGA4263ZPCK1 850MHz, 8V Operation PCBA with 5-piece sample bag 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS111011