P600A P600M 1 of 3 © 2002 Won-Top Electronics
P600A – P600M
6.0A SILICON RECTIFIER
Features
! Diffused Junction
! Low Forward Voltage Drop
! High Current Capability A B A
! High Reliability
! High Surge Current Capability
Mechanical Data C
! Case: Molded Plastic D
! Terminals: Plated Leads Solderable per
MIL-STD- 202, Met hod 208
! Polarity: Cathode Band
! Weight: 2.1 grams (approx.)
! Mounting Position: Any
! Marking: Type Number
! Epoxy: UL 94V-O rate flame retardant
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specifi ed
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derat e current by 20%.
Characteristic Symbol P600A P600B P600D P600G P600J P600K P600M Unit
Peak Repetit i ve Revers e Vol tage
Working Peak Reverse Vol tage
DC Blocking Voltage
VRRM
VRWM
VR50 100 200 400 600 800 1000 V
RMS Reverse Vol tage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current
(Note 1) @T
A = 60°C IO6.0 A
Non-Repetiti ve P eak Forward Surge Current
8.3ms Si ngl e half sine-wave superimposed on
rated load (JEDE C Method) IFSM 400 A
Forward Voltage @IF = 6.0A VFM 1.0 V
Peak Reverse Current @TA = 25°C
At Rated DC Blocki ng Vo l t age @TA = 100°C IRM 5.0
1.0 µA
mA
Typical Junction Capacitance (Note 2) Cj150 pF
Typical Therm al Resis t ance Juncti on to Ambient
(Note 1) RJA 20 K/W
Operating Tem perature Range Tj-50 to +150 °C
Storage Temperat ure Range TSTG -50 to +150 °C
*Glass passivated forms are available upon request
Note: 1. Leads maintained at ambient temperat ure at a distanc e of 9.5mm from the case
2. Measured at 1.0 MHz and applied reverse volt age of 4.0V D.C.
WTE
PO WER SEM IC OND UCTOR S
P-600
Dim Min Max
A25.4
B8.60 9.10
C1.20 1.30
D8.60 9.10
All Dimensions in mm
P600AP600M 2 of 3 © 2002 Won-Top Electronics
1
2
3
4
5
I , AVERAGERECTIFIED CURRENT (A)
O
T , AMBIENT TEMPERATURE (ºC)
Fi
g
. 1 Forward Current Deratin
g
Curve
A
6
7
8
25
050 75 100 125 150 175 200
0
0.1
1.0
100
0.6 1.0 1.4 1.8
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fi
g
. 2, Typical Forward Characteristics
F
10
0.2
0
Pulse Width = 300 s
2% Duty Cycle µ
T = 25ºC
j
10
100
1000
110 100
C,CAPACITANCE(pF)
j
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
R
T = 25°C
f = 1MHz
j
0
100
200
300
400
500
110 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBEROF CYCLES AT 60Hz
Fi
g
. 3 Maximum Non-Repetitive Peak Forward Sur
g
e Current
8.3ms Single Half Sine-Wave
JEDEC Method
P600A P600M 3 of 3 © 2002 Won-Top Electronics
ORDERING INFORMATION
Product No.!
!!
!Package Type Shipping Quantity
P600A-T3 P-600 800/Tape & Reel
P600A P-600 250 Units/Box
P600B-T3 P-600 800/Tape & Reel
P600B P-600 250 Units/Box
P600D-T3 P-600 800/Tape & Reel
P600D P-600 250 Units/Box
P600G-T3 P-600 800/Tape & Reel
P600G P-600 250 Units/Box
P600J-T3 P-600 800/Tape & Reel
P600J P-600 250 Units/Box
P600K-T3 P-600 800/Tape & Reel
P600K P-600 250 Units/Box
P600M-T3 P-600 800/Tape & Reel
P600M P-600 250 Units/Box
Products listed in bold are WTE Preferred devices.
!T3 suffix refers to a 13” reel.
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer . WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsi ung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http://www.wontop.com