ECONOLINE
DC/DC-Converter
with 3 year Warranty
R0.5S_D
Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) 0.5 Watt SMD
Isolated
Single or Dual
Output
Derating-Graph
(Ambient Temperature)
●1 : 1 Input Range
●0.5W SMD Package
●Efficiency up to 80%
●Approved for Medical Applications
●1kVDC and 3 kVDC Isolation Option
●Operating Temperature from -40°C to +100°C
Features
Unregulated
Converter
Part Input Output Output Efficiency Max
Number Voltage Voltage Current typ. Capacitive
SMD (VDC) (VDC) (mA) (%) Load(1)**
R0.5S**-3.305* 3.3 5 100 80 1000µF
R0.5S**-3.312* 3.3 12 42 77 150µF
R0.5S**-3.315* 3.3 15 33 77 150µF
R0.5S**-0505* 5 5 100 72 1000µF
R0.5S**-0512* 5 12 42 77 150µF
R0.5S**-0515* 5 15 33 79 150µF
R0.5S**-1205* 12 5 100 74 1000µF
R0.5S**-1212* 12 12 42 75 150µF
R0.5S**-1215* 12 15 33 75 150µF
R0.5S**-2405* 24 5 100 75 1000µF
R0.5S**-2412* 24 12 42 77 150µF
R0.5S**-2415* 24 15 33 77 150µF
R0.5D**-3.305* 3.3 ±5 ±50 79 ±470µF
R0.5D**-3.312* 3.3 ±12 ±21 76 ±68µF
R0.5D**-3.315* 3.3 ±15 ±17 77 ±68µF
R0.5D**-0505* 5 ±5 ±50 79 ±470µF
R0.5D**-0512* 5 ±12 ±21 77 ±68µF
R0.5D**-0515* 5 ±15 ±17 79 ±68µF
R0.5D**1205* 12 ±5 ±50 76 ±470µF
R0.5D**1212* 12 ±12 ±21 75 ±68µF
R0.5D**1215* 12 ±15 ±17 75 ±68µF
R0.5D**2405* 24 ±5 ±50 77 ±470µF
R0.5D**2412* 24 ±12 ±21 75 ±68µF
R0.5D**2415* 24 ±15 ±17 75 ±68µF
Refer to Application Notes
*add Suffix “/H” for 3kVDC Isolation Voltage
*add Suffix “/P“ for continuous short circuit protection
*add Suffix “-R“ for tape & reel packing
For more details and dimensions of the tapes and reels see Application Notes
R0.5S**:
**without marking denotes 5 pins out of 8 fitted (includes „/H“ option)
**with marking 8 denotes 8 pins out of 8 fitted („/H“ option not available)
**with marking 12 denotes 10 pins out of 12 fitted (includes „/H“ option)
R0.5D**:
**without marking denotes 6 pins out of 10 fitted (includes „/H“ option)
**with marking 10 denotes 10 pins out of 10 fitted („/H“ option not available)
**with marking 12 denotes 10 pins out of 12 fitted (includes „/H“ option)