Page2 of 4
Performance Specications
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Phase Stability (continued)
Parameter Min Typ Max Units Notes
TDEV 1s 0.015 ns Wander Generation per GR1244, system
performance when locked through a
1mHz loop bandwidth, see typical perfor-
mance data.
TDEV 10s 0.13 ns
TDEV 100s 1.5 ns
TDEV 1000s 5.0 ns
Phase Noise
Parameter Min Typ Max Units Notes
Phase Noise at 1 Hz Oset -85 -60 dBc/Hz At 20MHz
Phase Noise at 10 Hz Oset -110 -90 dBc/Hz
Phase Noise at 100 Hz Oset -130 -115 dBc/Hz
Phase Noise 1 kHz Oset -143 -130 dBc/Hz
Phase Nosie at 10 kHz Oset -150 -145 dBc/Hz
RF Output
Signal LVCMOS
Load 15 pF ±10%
Rise Time < 10 ns @ 10% to 90% Vout
Fall Time <10 ns @90% to 10% Vout
Duty Cycle 45/55 % @ 1.65 V
V Low x < 0.4 V
V High x > 2.4 V
Supply
Supply Voltage (VS) 3.3±10% V
Current consumption < 330 mA Steady state, @ VSnom, 25C
Current consumption < 757 mA During warm up, @ VS
Additional Parameters
Warm Up Time < 3 minutes @ 25C to nal frequency
Absolute Maximum Ratings
Min Max Units
Operating temperature range -40 85 C
Storage temperature range -50 85 C
Supply Voltage 5.5 V
Additional Environmental Conditions
Parameter Description
Rapid temperature
changes
MIL-883-1010 Cond B 1000 cycles -55/125C
Vibration MIL-STD-883 Meth 2007 Cond A 20G 20-2000Hz 4x in each 3axis 4 min
Shock JESD22-B104-B 100G 1,5ms 6 shocks in each direction
Solderability J_STD_002C Cond A, Through hole device/ Cond. B, SMD 255C (diving time
50,5sec.) Dip+Look with 8h damp pre-treatment: solder wetting >95%
Solvent resistance MIL-STD-883 Meth 2015 Solv. 1,3,4
ESD HBM JESD22-A114-E Class 2 10* 2000V
Moisture Sensit. Level 1 JESD22-A113-B
RoHS compliance 100% RoHS 6 compliant
Washable washable device