Toggles Series CK Rockers General Specifications Electrical Capacity (Resistive Load) Pushbuttons Power Level: Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Other Ratings F Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Static Capability: Nominal Operating Torque: Contact Timing: Angle of Throw: Materials & Finishes Keys for CKM: Keys for CKL: Housing/Bushing: Base: Contact Terminals: Common Terminals: Movable Contactor: Movable Contacts: Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: Installation Mounting Torque: Soldering Time & Temperature: 3A @ 250V AC 20 milliohms maximum 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 30,000 cycles minimum 10,000 cycles minimum Withstands 15 kilovolts minimum ESD minimum (for CKM models only) 16mm Bushing (CKM models): .04 mNm (5.67 oz*in) for Flat Key .08 mNm (11.33 oz*in) for Tubular Key 19mm Bushing (CKL models): .05 mNm (7.08 oz*in) for Flat Key .07 mNm (9.91 oz*in) for Tubular Key Break-before-make 90 for 2-position & 45 for 3-position Brass with nickel plating with ABS handle Brass with nickel plating for tubular key; brass with chrome plating for flat key Glass fiber reinforced PBT for CKM models; zinc alloy with chrome plating for CKL LCP (Liquid Crystal Polymer) Copper with silver plating Copper with silver plating Copper Silver -25C through +70C (-13F through +158F) 90 ~ 95% humidity for 240 hours @ 40C (104F) for CKM; 90 ~ 95% humidity for 96 hours @ 40C (104F) for CKL 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm for CKM or 0.7mm for CKL traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration for CKM; 30G (294m/s2) acceleration for CKL; (CKM & CKL tested in 6 right angled directions, with 5 shocks in each direction) 1.5 Nm (13.28 lb*in) maximum Manual Soldering: See Profile A in Supplement section. Supplement Accessories High Security Keylocks F4 www.nkk.com Toggles Series CK High Security Keylocks Rockers Distinctive Characteristics Pushbuttons High insulating material for 16mm CKM models withstands over 15 kilovolts of electrostatic discharge, thus providing antistatic feature. Vertically rotating switching mechanism combines with self-cleaning sliding contacts for high reliability and long operating life. 16mm and 19mm diameter bushings available. F Rotaries CKL and CKM on-off-on models with tubular keys have push-and-lock mechanism which allows contactor to drop and slide over stationary contacts. Keylocks Programmable Illuminated PB Rugged, die cast housing 19mm CKL models designed for higher security requirements. Slides Available in both flat and tubular key styles; flat key is reversible for easier setting. Tactiles Epoxy sealed terminals prevent entry of flux and other contaminants. Actual Size CKM with Tubular Key Tilt Interior construction provides seal for contact area. Supplement Accessories Indicators Touch High dielectric strength of 1,500 volts between contacts and case. www.nkk.com F5 Series CK Toggles High Security Keylocks Rockers TYPICAL SWITCH ORDERING EXAMPLE M 1 2A F W 01 Keys Bushings M 16mm Diameter L 19mm Diameter Poles 1 SPDT Terminals F Flat T Tubular 01 Solder Lug * * Wire harness & cable assemblies offered only in Americas F Circuits & Key-Removable Positions Code Pos. 1 Pos. 2 Pos. 3 Key Removes 2A ON NONE ON Positions 1 and 3 2B ON NONE ON Position 1 3E ON OFF ON Position 2 Contact Material W Silver Rated 3A @ 250V AC Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons CK DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Touch Tilt CKM12AFW01 Indicators One key supplied with each switch Accessories SPDT ON-NONE-ON Circuit Key Removable in Positions 1 and 3 16mm Diameter Bushing Silver Contacts Rated 3A @ 250V AC Supplement Solder Lug Terminals F6 www.nkk.com Series CK Toggles High Security Keylocks POLES, CIRCUITS & KEY-REMOVABLE POSITIONS Connected Terminals Model Pos 1 Pos 2 Pos 3 Pos 1 CKM12A CKL12A ON NONE ON COM-1 Pos 3 = Maximum Arc Schematic POS 1 ____ COM-2 COM ON NONE ON COM-1 Pushbuttons 3 CKM12B CKL12B SPDT Pos 2 POS 1 ____ COM-2 1 2 3 COM OFF ON COM-1 OPEN 2 COM-2 1 POS 1 Programmable Illuminated PB ON OP E N CKM13E CKL13E SPDT 3 2 KEYS Tubular Key (must be pressed inward to actuate) AT4147 for CKM 16mm Brass with Nickel Plating key base & ABS key handle AT4153 for CKL 19mm Brass with Chrome Plating (crosshatch texture on handle) AT4146 for CKM 16mm Brass with Nickel Plating key base & ABS key handle AT4152 for CKL 19mm Brass with Nickel Plating (smooth) One key provided with each switch (no master key available) For ordering additional keys, indicate the same key number that is engraved on the face of your switch. One key provided with each switch (no master key available) For ordering additional keys, indicate the same key number that is engraved on the face of your switch. Randomly assigned key number (001 through 010 for CKM models & 001 through 025 for CKL models). Randomly assigned key number (001 through 025 for CKM models & 001 through 050 for CKL models). AT4146 (3.5) .138 (22.3) .878 (40.8) 1.606 (20.0) .787 AT4152 (25.0) .984 (33.5) 1.319 (7.0) Dia .276 (10.5) Dia .413 Tilt (20.0) .787 AT4153 (19.0) .748 (1.5) .059 (49.3) 1.941 (22.5) .886 (35.5) 1.398 (9.6) Dia .378 (1.8) .071 Touch (3.5) .138 (26.0) 1.024 Indicators (20.0) .787 Tactiles Typical Key Ordering Example: AT4146-001 Typical Key Ordering Example: AT4153-001 AT4147 F Rotaries T Flat Key Slides F Solder Lug Terminals Solder Lug Terminal for CKM Epoxy Seal (5.0) .197 (2.7) .106 (2.4) .094 (1.2) .047 Thk = (0.8) .031 www.nkk.com (5.5) .217 Epoxy Seal Solder Lug Terminal for CKL (3.1) .122 (1.4) .055 Thk = (0.8) .031 (2.8) .110 Supplement 01 Silver over Silver Power Level 3A @ 250V AC Accessories CONTACT MATERIALS, RATINGS & TERMINALS W Keylocks SPDT = Key Removable * = Not Removable (Terminal numbers are on switch) Rockers Key Positions Pole & Throw F7 Series CK Toggles High Security Keylocks TYPICAL SWITCH DIMENSIONS 16mm Bushing * Flat Key POS 1 POS 3 (0.9) .035 (1.4) .055 COM (4.0) .157 (16.0) .630 (5.0) .197 (35.2) 1.386 POS 1 45 45 2 0 (0.9) .035 (20.0) .787 (24.0) .945 (19.0) Dia .748 F COM 002 POS 3 2 45 Angular Throw (1.2) x (2.4) .047 x .094 M16 P1 POS 2 (14.2) .559 1 Programmable Illuminated PB (19.0) Dia .748 (20.0) .787 (24.0) .945 1 (20.0) .787 006 Rockers Pushbuttons 006 2 90 Angular Throw 0 (4.0) .157 (16.0) .630 (35.2) 1.386 (5.0) .197 (14.2) .559 CKM12AFW01 16mm Bushing * Tubular Key Slides Tactiles (11.0) .433 (1.2) x (2.4) .047 x .094 M16 P1 004 2 90 Angular Throw 90 POS 3 004 COM (15.0) .591 (25.0) .984 (29.0) 1.142 (19.0) Dia .748 (4.0) .157 (16.0) .630 (35.2) 1.386 (5.0) .197 POS 1 45 01 7 POS 3 COM 017 Touch Tilt 45 Indicators (25.0) .984 (29.0) 1.142 (19.0) Dia .748 CKM13ETW01 (1.2) x (2.4) .047 x .094 M16 P1 POS 2 (14.2) .559 2 45 Angular Throw 1 POS 1 1 Rotaries Keylocks (1.2) x (2.4) .047 x.094 M16 P1 90 (4.0) .157 (16.0) .630 (35.2) 1.386 (5.0) .197 (14.2) .559 PANEL CUTOUT & STANDARD HARDWARE FOR 16MM BUSHING Accessories (16.0) Dia .630 Supplement Maximum Effective Panel Thickness: .469" (11.9mm) (14.6) .575 F8 AT016 16mm Hex Mounting Nut for CKM 1 included with each switch Steel www.nkk.com M16 P1 (2.5) .098 (19.0) .748 Series CK Toggles High Security Keylocks TYPICAL SWITCH DIMENSIONS (29.8) 1.173 (22.0) Dia .866 2 (0.7) .028 C (5.4) .213 (1.0) .039 (17.0) .669 POS 1 45 (5.5) .217 (40.0) 1.575 OM Pushbuttons (22.3) .878 (16.8) .661 Programmable Illuminated PB 005 1 90 POS 3 (1.4) x (2.8) .055 x .110 M19 P1 POS 2 POS 3 C 1 2 15 015 45 0 45 Angular Throw (1.4) x (2.8) .055 x .110 M19 P1 Rockers POS 1 005 90 Angular Throw 19mm Bushing * Flat Key OM (0.7) .028 (20.0) .787 (29.8) 1.173 (22.0) Dia .866 (17.0) .669 (5.4) .213 (40.0) 1.575 (5.5) .217 (16.8) .661 CKL12AFW01 C Rotaries Slides (19.0) .748 OM (22.5) .886 (30.5) 1.201 (22.0) Dia .866 (5.4) .213 (17.0) .669 POS 1 (5.5) .217 (1.4) x (2.8) .055 x .110 M19 P1 POS 2 (16.8) .661 Tilt 45 (40.0) 1.575 Tactiles 008 008 POS 3 C 1 45 2 OM (22.0) Dia .866 (5.4) .213 (17.0) .669 (40.0) 1.575 (5.5) .217 (16.8) .661 . CKL13ETW01 Indicators (22.5) .886 (30.5) 1.201 Touch 042 (19.0) Dia .748 Maximum Effective Panel Thickness: .496" (12.6mm) (17.2) .677 AT019 19mm Hex Mounting Nut for CKL 1 included with each switch Steel www.nkk.com Accessories PANEL CUTOUT & STANDARD HARDWARE FOR 19MM BUSHING M19 P1 (3.4) .134 Supplement 45 Angular Throw (1.4) x (2.8) .055 x .110 M19 P1 2 POS 3 19mm Bushing * Tubular Key 1 90 POS 1 Angular 90 Throw F Keylocks (22.0) .866 F9