Rated Operating Current Input Rated Max. Max. Static Noise Mass
MODEL Voltage Voltage Power Speed Air Flow Pressure
(V) (V) (A)*1 (W)*1 (min-1)*1 CFM*1 (m3/min)*1 in H2O (Pa)*1 (dB)*1 (g)
FBA09A 12L 12 7.0 ~ 13.8 110 1.32 2200 42.7 1.21 .10 25.5 27.0 110
FBA09A 12M 12 7.0 ~ 13.8 150 1.80 2450 48.0 1.36 .11 29.4 30.0 110
FBA09A 12H 12 7.0 ~ 13.8 255 2.70 2950 56.8 1.61 .16 42.1 35.0 110
FBA09A 24L 24 14.0 ~ 27.6 80 1.92 2200 42.7 1.21 .10 25.5 27.0 110
FBA09A 24M 24 14.0 ~ 27.6 110 2.64 2450 48.0 1.36 .11 29.4 30.0 110
FBA09A 24H 24 14.0 ~ 27.6 140 3.36 2900 56.8 1.61 .16 42.1 35.0 110
Rotation: Clockwise Airfl ow Outlet: Air Out Over Struts *1: Average Values in Free Air
EMINEBEA.COM
Units: inch
(mm)
FBA09A (92 X 25.5L)
Failure Rate: 10%
50,000 Hours (40°C, 65%RH)
Allowable Ambient Temperature Range:
-10°C ~ +70°C (65%RH) (Operating)
-40°C ~ +75°C (65%RH) (Storage)
(non-condensing environment)
Bearing: Hydro Wave Bearing
3.25
(82.5)
3.62
(92)
3.25
(82.5)
3.62
(92)
1.00
(25.5)
- Pin
+ Pin
LR99935
inlet outlet NAME
PLATE
Housing with solid corner type are available.
ROTATION
.177
8 – (f4.5)
FLOW
.157
(4)
.157
(4) 60
40
20
3000
2000
1000
01
xä £ää
23
12V(24V)-L
12V(24V)-M
12V(24V)-H
Air Flow
(m3/min)
N
®
Normal Speed
(min-1)
(Pa)
ÊÓ"
Static Pressure
Ps
°ÓÎ
°£x
°äÇ
3.94
(f100)
3.25
(82.5)
3.54
(90)
3.54
(90)
3.25
(82.5)
3.54
(90)
3.25
(82.5)
.185
4 – (f4.7)
INLET SIDE
4.09
(f104)
3.25
(82.5)
3.54
(90)
OUTLET SIDE
.185
4 – (f4.7)
Panasonic
FEATURES
LOCKED ROTOR ALARM SIGNAL
Signal given when
fan is running
VH
VL
1 Revolution
2PPR
VH Axial models 1BS
FBK04F
FAL
FCB
S
S
S
VL V goes VL to VH
Signal given when
fan is locked up Available
Models Part Number
Suffix
2 PULSE PER REVOLUTION SIGNAL
Signal given when
fan is running
VH
VL
If fan locks on VH, signal
stays locked. If fan locks
on VL, signal stays at VL
for a few hundred MS,
then moves to VH.
(A:B ˜1:5; A ≥ 100MS)
Axial models
except:
FBK04F
FBA06T
FBA08T
FCB
FAL
1BX
Signal given when
fan is locked up Available
Models Part Number
Suffix
AB
VL Lock
In Panaflo FBA series models,
a locked rotor alarm sensor is
available in all models.
For Blowers and Crossflo fans,
a locked sensor can be provided
as an option.
A pulse sensor that transmits
signals when the motor rotates
is also available as an option.
The 2 pulse per revolution
sensor output is available in all
FBA Series models except the
15 mm “T” versions.
Specifications of Various Sensors
Panaflo Built-in Connector System
Lead Wire Connectors:
Style: MASS TERMINATION (standard)
AMP P/N 173977-3
CRIMP TYPE (this style is a 2 piece assembly)
AMP P/N 175778-3 (housing)
AMP P/N 175102-1 (terminal)
Notes:
•Connector style effects lead wire guage.
Please refer to fan specs for further details.
•All axial fans except the FBA06T, FBA08T and FBKO4F
versions come standard with the mass termination
connector. The FBA06T, FBA08T and FBKO4F fan leads are
connected directly to the PC board in the fan assembly.
•All FCB Crossflo models and FAL Blower fan leads are
soldered directly to the PC board in the fan assembly.
2
High Reliability with HWB (Hydro Wave Bearing)
Radial Direction Axial Direction
shaft
thrust plate
bearing (b) HWB
washer
shaftstop ringthrust plateHWB
Figure 1: Pressure distribution in each load direction.
Figure 1: Construction of HWB
Panaflo’s unique hydrowave bearing (HWB) addresses the traditional weakness of sleeve bearings…axial fric-
tion. By utilizing our unique HWB system, the thrust plate “floats” on a circulating film of oil, which greatly
reduces the axial friction and the bearing’s deterioration. The HWB pattern on the bearing virtually eliminates
thrust plate contact which is depicted above.
As the shaft rotates it acts as a pump constantly circulating the oil in the radial, as well as the axial direction.
The sealed system and reservoirs of oil maintain the proper lubrication to minimize mechanical contact and
prolong the fan’s life expectancy. The radial direction analysis shown above is essentially the same as a tradi-
tional sleeve bearing. Panasonic’s unique HWB reduces the axial contact.
3
Panasonic
COMMON SPECIFICATIONS
4
Protection
•Locked rotor protection circuits
•Automatically restarts in a few seconds
•Reverse voltage protection
Insulation Resistance
•10M Ωminimum at 500v DC (frame to leads)
Dielectric Strength
•500v AC (50/60Hz) for 1 minute (frame to leads)
Plastic Rating
•All Panaflo fans are manufactured with a UL94V-0 plastic (flammability)
Insulation Class
•JIS Class E (120° C)
•VDE Class E (90° C)
•UL Class A (105° C)
•CSA Class A (105° C)
Noise Data
The noise data is measured at 1 meter from the air intake side of the fan
suspended in a semi-anechoic chamber (background noise 13dB-A max.).
Construction with and without Solid Corner Housing
Panaflo fans are available in two different versions for mounting: with solid corner
housing and without. Specific mounting methods and applications require the use
of solid corners. Select the appropriate housing for your application. Some mod-
els may be available only with solid corner housing. For details, please refer to the
corresponding page for each model.
With Solid Corner Without Solid Corner
Microphone
Microphone
Microphone
* Distance 1m.
Noise Data
5
PANAFLO FAN PRODUCT DESIGNATION CODE
Panaflo Fan
FBAO8A12H1AS
Bearing Type
A: HWB (Hydro Wave)
K: Ball Bearing (40mm Only)
Housing Size
04: 40 x 40mm
06: 60 x 60mm
08: 80 x 80mm
09: 92 x 92mm
12: 120 x 120mm
Housing Thickness
A: 25.5mm
T: 15mm (Thin)
G: 38mm
F: 20mm
Rated Voltage
12: 12 VDC
24: 24 VDC
05: 5 VDC
Speed
L: Low
M: Middle
H: High
U: Ultra High
V: Variable (Option) Lead Wire (FBA Only)
A: Standard 2 leads (GND, PWR)
B: Standard 3 leads (GND, PWR, Signal)
C: 3rd lead thermal sensor (variable)
Option
S: Locked rotor alarm sensor
Z: Solid corner housing
X: 2 PPR speed sensor (TAC Output)
O: S + Z
1: Hub mounted thermal sensor
Terminal (FBA Only)
1: With leads
: No leads
Motor Type
FB: Panaflo
(DC Axial-flow fan)
Crossflo Fan
FCB34AD24S
Option
S: Locked rotor alarm sensor
S
Option
S: Locked rotor alarm sensor
Fan Outside Diameter
34: Ø34 mm Rated Voltage
12: 12 VDC
24: 24 VDC
Fan Motor Length
AA: 134.50mm
AB: 173.50mm
AC: 212.50mm
AD: 251.50mm
AE: 290.50mm
AF: 329.50mm
Motor Type
FCB: Brushless Crossflo Fan
Blowers
FAL6F12LH
Speed
LL: Low Speed
LH: High Speed
Model Change
Blower Size
3—50 x 50mm (Ball Bearing)
5—76 x 76mm (Hydro Wave)
6—109 x 114mm (Hydro Wave)
Rated Voltage
05: 5 VDC
12: 12 VDC
24: 24 VDC
Motor Type
FAL: Brushless Fan
(variable)
Panasonic
Type Model Rated Operating Rated Rated Nominal Maximum Maximum Noise Safety
and Size Voltage Voltage Current Input Speed Air Flow Air Pressure (dB-A) Standard
(V) (V) (mA) (W) (r/min) (m3/min) (CFM) (mmh20) (Pa) UL CSA
FBK04F FBK04F05L 5 4.5—6.0 120 0.60 4700 0.11 3.9 2.50 24.5 24.0 • •
40mm FBK04F05H 5 4.5—6.0 280 1.40 7500 0.19 6.7 6.60 64.7 33.0 • •
DC axial fans FBK04F12L 12 7.0—13.8 75 0.90 4700 0.11 3.9 2.50 24.5 23.0 • •
FBK04F12H 12 7.0—13.8 150 1.80 7500 0.19 6.7 6.60 64.7 32.0 • •
FBK04F12U 12 7.0—13.8 170 2.04 9500 0.26 9.2 12.00 117.7 42.0 • •
FBK04F24H 24 14.0—27.6 92 2.21 7500 0.19 6.7 6.60 64.7 33.0 • •
FBK04F24U 24 14.0—27.6 100 2.40 9500 0.26 9.2 12.00 117.7 42.0 • •
FBA06A FBA06A12L1A 12 7.0—13.8 110 1.32 3200 0.40 14.1 3.10 30.4 24.0 • • •
60mm FBA06A12M1A 12 7.0—13.8 130 1.56 3700 0.47 16.6 3.95 38.7 28.0 • • •
DC axial fans FBA06A12H1A 12 7.0—13.8 170 2.04 4200 0.54 19.1 5.20 51.0 32.0 • • •
FBA06A12U1A 12 7.0—13.8 210 2.52 4550 0.58 20.5 6.0 58.0 37.0 • • •
FBA06A24L1A 24 14.0—27.6 70 1.68 3200 0.40 14.1 3.10 30.4 24.0 • • •
FBA06A24M1A 24 14.0—27.6 90 2.16 3700 0.47 16.6 3.95 38.7 28.0 • • •
FBA06A24H1A 24 14.0—27.6 105 2.52 4200 0.54 19.1 5.20 51.0 32.0 • • •
FBA06T FBA06T12L 12 7.0—13.8 88 1.06 3200 0.34 12.0 2.80 27.5 24.0 • • •
60mm FBA06T12H 12 7.0—13.8 145 1.74 4200 0.47 16.6 4.75 46.6 32.0 • • •
Thin FBA06T24L 24 14—27.6 56 1.34 3200 0.34 12.0 2.80 27.5 24.0 • • •
FBA06T24H 24 14—27.6 83 1.99 4200 0.47 16.6 4.75 46.6 32.0 • • •
FBA08A FBA08A12L1A 12 7.0—13.8 68 0.82 1900 0.68 24.0 1.57 15.4 21.0 • • •
80mm FBA08A12M1A 12 7.0—13.8 124 1.49 2450 0.91 32.1 2.51 24.6 28.0 • • •
DC axial fans FBA08A12H1A 12 7.0—13.8 173 2.08 2950 1.12 39.6 3.78 37.1 32.0 • • •
FBA08A12U1A 12 7.0—13.8 270 3.24 3450 1.33 46.9 4.80 47.0 38.2 • • •
FBA08A24L1A 24 14—27.6 54 1.30 1900 0.68 24.0 1.57 15.4 21.0 • • •
FBA08A24M1A 24 14—27.6 71 1.70 2450 0.91 32.1 2.51 24.6 28.0 • • •
FBA08A24H1A 24 14—27.6 105 2.52 2950 1.12 39.6 3.78 37.1 32.0 • • •
FBA08T FBA08T12L 12 7.0—13.8 79 0.95 2000 0.62 21.9 1.55 15.2 23.0 • • •
80mm FBA08T12H 12 7.0—13.8 200 2.40 3100 0.95 33.5 3.20 31.4 34.0 • • •
Thin FBA08T24L 24 14—27.6 47 1.13 2000 0.62 21.9 1.55 15.2 23.0 • • •
FBA08T24H 24 14—27.6 110 2.64 3100 0.95 33.5 3.20 31.4 34.0 • • •
FBA09A FBA09A12L1A 12 7.0—13.8 110 1.32 2100 1.21 42.7 2.30 22.6 27.0 • • •
90mm FBA09A12M1A 12 7.0—13.8 150 1.80 2450 1.36 48.0 3.00 29.4 30.0 • • •
DC axial fans FBA09A12H1A 12 7.0—13.8 225 2.70 2850 1.61 56.8 3.98 39.0 35.0 • • •
FBA09A12U1A 12 7.0—13.8 430 5.16 3450 1.95 68.8 5.0 49.0 43.0 • • •
FBA09A24L1A 24 14—27.6 80 1.92 2100 1.21 42.7 2.30 22.6 27.0 • • •
FBA09A24M1A 24 14—27.6 110 2.64 2450 1.36 48.0 3.00 29.4 30.0 • • •
FBA09A24H1A 24 14—27.6 140 3.36 2850 1.61 56.8 3.98 39.0 35.0 • • •
FBA12G FBA12G12L1A 12 7.0—13.8 180 2.16 1700 1.95 68.9 3.30 32.4 30.0 • • •
120mm FBA12G12M1A 12 7.0—13.8 340 4.08 2100 2.45 86.5 4.80 47.1 35.5 • • •
DC axial fans FBA12G12H1A 12 7.0—13.8 460 5.52 2500 2.94 103.8 6.80 66.7 41.5 • • •
FBA12G12U1A 12 7.0—13.8 510 6.12 2750 3.25 114.7 8.0 38.0 45.5 • • •
FBA12G24L1A 24 14—27.6 110 2.64 1700 1.95 68.9 3.30 32.4 30.0 • • •
FBA12G24M1A 24 14—27.6 160 3.84 2100 2.45 86.5 4.80 47.1 35.5 • • •
FBA12G24H1A 24 14—27.6 230 5.52 2500 2.94 103.8 6.80 66.7 41.5 • • •
Locked
Rotor
Alarm
Sensor
DC AXIAL FANS
28
Type Model Rated Operating Rated Rated Nominal Maximum Maximum Noise Safety
and Size Voltage Voltage Current Input Speed Air Flow Air Pressure (dB-A) Standard
(V) (V) (mA) (W) (r/min) (m3/min) (CFM) (mmh20) (Pa) UL CSA
FCB34 FCB34AA12 12 10.2—13.8 165 1.98 2800 0.32 11.3 1.30 12.7 38.0 •
Crossflo Fans FCB34AB12 12 10.2—13.8 340 4.08 3300 0.61 21.5 3.00 29.4 42.0 •
FCB34AC12 12 10.2—13.8 375 4.50 3100 0.80 28.2 2.00 19.6 42.0 •
FCB34AD12 12 10.2—13.8 415 4.98 3000 0.96 33.9 1.90 18.6 42.0 •
FCB34AE12 12 10.2—13.8 430 5.16 2900 1.14 40.3 1.90 18.6 42.0 •
FCB34AF12 12 10.2—13.8 440 5.28 2800 1.22 43.1 1.85 18.1 42.0 •
FCB34AA24 24 20.4—27.6 110 2.64 2800 0.33 11.7 1.50 14.7 39.0 •
FCB34AB24 24 20.4—27.6 165 3.96 3300 0.64 22.6 2.40 23.5 42.0 •
FCB34AC24 24 20.4—27.6 200 4.80 3100 0.80 28.2 2.00 19.6 42.0 •
FCB34AD24 24 20.4—27.6 210 5.04 3000 0.95 33.5 2.00 19.6 42.0 •
FCB34AE24 24 20.4—27.6 230 5.52 2900 1.10 38.8 2.10 20.6 42.0 •
FCB34AF24 24 20.4—27.6 250 6.00 2800 1.15 40.6 2.20 21.6 42.0 • • •
FAL3F FAL3F05LH 5 4.5—6.0 205 1.64 4400 0.112 3.95 8.1 79.4 28.5 • • •
Blowers FAL3F05LL 5 4.5—6.0 380 1.90 5400 0.140 4.94 15.4 151 36.0 • • •
FAL3F12LL 24 7.0—13.8 111 1.33 4400 0.112 3.95 8.4 79.4 28.5 • • •
FAL3F12LH 12 7.0—13.8 185 2.22 5200 0.138 4.87 15.0 151 35.0 • • •
FAL3F24LH 24 14.0—27.6 105 2.52 5200 0.138 4.87 15.0 151 35.0 • • •
FAL5F FAL5F12LH 12 7.0—13.8 200 2.40 2900 0.30 10.6 10.00 98.07 36.0 • • •
FAL5F24LH 24 14—27.6 100 2.40 2900 0.30 10.6 9.70 95.12 36.0 • • •
FAL5F12LL 12 7.0—13.8 140 1.68 2400 0.25 8.83 6.20 60.8 30.0 • • •
FAL5F24LL 24 14—27.6 70 1.68 2400 0.25 8.83 6.30 61.8 30.0 • • •
FAL6F FAL6F12LL 12 7.0—13.8 280 3.36 2100 0.53 18.7 11.25 110.3 40.0 • • •
FAL6F12LH 12 7.0—13.8 500 6.00 2550 0.65 23.0 18.00 176.5 45.0 • • •
FAL6F24LL 24 14—27.0 155 3.72 2100 0.53 18.7 11.50 112.8 40.0 • • •
FAL6F24LH 24 14—27.0 295 7.08 2550 0.67 23.7 19.70 193.2 45.0 • • •
Locked
Rotor
Alarm
Sensor
CROSSFLO BLOWERS
29
