First Edition LCD Module Technical Specification Dee 17, 2007 Final Revision KRKKKKEK rene 1T-55311D090J-FW-A-ABN OPTREX CORPORATION Approved: Shigeo Suzuki QUALITY ASSURANCE DIVISION Checked: oshtyuki Okamoto DESIGN 2T Prepared: Ryuya Abe DESIGN 2T APPROVED By Signature : Date : Please return this specification within two month with your signature. If not returned within two month, specification will be considered as having been accepted. T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 1/37CONTENTS Item Page CONTENTS APPLICATION OVERVIEW ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS INTERFACE PIN CONNECTION INTERFACE TIMING 10 BLOCK DIAGRAM 15 MECHANICAL SPECIFICATION 16 OPTICAL CHARACTERISTICS 18 10 RELIABILITY TEST CONDITION 21 11 INSPECTION STANDARDS 22 12 OTHER FEATURE 23 13 HANDLING PRECAUTIONS FOR TFT-LCD MODULE 24 PACKAGING SPECIFICASION 27 PRODUCTS NUMBER LABELING FORMS 30 LAMP UNIT for 9.0 WVGA 31 Revision History Rev. Date Page Comment T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 2/371. APPLICATION This specification applies to color TFT-LCD module, T-55311DO90J-FW-A-ABN. These specification papers are the proprietary product of OPTREX and include materials protected under copyright of OPTREX. No part of this document may be reproduced in any form or by any means without the express written permission of OPTREX. OPTREX does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a product specified in this document. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of OPTREX or of others. OPTREX classifies the usage of the TFT-LCD module as follows. Please confirm the usage before using the product. (1) Standard Usage Computers, office equipment, factory automation equipment, test and measurement equipment, communications, transportation equipment(automobiles, ships, trains, etc.), provided, however, that operation is not influenced by TFT-LCD directly. (2) Special Usage Medical equipment, safety equipment, transportation equipment, provided, however, that TFT-LCD is necessary to its operation. (3) Specific Usage Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control systems, life support systems and any other equipment. OPTREX should make a contract that stipulate apportionment of responsibilities between OPTREX and our customer. The product specified in this document is designed for Standard Usage unless otherwise specified in this document. If customers intend to use the product for applications other than those specified for Standard Usage, they should first contact OPTREX sales representative for it's intended use in writing. OPTREX has been making continuous effort to improve the reliability of its products. Customers should implement sufficient reliability design of their application equipments such as redundant system design, fail-safe functions, anti-failure features. OPTREX assumes no responsibility for any damage resulting from the use of the product that does not comply with the instructions and the precautions specified in this document. Please contact and consult a OPTREX sales representative for any questions regarding this product. T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 3/372. OVERVIEW T-55311D0O90J-FW-A-ABN is 9.0 color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs, control circuit, and backlight unit. By applying 6 bit or 8 bit digital data, 800 x 480, 262k-color or 16.7M-color images are displayed on the 9.0 diagonal screen. Input power voltage is 3.3V for LCD driving. The type of data and control signals are digital and transmitted via LVDS interface per Typ. 30.4 MHz clock cycle. Inverter for backlight is not included in this module. General specifications are summarized in the following table: ITEM SPECIFICATION Dy om Ree EOE Number of Dots 800 x 3 (H) x 480 (V) Pixel Pitch (mm) 0.246 (H) x 0.246 (V) Color Pixel Arrangement RGB vertical stripe Display Mode Normally white TN Number of Color 262k(6 bit/color), 16.7M(8 bit/color) Luminance (cd/m?) 600 Wide Viewing Angle Technology Optical Compensation Film Viewing Angle (CR = 10) -80~80(H), 60~80(V) Surface Treatment Anti-glare and hard-coating 3H Electrical Interface LVDS 6 bit/8 bit) Optimum Viewing Angle(Contrast ratio) 6 o'clock Module Size (mm) 219.0 (W) x 136.2 (A) x 13.2 (D) Module Mass (g) 480 Backlight Unit CCFL, 2-tubes, edge-light, replaceable Characteristic value without any note is typical value. T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 4/373. ABSOLUTE MAXIMUM RATINGS ITEM SYMBOL MIN. MAX UNIT Power Supply Voltage for LCD VCC 0 4.0 Vv Logic Input Voltage VI -0.3 VCC+0.3 V Lamp Voltage VL 0 2000 Vrms Lamp Current IL 0 15 mArms Lamp Frequency FL - 80 kHz Operation Temperature(Panel) Note 1,2) Top(Panel) -20 70 C Operation Temperature(Ambient) ete 2 Top(Ambient) ~20 70 C Storage Temperature Note 2) Tste 20 80 C [Notel 1) Measured at the center of active area and at the center of panel back surface 2) Top, Tstg < 40C : 90%RH max. without condensation Top, Tstg > 40C : Absolute humidity shall be less than the value of 90%RH at 40C without condensation. 4. ELECTRICAL CHARACTERISTICS (1) TFT-LCD Ambient temperature: Ta = 25C ITEM SYMBOL | MIN. | TYP. MAX. UNIT Remarks Power Supply Voltages for LCD VCC 3.0 3.3 3.6 Vv *1) Power Supply Currents for LCD ICC -- 370 500 mA *2) Permissive Input Ripple Voltage VRP 7 7 100 mVp-p | VCC =+43.3V High VIH 2,0 VCC+0.3 Vv MODE, SC Logic Input Voltage Low VIL 0 - 0.8 V MODE, SC *1) Power and signals sequence: tl<10ms 200 ms < t4 0<t2<50 ms 200 ms < t5 0<t8<50ms O<t6 VCC LCD Power Supply Logic Signal Backlight Power Supply a fa 5 t6 data: RGB DATA, DCLK, DENA, MODE, SC T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 5/37VCC-dip conditions: 1) When 2.6 V < VCC < 3.0 V, td< 10 ms 2) When VCC < 2.6 V VCC-dip conditions should also follow the power and signals sequence. | Vcc rr, ; =f >] 8 ; ef) ; 4 8 td | | *2) Typical current condition: 64-gray-bar pattern(6 bit) 256-gray-bar pattern(8 bit) 480 line mode VCC = 43.3 V , fa=31.6 kHz, fv=60 Hz, foLk=30.4 MHz (2) Backlight Ta = 25C ITEM SYMBOL| MIN. TYP. MAX. UNIT Remarks Lamp Voltage VL A450 Vrms IL= 12.0 mArms Lamp Current IL 6.0 12.0 14.0 |mArms *2) *6) Lamp Frequency FL 35 80 kHz *3) 800 Ta = 25C Starting Lamp Voltage VS 970 Vrms Ta =0C 1020 Ta =-20C *&A) _ Lamp Life Time LT 50000 np |*,*5), IL = 12.0 mArms Continuous operation [Note] *1) Please use synchronous inverter. *2) Lamp Current measurement method (The current meter is inserted in low voltage line.) CTH LCD CTH Module CTL [+] Inverter A _ Power | Supply *3) Lamp frequency of inverter may produce interference with horizontal synchronous frequency, and this may cause horizontal beat on the display. Therefore, please adjust lamp frequency, and keep inverter as far from module as possible or use electronic shielding between inverter and module to avoid the interference. *A) Lamp life time is defined as the time either when the brightness becomes 50% of the initial value, or when the starting lamp voltage does not meet the value specified in this table. T-5531 1DO90J-FVW-A-ABN (AB) OPTREX CORPORATION Page 6/37*5) The life time of the backlight depends on the ambient temperature. The life time will decrease under low/high temperature. *G6) Please use the inverter which has symmetrical current wave form as follows, The degree of unbalance: less than 10% The ratio of wave height: less than \/2+10% Tou Ipy' High side peak The degree of unbalance = | Ip, - Ipy,| /Irms x 100(%) The ratio of wave height = Tpy(or ie) /Irms i Tp Ip, Low side peak CURRENT WAVE FORM T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 7/375. INTERFACE PIN CONNECTION (1) CN 1(nterface Signal) Used connector: FI-SE20P-HFE (JAE) Corresponding connector: FI-S20S[for discrete Wirel, FI-SE20MEl|for FPC] (AE) Pin Symbol Function (ISP 6 bit compatibility mode) Function (ISP 8 bit No. 6 bit input | 8 bit input compatibility mode) 1 VCC +3.3 V Power supply < 2 VCC +3.3 V Power supply < 3 GND GND < 4 GND GND < 5 | Link 0O-| RO, R1, R2, R38, R4, R5, GO | R2, R38, R4, R5, R6, R7, G2 | RO, R1, R2, R3, R4, R5, GO 6 | Link 0+] RO, R1, R2, R38, R4, R5, GO | R2, R38, R4, R5, R6, R7, G2 | RO, R1, R2, R38, R4, R5, GO 7 GND GND < 8 | Link 1-] G1, G2, G8, G4, G5, BO, B1 | G3, G4, G5, G6, G7, B2, B3B | G1, G2, G8, G4, G5, BO, B1 9 |Link 1+] G1, G2, G8, G4, G5, BO, B1 | G8, G4, G5, G6, G7, B2, BB | G1, G2, G8, G4, G5, BO, B1 10 GND GND < 11 | Link 2-| B2, B3, B4, B5, DENA B4, B5, B6, B7, DENA B2, B38, B4, B5, DENA 12 | Link 2+] B2, B38, B4, B5, DENA B4, B5, B6, B7, DENA B2, B8, B4, B5, DENA 13 GND GND < 14 |CLKIN- Clock < 15 |CLKIN+ Clock + < 16 GND GND < 17 | Link3- | See: *2) RO, R1, GO, G1, BO, B1 R6, R7, G6, G7, B6, B7 18 | Link3+ | See: *2) RO, R1, GO, G1, BO, B1 R6, R7, G6, G7, B6, B7 19 | MODE Low=ISP_ 6 bit compatibility mode B Lit compatibility mode 20 SC Scan direction control (Low=Normal, High=Reverse) a *1) The shielding case is connected with GND. *2) Recommended wiring of Pin 17,18 (6 bit input) vec tranemitter 680 Q LOW data Pin 17 Pin 17 | 0000 Pin 18 or Pin 18 6200 (2) CN 2(Backlight) Backlight-side connector: BHR-04VS-1 (GST) Inverter-side connector: SM02(4.0)B-BHS(LF)\(SN) (JST) Pin No. Symbol Function 1,2 CTH VBLH (High Voltage) 4A CTL VBLL (Low Voltage) [Note] VBLH-VBLL = VL T-55311DO90J-FW-A-ABN (AB) OPTREX CORPORATION Page 8/37a. ISP 6 bit compatibility mode bit input) (3) ISP data mapping >< >< >< >< >< >< >< >< seventies ees >< >< , eT >< >< >< peste >< g 5 5 3 s 3 g 3 < >< >< =< >< >< >< >< Z 8 s 3 3 8 z Z < >< >< < < os >< >< 3 8 z x 8 8 g 2 < >< >< =< >< S< >< >< 2 z 2 3 8 5 5 2 < >< < =< >< S< S< >< 2 3 2 5 g x =< >< >< =< >< S< >< >< 2 g 5 a Z 2 ~< os< >< >< >< >< o< >< s| lal |Z s| jel |Z s once vie >< >< Ln We >< >< >< ee Wi EO A * ceeeeeees >< oe a 5 *) seeveeees < a >< < 2 * seeaveees >< 5 4 4 4 a D 4 4 4 4 = 5 4 Page 9/37 OPTREX CORPORATION (AB) X Xx Xx Bl x BO Xx G5 Xx G4 Xx G3 Xx G2 Xx Gl Xx X X Xx Xx DENA Xx Xx Xx B5 Xx B4 Xx B3 Xx B2 Xx X X Xx Xx Xx B7 X B6 Xx G7 x G6 Xx R7 Xx R6 Xx X T-55311DO90J-FW-A-ABN Link2+/- Link3+/- Link1+/-6. INTERFACE TIMING LVDS transmitter input signal (1) Timing Specifications ITEM SYMBOL MIN TYP MAX UNIT DCLK Frequency foLk -- 30.4 A5 MHz Period tcLK 22.2 32.9 -- ns Active Time tHA 800 800 800 tcLK Blanking Time tHE 20 160 a toLK Horizontal Frequency fu -- 31.6 A5 kHz Period tH 22.2 31.7 7 Ls DENA Active Time tva 480 480 480 tH Blanking Time tvB 3 45 7 tH Vertical Frequency fy 55 60 75 Hz Period tv 13.3 16.7 18.2 ms [Note] 1) DENA (Data Enable) should always be positive polarity as shown in the timing specification. 2) DCLK should appear during all invalid period. 3) LVDS timing follows the timing specifications of LVDS receiver IC: THC63LVDF84B(Thine). 4) In case of blanking time fluctuation, please satisfy following condition. tvBn > tvBn-1 3(tH) T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 10/37(2) Timing Chart a. Horizontal Timing Chart FU UU |_- Last Data RGR Invalid Data 1 2 Y 3 a ! \ X 700 ! 800 Invalid Data X tus tHa _ DENA b. Vertical Timing Chart LINE DATA tve A tu=1/fu A Invalid Data DENA | tv=1/fyv Vv a T-55311DO90J-FW-A-ABN OPTREX CORPORATION Page 11/37 Vv(3) Color Data Assignment a. 6 bit input INPUT DATA R DATA G DATA B DATA COLOR R5:R4:R38:R2: R1: RO| G5: G4: G3 :G2:G1:G0] BS: B4: B38: B2: Bl: Bo & wn lve) LSB |MSB LSB |MSB oO oO a wm ee) BLACK RED(3) GREEN(3) BLUE(@63) CYAN MAGENTA YELLOW WHITE RED() RED(2) Oo So Ci CO] ei Rei Rt OPO: O:ire:io Ci CO] Ri riridi Gi Oirica Ci OCP riririai ci cirico Di PCP RirPirer Oi GO: Cirio mi OO] Rei ei et Oi Ci Ci ei oO Diep RieRi Rei O!co! cir CEO] Ri Ri Ci ei Oieio Ci Oy] Riri Cire: Oriei co:io Or CO] Rie: O:Re:i OR: O:0O DEOP REPRE OPH OPR:ico:io CPi OP Ri RPiciRi ciricio Oi GPR FP: Oi RI OF: co Cr Ol rR: Ce: Riri OG: o Ci OP rRi CieieiReicicoico Ci OP ri Oirireiric: do: co Ci OP rRi CiereieiRei coc: c:io Ci OP rRi CREM: Ri OO: oc Ci CP rRi CieieiRreicicoio RED(2) RED(3) GREEN(1) GREEN(2) GREEN(2) GREEN(63) BLUE() BLUE(2) BLUE@2) BLUE@3) [Note] 1) Definition of gray scale Color (n) ---n indicates gray scale level. Higher n means brighter level. 2) Data 1:High, 0: Low T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 12/37b. 8 bit input INPUT DATA R DATA G DATA B DATA R7 [R6EIR5/R4:R3!R2R1! RO | G7 !1G6!G5:G4'G3'G2'G1! GO | B7 :B6!B5!B4!B3!B2!B1: BO LSB|MSB LSB|MSB LSB COLOR = wa & BLACK RED(@55) GREEN(255) BLUE(255) CYAN MAGENTA YELLOW WHITE REDQ) RED() i) Oo oS oS CiPGMTRe iP iP i@Diaqdidirica CiPG@TR iP iP iDicdidiria CiPGM@TRiPiPidicdidiria ODiPMyeiPRirPidiadicdiria SCityriPifPicdigdicirica CiPGMTRe iP iP i@Diaqdidirica SPR PReiRBERECI i Ciairica iP ype iPiRPi@giagicdgir COiMdyeiPidirFPiogirFica COriMOypreiPiDdirFPidirFiadia DiPMyrReiPicPtirPidiriadioa Dim] ReiPictdirPidirPiadioa SiPMye iP iDiPidirPiadisecrd OiPMyeiRPiDiPidirPid:iad OprOyreiPidirFiodirFPiadioqg ODiPMPReiPi@DiPidiria SiP@M@TReidirFPtirPiFPiaia Ti@MReiDdirYyPiyPiFPiadiaqgic Ci @IReiDMixyeiXPiPiiaqic CiGMi Re i Dim ima ie tft Oiadia DTi@M@ReidirYPrirPibiadiaqgico DTiP@M@ReiDdiYPirPeiFPiaiaqgic Di@dIRPidirPiPiPiadidiad Ci@G@lRPi@diPtikPiPid:i@d:ia RED(@55) GREEN() GREEN() GREEN(255) BLUEQ) BLUEQ@) BLUE(@55) 0:0:0:0:0:0:0: 0] 0:0 [Note] 1) Definition of gray scale Color (n) ---n indicates gray scale level. Higher n means brighter level. 2) Data 1:High, 0: Low T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 13/37(4) Display Position and Scan Direction D(X, Y) shows the data number of input signal for LCD panel signal processing PCB. SC: Low ba, => D(800,1) ke wee DU,480) 5 D(800, 480) CN2 SC: High D(800,1) + <. DG, ) CN2 T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 14/377. BLOCK DIAGRAM CN1 Timing signal Display data Timing CE control st > ontrover G2 TFT-LCD Drivers(gate) Power => G480 ofet ott Power Suppl > eit Drivers(source) Circuit I/F Connector $2399 CCFL T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 15/378. MECHANICAL SPECIFICATIONS (1) Front Side noted. SECTION B-B (sor) unless 13.2 O.5mm projection EG CONINSdO TAZSE> 202) (sz-2) (VSHV SATLOV) B0SI1 cl y Fe _ _ a _ _ a * r ] : ay ac | | Cc wu | oO oe oc FE | | os _O | | lo Ml Oo mw Cr ~ KR SY a _ | O | LI Ola Ht Zz) et = & ! iL iu hI Z| co mm | | | = | oO} w | NJ > ! I} oO) d WyE] | - - - - = d IN] ON Lu} <t mM) ~ | | | leo | | i "| O| OO] ~~ | | | | LO O) | O | | | | | | geo L = == = J | [ o_~ A 00 1 Bo oo ZI oO (1'89) i NY tot Cc jee Z 981 2fea U < s Ki at E6 0 8| ss PSS 6 = (s9r) S* OV ol S LSSSssE ~a <x + a VEZ 9 (| " " _ _ _ = y =e za Si OW e an tL << aS (Unit: mm) T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 16/37(2) Rear Side UuUolLosfoOud e|saue pululc!] perou ssalun wug'or s! eauevelolL(| Sl I vauy TaaviX CLSPIL-SAPO-dHE? ZNO CAVE J SAH-dOeSS- [a2 INO (ri) BS vo vod (Unit:mm) Page 17/37 OPTREX CORPORATION (AB) T-55311DO90J-FW-A-ABN9. OPTICAL CHARACTERISTICS Ta=25C, VCC=3.3V, Input Signals: Typ. Values shown in Section 6 ITEM SYMBOL |CONDITION| MIN TYP MAX | UNIT |Remarks Contrast Ratio CR Ov=0, OH=0 390 600 *1)*2)*5) Luminance Lw Ov=0, OH=0 450 600 ed/m2 | *1)*5) Luminance Uniformity ALw Ov=0, 8H=0 30 % |*1)*3)*5) . tr Ov=0, 0H=0 4 ms_ |*1)*4)*5) Response Time tf Ov=0, OH=0 12 ms_ |*1)*4)*5) Horizontal ) -70~70 | 80~80 *1)*5 orizonta H CRS 10 y*5) Viewing Vertical Ov -50~70 | 60~80 *1)*5) Angle Horizontal OH OR>S ~70~70 | 80~80 *1)*5) Vertical Oy - ~70~70 | -80~80 *1)*5) Image sticking tis 2h 2 8 *6) Rx 0.543 0.573 0.603 Red Ry 0.299 0.329 0.359 Color Gx 0.298 0.328 0.358 Green *7)* Coordinates Gy 8v=0, OH=0 | 0.506 0.536 0.566 1)*5) Bx 0.131 0.161 0.191 Blue By 0.127 0.157 0.187 W 0.283 0.318 0.348 White * Wy 0.299 0.329 0.359 [Note] These items are measured using CS1000(MINOLTA) for color coordinates, EZContrast(#LDIM) for viewing angle and CS1000 or BM-5A(TOPCON) for others under the dark room condition (no ambient light) after more than 30 minutes from turning on the lamp unless noted. Condition: IL = 12.0 mArms, FL= 50 kHz Measurement method for luminance and color coordinates is as follows. Photodetector Luminance : 8@=2 (BM-5A) 6 (Fiel Piel) Color coordinates :@=1 (CS1000) a ae 500 mm TFT-LCD module | The luminance is measured according to FLAT PANEL DISPLAY MEASUREMENTS STANDARD (VESA Standard). T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 18/37*1) Measurement Point Contrast Ratio, Luminance, Response Time, Viewing Angle, Color Coordinates: Display Center Luminance Uniformity: point 1~5 shown in a figure below (1,1) 200 400 600 1 2 120 2 O 5 240 ad 3 4 360 D (800,480) *2) Definition of Contrast Ratio CR= Luminance with all white pixels / Luminance with all black pixels *3) Definition of Luminance Uniformity ALw=[Lw(MAX)/Lw(MIN)-1] x 100 *4) Definition of Response Time White Luminance 10% Black 10% *5) Definition of Viewing Angle (Ov, 0H) Normal Axis jet @D / \ N XN XN XN NX nn --\.----------" yet NAT. Right LCD panel Lower(-) T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 19/37*6) Image sticking: Continuously display the test pattern shown in the figure below for two-hours. Then display a completely white screen. The previous image shall not persist more than two seconds at 25C. A Black Lines TEST PATTERN FOR IMAGE STICKING TEST T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 20/3710. RELIABILITY TEST CONDITION (1) Temperature and Humidity ITEM CONDITIONS HIGH TEMPERATURE 40C, 90%RH, 240 h HIGH HUMIDITY OPERATION (No condensation) HIGH TEMPERATURE OPERATION 70C, 240 h LOW TEMPERATURE OPERATION -20C, 240 h HIGH TEMPERATURE STORAGE 80C, 240 h LOW TEMPERATURE STORAGE -20C, 240 h BETWEEN -20C (1h) and 80C (1h), THERMAL SHOCK (NON-OPERATION) 100 CYCLES (2) Shock & Vibration ITEM CONDITIONS Shock level: 1470 m/s? 50G) SHOCK Waveform: half sinusoidal wave, 2 ms (NON-OPERATION) | Number of shocks: one shock input in each direction of three mutually perpendicular axes for a total of six shock inputs Vibration level: 9.8 m/s? (1.0G) Waveform: sinusoidal VIBRATION Frequency range: 5 to 500 Hz (NON-OPERATION) Frequency sweep rate: 0.5 octave /min Duration: one sweep from 5 to 500 Hz in each of three mutually perpendicular axis(each x,y,z axis: 1 hour, total 3 hours) (3) Judgment standard The judgment of the above tests should be made as follow: Pass: Normal display image, no damage of the display function. (ex. no line defect) Partial transformation of the module parts should be ignored. Fail: No display image, damage of the display function. (ex. line defect) T-55311D090J-FW-A-ABN (AB) OPTREX CORPORATION Page 21/37