4.7 X 4.1 X 1.2 mm INDUSTRIAL GRADE CERAMIC RESONATOR RoHS/RoHS II Compliant AWSZT-MWD Pb in ceramic, exemption (7c-I) APPLICATION: FEATURES: * Remote controls, Microprocessor clocks, Mobile phones, DVD & CD-Roms, Electric appliances * Consumer electronics * Low resonant impedance * IR reflow capable * Low cost ELECTRICAL SPECIFICATIONS: Parameters Frequency Range Resonant Impedance (Ro) Minimum 6.00 Typical Maximum 13.00 30 Units MHz Load Capacitance (C1=C2, for test circuit) 24 30 36 pF Frequency Tolerance @25 C Frequency Stability (-25C to +85C) -0.5 -0.4 +0.5 +0.4 % % V +6 15 V Vp-p. Withstanding Voltage (1) D.C.Voltage Rating Voltage (2) A.C. Voltage Insulation Resistance Operation Temperature Storage Temperature Aging Rate (Fosc) (10 years) 50 100 -25 -55 +85 +85 +0.3 -0.3 M C C % Notes DC , 1 min 10V, 1min OPTIONS AND PART IDENTIFICATION: AWSZT - MWD Frequency Frequency in MHz Packaging T: 1000pcs/Reel TEST CONDITIONS AND TEST CIRCUIT Parts shall be measured under a condition (Temp.: 2015C, Humidity: 6520% R.H.) unless the standard condition (Temp: 253C, Humidity: 655% R.H.) is regulated to test. X: Ceramic Resonator C1=C2: 30pF 20% ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.09.13 4.7 X 4.1 X 1.2 mm INDUSTRIAL GRADE CERAMIC RESONATOR RoHS/RoHS II Compliant AWSZT-MWD Pb in ceramic, exemption (7c-I) OUTLINE DIMENSION: 4.1 0.2 Recommended Land Pattern 8.00* 3.9 0.2 5.1 0.2 0.8 0.2 0.8 0.2 3.9 0.2 (1.2 + A) 1.5 0.2 0.2** 0.8 0.2 4.7 0.2 0.8 0.2 INPUT OUTPUT *:EIAJ MONTHLY CODE Dimension: mm ** `A' stands for the thickness of the ceramic element, which varies with the frequency SUGGESTED REFLOW PROFILE Peak:260 max 10s max 250 230 150 P r e - h e a tin g 100 30s min ABRACON IS ISO9001:2008 CE RTIFIED within within 80-120s. 20-40s Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.09.13 4.7 X 4.1 X 1.2 mm INDUSTRIAL GRADE CERAMIC RESONATOR RoHS/RoHS II Compliant AWSZT-MWD Pb in ceramic, exemption (7c-I) TAPE & REEL: Packaging: T: 1000pcs/Reel T op T ape P e e li n g S tr e n g th 20-70g 10 max C a r r ie r T a p e A B W T 1803 60 min. 12.4 min 19.4 max Pieces per reel 1000 typ. Carrier tape size 12 Dimensions: mm Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the product will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according to MSL 1 requirements to maintain solderability. CAUTION (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) This component is not hermetically sealed. Do not clean or wash the component. (3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. (4) Do not expose the component to open flame. (5) This specification applies to the functionality of the component as a single unit. (6) Storage Conditions: If the product is to be stored for a period greater than 1 year after the Delivery Date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. (7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other highreliability , life dependant applications. ContactAbracon Corporation prior to using this product when in doubt. ATTENTION: Abracon Corporation's products are COTS - Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon's products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.09.13