TEN 40-4812WIN - TRACO Power

http://www.tracopower.com

DC/DC Converters

TEN 40WIN Series, 40 Watt

Features

◆ Highest power density:

40 W in 1” x 2” x 0.4” package

◆ Ultra wide 4:1 input range

◆ Excellent efﬁciency up to 90 %

◆ Output voltage adjustable

◆ Remote On/Off

◆ Protection against short circuit

and over voltage

◆ I/O isolation 1500 VDC

◆ Operating temperature range

–40°C to +75°C

◆ 3-year product warranty The TEN 40WIN Series is a new range of isolated high performance DC/DC-con-

verter modules. Due to the very high efﬁciency of up to 90% these 40 W converters

come with a footprint of only 1.0” x 2.0”. The 12 models have an ultra wide 4:1

input voltage range and a tight output voltage regulation. The output voltage is ad-

justable by external resistor. Remote On/Off and protection against overpower and

over voltage are standard features of these converters.

Typical applications are in mobile equipment, instrumentation, distributed power

architectures in communication and industrial electronics and everywhere where

space on the PCB is limited.

Order code Input voltage range Output voltage Output current max. Efﬁciency

TEN 40-2410WIN 3.3 VDC 8‘000 mA 89 %

TEN 40-2411WIN 5.0 VDC 8’000 mA 90 %

TEN 40-2412WIN 9 – 36 VDC 12 VDC 3‘330 mA 89 %

TEN 40-2413WIN (nominal 24 VDC) 15 VDC 2‘670 mA 89 %

TEN 40-2415WIN 24 VDC 1‘670 mA 91 %

TEN 40-2422WIN ±12 VDC ±1’670 mA 88 %

TEN 40-2423WIN ±15 VDC ±1‘330 mA 88 %

TEN 40-4810WIN 3.3 VDC 8‘000 mA 89 %

TEN 40-4811WIN 5.0 VDC 8’000 mA 90 %

TEN 40-4812WIN 18 – 75 VDC 12 VDC 3‘330 mA 90 %

TEN 40-4813WIN (nominal 48 VDC) 15 VDC 2‘670 mA 90 %

TEN 40-4815WIN 24 VDC 1‘670 mA 89 %

TEN 40-4822WIN ±12 VDC ±1’670 mA 88 %

TEN 40-4823WIN ±15 VDC ±1‘330 mA 88 %

Models

Page 1 of 4

C B

Scheme

http://www.tracopower.com

DC/DC Converters

TEN 40WIN Series 40 Watt

Input Specifications

Input current at no load 24 Vin; 3.3 & 5.0 VDC models: 90 mA typ.

(nominal input voltage) 24 Vin; 12 VDC models: 95 mA typ.

24 Vin; 15 & 24 VDC models: 105 mA typ. / 115 mA typ.

24 Vin; dual output models: 65 mA typ.

48 Vin; 3.3 & 5.0 VDC models: 55 mA typ.

48 Vin; 12 & 15 VDC models: 60 mA typ. / 65 mA typ.

48 Vin; 24 VDC models: 75 mA typ.

48 Vin; dual output models: 45 mA typ.

Surge voltage (100 msec. max.) 24 V models: 50 V max.

48 V models: 100 V max.

Reflected input ripple current 24 V models: 30 mA typ.

48 V models: 20 mA typ.

Conducted noise (input) EN 55022 level A, FCC part 15, level A with

external capacitor see: application note

Start-up voltage / under voltage shut down 24 V models: 9 VDC / 8.3 VDC (or lower)

48 V models: 18 VDC / 16.5 VDC (or lower)

Recommended input fuse (slow blow) 24 V models: 8000 mA

48 V models: 4000 mA

Output Specifications

Voltage set accuracy single output models: ±1.0 %

dual output models (balanced load): ±2.0 %

Output voltage adjustment range ±10 % with external resistor (see page 3)

Regulation – Input variation Vin min. to Vin max. ±0.5 % max.

– Load variation single output models (0 – 100%): ±0.5 % max.

dual output models (9 – 100%): ±1.0 % max.

Minimum load single output models: 0 %

dual output models: 9 % of rated max current

(operation at lower

load condition will not damage the converters.

However, they may not meet all listed specifications)

Temperature coefficient ±0.02 %/K

Ripple and noise (20 MHz Bandwidth) 3.3 & 5.0 VDC models: 100 mVpk-pk. typ.

with external capacitors 1 µF M/C 10 µF T/C other models: 150 mVpk-pk typ.

Transient response (25 % load step change) 250 µs typ.

Short circuit protection hiccup mode, indefinite (automatic recovery)

Over power protection at 150 %

Over voltage protection at 120 % of Vout nom. typ.

Capacitive load 3.3 VDC models: 21’000 µF max.

5.0 VDC models: 13’600 µF max.

12.0 VDC models: 2’400 µF max.

15.0 VDC models: 1’500 µF max.

24.0 VDC models: 600 µF max.

±12.0 VDC models: 1’200 µF max. (each output)

±15.0 VDC models: 750 µF max. (each output)

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Page 2 of 4

Application note: www.tracopower.com/overview/ten40win

http://www.tracopower.com

DC/DC Converters

TEN 40WIN Series 40 Watt

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Page 3 of 4

General Specifications

Temperature ranges – Operating (natural convection cooling 20 LFM) –40°C to +75°C (see load derating)

– Case temperature +105°C max.

– Storage –50°C to +125°C

Load derating – without heatsink 2.5 %/K above 55°C

– with heatsink 2.5 %/K above 65°C

Humidity (non condensing) 95 % rel H max.

Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) 330’000 h

Isolation voltage (60 sec.) – Input/Output 1500 VDC

Isolation capacitance – Input/Output 1500 pF typ

Isolation resistance – Input/Output >1000 Mohm

Switching frequency (fixed) 320 kHz typ. (pulse width modulation PWM)

Safety standards CAN/CSA-C22.2 No 60950-1-07 Incl. AM1 (2011)

ANSI/UL Std No 60950-1, 2nd Ed. Incl. AM1 (2011)

IEC 60950-1:2005 (2nd Edition); +A1:2009

– Certification documents www.tracopower.com/overview/ten40win

Remote On/Off – On: 4.7 to 12 VDC or open circuit.

– Off: 0 to +1.2 VDC or short circuit pin 3 and pin 2

– Off idle current: 2.5 mA max.

Physical Specifications

Casing material aluminum black anodized

Potting material epoxy (UL 94V-0 rated)

Weight 30 g (1.05 oz)

Soldering temperature max. 260°C / 10 sec.

Environmental compliance – Reach

www.tracopower.com/products/reach-declaration.pdf

– RoHS RoHS directive 2011/65/EU

Output Voltage Adjustment

Trim

+Vout

Trim

Vout

Trim up Trim down

Single output models only (open = nominal output voltage)

Ru [kOhm]*

output 3.3V 5V 12V 15V 24V

+5% 7.34 12.30 41.40 50.15 27.38

+10% 0.65 0.48 2.70 3.58 0.34

Rd [kOhm]*

output 3.3V 5V 12V 15V 24V

–5% 8.51 16.53 47.15 63.35 38.04

–10% 0.50 1.24 1.35 4.92 1.12

*approximate values

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

www.tracopower.com

DC/DC Converters

TEN 40WIN Series 40 Watt

Outline Dimensions

5.5

50.8

(2.0)

(0.22

)

Bottom View

45.72

(1.8)

2.54

(0.1)

7.62

(0.3)

17.78

(0.7)

10.16

(0.4)

20.32

(0.8)

25.4

(1.0)

2.54 (0.1)

2.54

(0.1)

Dimensions in [mm], () = Inch

Pin diameter: 1.0 ±0.05 (0.04 ±0.002)

Pin pitch tolerance: ±0.25 (±0.01)

Case tolerances: ±0.25 (±0.01)

Rev. February 27. 2018

Page 4 of 4

Pin Single Dual

1+Vin (Vcc) +Vin (Vcc)

2–Vin (GND) –Vin (GND)

3Remote On/Off

4+Vout +Vout

5–Vout Common

6Trim –Vout

Pin-Out

Note:

Before attaching the heatsink, the product label on

converter has to be removed for optimal performance.

For volume orders we can supply the converters with

heatsink already mounted.

Please contact us for a relative quotation.

Converter

Heat-sink

Thermal pad

Clamp

31.0 (1.22)

max.

31.1 (1.22)

Heat-sink (optional)

h= 11.0 (0.43) for 24 VDC output models

10.2 (0.40) for other models

Order code: TEN HS6 for 24 VDC output models

TEN-HS4 for other models

(cont.: heat-sink, thermal pad, 2 clamps)

Material: Aluminum

Finish: Anodic treatment (black)

Weight: 9 g (0.32oz) without converter

Thermal impedance after assembling: 10 K/W

H = 18.0 ( 0.71) for 24 VDC output model with TEN-HS6

H = 17.2 (0.68) for other models with TEN-HS4

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

TRACO Power:

TEN 40-4815WIN TEN 40-4812WIN TEN 40-2412WIN TEN 40-4810WIN TEN 40-2411WIN TEN 40-2410WIN

TEN 40-4823WIN TEN 40-4811WIN TEN 40-2422WIN TEN 40-4822WIN TEN 40-2413WIN TEN 40-4813WIN TEN

40-2415WIN TEN 40-2423WIN