5600/5700 Series Delay On Release Timers Fixed/Adjustable Timing, Relay Output Product Facts DC input delay on release timer offered in fixed (5600) and adjustable (5700) types Up to 10A loads Reverse polarity protection CMOS digital design Built to MIL-R-83726 environmentals Many customizing options Extended timing ranges Tighter timing tolerances Header and mounting Different Aux. voltages Different control line voltages Input either 115Vac, 60 Hz. or 400 Hz. CII 5600/6700 series delay on release timers combine solid state timing circuits with electromechanical output relays in robust hermetically sealed enclosures. The 5600 types are fixed timers, while the 5700 models are adjustable via an external resistor. Numerous output options include 2A, 5A and 10A rated contacts in 1, and 2 form C (SPDT and DPDT) arrangements. Electrical Specifications Timing Range: 5600 series (fixed): 50 ms to 600 s. 5700 series (adjustable): 50 ms to 240 s. Tolerance: 10% or 15ms, whichever is less Recycle Time: 10 ms . Reset Time: 20 ms . Operate Time (Max.) : 10 ms (2A and 5A models), 20ms (10A models). Input Voltage: 18 to 31Vdc. Control Voltage: 10 to 31Vdc. Ground common to aux. power line. 10Vdc minimum must be applied for a minimum duration of 20ms to energize output and initiate the timing circuit. Current Drain (at 25C, 28Vdc): Control Line: 15mA typ., 25mA max. Input Line De-energized (after completion of delay period): 125 mA. Input Line Energized: 1-pole, 2 & 5A models: 100mA. 1-pole, 10A models: 150mA. 2-pole, 2 & 5A models: 150mA. 2-pole,10A models: 240mA. Contact Ratings: 10A contacts: 10A resistive @ 30Vdc. 5A inductive @ 30Vdc. 5A resistive @ 115 Vrms, 400 Hz 3A inductive @ 115 Vrms, 400 Hz 5A contacts: 5A resistive @ 30Vdc. 1.5A inductive @ 30Vdc. 3A resistive @ 115 Vrms, 400 Hz 1A inductive @ 115 Vrms, 400 Hz 2A contacts: 2A resistive @ 30Vdc. 1A inductive @ 30Vdc. 1A resistive @ 115 Vrms, 400 Hz 0.3A inductive @ 115 Vrms, 400 Hz Specifications by Model Number Fixed Timer Adjustable Timer Input Temperature Contact Contact Model Number Model Number Voltage Range Rating Arrangement 5601 5701 DC -55C to +85C 2 Amp 1 Form C (SPDT) 5602 5702 DC -55C to +85C 2 Amp 2 Form C (DPDT) 5605 5705 DC -55C to +85C 5 Amp 1 Form C (SPDT) 5606 5706 DC -55C to +85C 5 Amp 2 Form C (DPDT) 5610 5710 DC -55C to +85C 10 Amp 1 Form C (SPDT) 5611 5711 DC -55C to +85C 10 Amp 2 Form C (DPDT) 5621 5721 DC -55C to +125C 2 Amp 1 Form C (SPDT) 5622 5722 DC -55C to +125C 2 Amp 2 Form C (DPDT) 5625 5725 DC -55C to +125C 5 Amp 1 Form C (SPDT) 5626 5726 DC -55C to +125C 5 Amp 2 Form C (DPDT) See next page for complete ordering information and outline dimensions for the available enclosures. Environmental Specifications Temperature Range: -55C to +85C or -55C to +125C. Vibration: 20 G's, 10 - 2,000 Hz. Shock: 50 G's, 11 1ms duration. Insulation Resistance: 1,000 megohms, min., at 500Vdc. Dielectric Strength: 1,000Vrms, 60 Hz., at sea level, all terminals to case. Sealing: Hermetic, 1.3 in. (33.0mm) of mercury. Life: 100,000 operations, min. (2A and 5A models); 50,000 operations, min. (10A models); Weight: 8.5 oz (240g) max. Adjustable Timing Formula (4700 types) The resistance required to obtain timing within this range is determined by using the formula: Rx = 400K (T/Tmax.) - 40K, where Rx = External Resistance in Ohms, T - Desired Time in Seconds, and Tmax. = Maximum Time (Code). A high quality deposited carbon 1%, 0.1W (min.) resistor is recommended for external resistance. Available Enclosures A-C-D-E A-C-D-E D-E D-E D-E D-E A-C-D-E A-C-D-E D-E D-E Timing Diagram CONTROL ON OFF ON OFF OUTPUT ON OFF INPUT <--- DELAY --- > Apply input power. Upon application of control power, the output will energize. Remove control power and initiate delay period. Special Notes 10Vdc mimimum must be applied for a minimum duration of 20ms to energize output and initiate timing. Units rated 10A have a minimum time delay of 100ms. (c) 2005 by Tyco Electronics Corporation. All Rights Reserved. CII and TYCO are trademarks. Other products and company names mentioned herein may be trademarks of their respective owners. 1 Catalog 8-1773439-1 Revised 4-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 High Performance Electronic Products 5600/5700 Series Delay On Release Timers (Continued) Part Numbering System Typical Part Number 5722 -C - 1102 Model Number: Four digit code from table on the previous page. Mounting (see outline dimension drawings): A = Studs on bottom of 2.5 in tall case C = Studs on side of 2.5 in. tall case D = Studs on bottom of 1.812 in. tall case E = Bracket on side of 1.812 in. tall case Timing Code: Four-digit code for any value between 50ms and 600s for fixed (5600) timers and between 50ms and 240s for adjustable (5700) timers. The timing code consists of four digits and gives the time in ms. The first three digits are the significant figures and the last digit is the number of zeros following the significant figures; thus 50 ms would be coded 0500, 1.1 s would read 1101, and 1 m (60 s) would be 6002. Adjustable timers cover one decade, e.g., 62 ms to 620 ms. The upper decade limit is Tmax. in the timing formula and is the the value defined by the timing code in the part number. Note: Units with 10A contacts have a minimum time delay of 100ms. A typical part number for an adjustable timer would be 5722-C-1102. This DC unit is in the -55C to +125C temperature range with a 2 amp contacts in a 2 form C (DPDT) arrangement, enclosed in case with a style "C" mounting, with a maximum time delay of 11s. Outline Dimensions .625 [15.875] 2.491 MAX. 2.09 [63.27] [53.09] .305 [7.747] .875 [22.22] 1.812 MAX. [46.02] 1.812 [46.02] 2.50 MAX. [63.5] 2.50 MAX. [63.5] .063 MAX. [1.60] 1.25 [31.75] .281 MAX. [7.14] .547 [13.89] .469 MAX. [11.91] .375 [9.53] INDEX DOT #4-40 UNC-2A 4 PLACES 1.0 MAX. [25.4] .625 [15.875] #4-40 UNC-2A 4 PLACES .380 TYP. [9.53] .875 1.25 MAX. [22.22] [31.75] INDEX DOT 1.542 [39.17] 1.187 [30.15] 1.542 [39.17] .063 MAX. [1.60] 1.187 1.542 [30.15] [39.17] 1.0 MAX. [25.4] 1.25 MAX. [31.75] Mounting Option C Mounting Option A 1.542 [39.17] INDEX DOT #6-32 UNC-2A 4 PLACES .281 MAX. [9.53] INDEX DOT .063 MAX. [1.60] .81 DIA. [20.57] MAX. .531 [13.49] .375 [9.53] .625 [15.875] .810 DIA. [20.57] MAX. Mounting Option D Mounting Option E Wiring Diagrams - 5600 Series (Fixed) - AUX. INPUT AUX. INPUT + + CONTROL + 1 Form C 2 Catalog 8-1773439-1 Revised 4-05 www.tycoelectronics.com 5700 Series (Adjustable) - - AUX. INPUT AUX. INPUT TIMING RESISTOR + CONTROL + 2 Form C Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. CONTROL + 1 Form C USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 + CONTROL + TIMING RESISTOR 2 Form C South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967